Instrukcja obsługi JBL MS-BassPro SQ

JBL subwoofer MS-BassPro SQ

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JBL MS-BassPro SQ (10 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
OWNER’S MANUAL
MS-BassPro SQ
powered automotive subwoofer
2
IntrOductIOn
Thank you for choosing the JBL® MS-BassPro SQ powered automotive
subwoofer. The MS-BassPro SQ has been designed to deliver outstanding
bass performance from a compact, easily installed powered subwoofer
enclosure.
To get the best performance from your MS-BassPro SQ, we strongly
recommend that installation be entrusted to a qualified professional.
Although these instructions explain how to install the MS-BassPro SQ in
a general sense, they do not show specific installation methods that may
be required for your particular vehicle. If you do not have the necessary
tools or experience, do not attempt the installation yourself. Instead,
please ask your authorized JBL car audio dealer about professional
installation.
In order that we may better serve you should you require warranty
service, please retain your original sales receipt and register your
MS-BassPro SQ online at www.jbl.com.
Included IteMs
InstallIng the suBwOOfer
InstallatIon WarnIngs and tIps
• Always wear protective eyewear when using tools.
• Disconnect the vehicle’s negative (–) battery terminal before starting
the installation.
• Check clearances on both sides of a planned mounting surface. Be
sure that screws or wires will not puncture brake lines, fuel lines or
wiring harnesses, and that wire routing will not interfere with the safe
operation of the vehicle.
• When making electrical connections, make sure they are secure and
properly insulated.
• I f you must replace the MS-BassPro SQ’s fuse, be sure to use the same
type of fuse and current rating as that of the original.
MountIng the subWoofer
Choose a location for the subwoofer that doesn’t interfere with cargo,
a fold-down rear seat or the trunk lid. The best location is usually a
corner of the trunk or cargo area, as shown in the illustrations. These
locations, in addition to being out of the way, will provide the best sonic
reproduction in the 60Hz to 100Hz range because the woofer output
will be “corner loaded” against the vehicle’s walls. In any case, the
MS-Basspro SQ must not interfere with the safe operation of the vehicle.
3
www.jbl.com
English
cOnnectIOns
IMPORTANT: Disconnect the vehicle’s negative (–) battery terminal
before beginning installation.
AUDIO SENSE SWITCH:
No remote turn on connection is necessary because the MS-BassPro SQ
includes signal sensing turn on, which will turn the subwoofer on when
it receives an audio signal at its input connectors. The subwoofer will
automatically turn off approximately five minutes after the input signal
ceases.
If your audio system’s source unit includes a remote turn on wire and you
would prefer to use it, defeat the signal sensing turn on circuit by moving
the Audio Sense switch to the “off” position.
CONNECTING THE SUBWOOFER TO YOUR VEHICLE’S AUDIO
SYSTEM
The JBL MS-BassPro SQ is equipped with two line-level (RCA) input
connectors that can handle line-level and speaker-level input signals. Use
RCA audio cables to connect the subwoofer to source units with preamp-
level outputs; use the supplied bare wire-to-RCA adapters to connect the
subwoofer to source units that don’t have RCA output connectors. Consult
the following system application diagrams to help you plan the installation
of your MS-BassPro SQ. For additional installation suggestions, contact
your local authorized JBL car audio dealer.
If your car audio system’s head unit has front or rear stereo line-
level outputs:
Use a stereo RCA audio cable (not supplied) to connect the MS-BassPro
SQ to the head unit’s front or rear left and right line-level outputs.
L. Front
Speaker
L. Rear
Speaker Audio System
Head Unit Left/Right
Line-Level
Outputs
Stereo RCA Audio Cable
(not supplied)
R. Front
Speaker
R. Rear
Speaker

Specyfikacje produktu

Marka: JBL
Kategoria: subwoofer
Model: MS-BassPro SQ

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JBL MS-BassPro SQ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer JBL

JBL

JBL ARC SUB Instrukcja

31 Grudnia 2025
JBL

JBL SSW-4 Instrukcja

26 Grudnia 2024
JBL

JBL SSW-2 Instrukcja

26 Grudnia 2024
JBL

JBL 800.4GTi Instrukcja

25 Grudnia 2024
JBL

JBL ARC SUB10 Instrukcja

25 Grudnia 2024
JBL

JBL Cinema Sound CSS10 Instrukcja

25 Grudnia 2024
JBL

JBL Grand Touring GTO1212BP Instrukcja

25 Grudnia 2024
JBL

JBL Grand Touring GTO1214BR Instrukcja

25 Grudnia 2024
JBL

JBL Cinema Vision CVSUB50 Instrukcja

25 Grudnia 2024
JBL

JBL Decade DS100 Instrukcja

25 Grudnia 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

Pioneer

Pioneer TS-W257D2 Instrukcja

13 Stycznia 2025
Vonyx

Vonyx SWP15 Instrukcja

13 Stycznia 2025
Kicker

Kicker 51MWF104 Instrukcja

13 Stycznia 2025
Kicker

Kicker 51MWF124 Instrukcja

13 Stycznia 2025
Kicker

Kicker 48CWR154 Instrukcja

12 Stycznia 2025
Deaf Bonce

Deaf Bonce Machete MFX30D2 Instrukcja

11 Stycznia 2025
Kicker

Kicker 51MWE104 Instrukcja

10 Stycznia 2025
Kicker

Kicker 51MWE124 Instrukcja

10 Stycznia 2025
Phoenix Gold

Phoenix Gold ZP12D4 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZP12D2 Instrukcja

9 Stycznia 2025