Instrukcja obsługi JBL Creature

JBL system hi-fi Creature

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JBL Creature (6 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision: A
Page
1
of
6
Harman Multimedia Confidential
English
Français
Español
Deutsch
Italian

Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision: A
Page
2
of
6
Harman Multimedia Confidential
Safety Instructions
Please read the following operation precautions before use
:
Introduction
The Creature is the latest innovation from JBL, a long time leader in the manufacture of high-end component and computer audio systems.
JBL’s audio heritage combined with continual research has provided the unique technologies included in the Creature.
The Harman Multimedia Odyssey Plus transducer is a unique full range transducer designed specifically for extremely small speaker
enclosures while providing significant mid bass. In addition to the bass, the small, rigid and light inverted aluminum cone provides performance
that will rival any tweeter used in multimedia speakers today. The result is a small and elegant satellite speaker that perfectly integrates with
the subwoofer while providing superior midrange and highs.
The Magnum series subwoofer transducer provides deep bass. This Magnum series of subwoofers are designed specifically to match with the
Harman Multimedia Odyssey Plus transducers. The same approach of providing solid bass from a small enclosure guided the development of
these Magnum transducers.
As described in the section of the user’s guide, the bottom left and right corners of the control/right speaker feature Using the speaker system
- + and buttons. Briefly touching the appropriate button will cause a small step increase or decrease in the system volume. Touching the
appropriate button for more than 0.5 seconds will cause the volume to increase or decrease rapidly while that button is touched.
Treble, Bass level adjust knobs are located on front of the subwoofer unit. A system on/off switch is also provided on the rear of the subwoofer
unit. The system includes two desktop speakers and a subwoofer that can be placed either on the floor or on your desk. Both satellite
speakers and the subwoofer are magnetically shielded to provide the greatest protection against computer monitor image distortion.
Setup
Carefully unpack your speaker system and identify all components:
• A Control/Right Satellite speaker
• B Auxiliary/Left Satellite speaker
• C Subwoofer
• D Power Supply
• E Audio input cable
Connect the speaker system as shown in the Connecting the speaker system to sound card illustrations. Once the speaker
system is properly connected, turn on the power switch located on the rear of the subwoofer.
• Read instructions ---All the safety and operating instructions should be read thoroughly before attempting to operate this audio
system.
• Retain instructions for future reference.
• Heed warnings --- All warnings on this audio system and in the operating instructions should be adhered to.
• Follow instructions --- All operating and use instructions should be followed.
• TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE THIS UNIT, PLEASE REFER SERVICING TO QUALIFIED HARMAN MULTIMEDIA
CORPORATION SERVICE PERSONNEL.
• Do not expose the speakers to liquid or solvent.
• Never remove grille covers in order to service the speaker system. The speaker system does not contain any user serviceable
parts. Refer all servicing to the Harman Multimedia Technical Support Group.
• Do not expose the speaker system to temperature or humidity extremes, direct sunlight, excessive dust, or vibrations.
• Place the speaker system on a stable, level surface. Do not drop, apply excessive force to the controls, or put heavy objects on
top of the speaker.
• If cleaning is required, use a soft dry cloth. If necessary, use a damp cloth without any solvents.
• In order to protect the speaker system, avoid microphone feedback, continuous output from electronic musical instruments, or
distorted output from any signal source.
• Do not place the speakers close to fluorescent light sources, or neon light fixtures.
• Although the speakers are magnetically shielded, keep magnetic storage media (disks and tapes) at least four inches from the
speaker system in order to avoid data loss.
• WARNING: To reduce the risk of fire or electric shock, do not ex
p
ose this s
p
eaker s
y
stem to rain or moisture.
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision: A
Page
3
of
6
Harman Multimedia Confidential
Step 1 Connecting the speaker system to the computer:
• If you have an integrated sound solution or a stereo sound card; connect the green connector from the subwoofer into
the green jack on the computer.
• If you have a multi-channel sound card; connect the green connector from the subwoofer into the green jack on the
computer.
• If you have a portable computer; connect the green connector from the subwoofer into the headphone jack on the
computer.
Step 2 Plug the orange connector from the right/control satellite into the orange jack on the subwoofer.
Step 3 Plug the brown connector from the left satellite into the brown jack on the subwoofer.
Step 4 Plug the AC power supply jack into the subwoofer.
Step 5 Plug the AC plug into the wall outlet.
Step 6 Turn on the speaker set and adjust the volume accordingly.
Placement of speakers
The speakers are magnetically shielded and can be placed close to a computer monitor without distorting the image. For
optimal stereo imaging, separate the speakers from each other by a distance equal to your distance from the speakers.
The subwoofer’s sound is non-directional; therefore, it does not have to be placed in any particular relationship to the satellites.
The subwoofer is magnetically shielded and can be placed on the desktop, if desired. If the subwoofer is placed too close to a
computer monitor it can cause vibration on the monitor screen.

Specyfikacje produktu

Marka: JBL
Kategoria: system hi-fi
Model: Creature

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JBL Creature, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi JBL

JBL

JBL MP350 Classic Instrukcja

30 Września 2024
JBL

JBL EON ONE MK2 Instrukcja

20 Września 2024
JBL

JBL Link SW10 Instrukcja

5 Września 2024
JBL

JBL MS-8 Instrukcja

1 Września 2024
JBL

JBL Cinema SB 100 Instrukcja

26 Sierpnia 2024
JBL

JBL Creature Instrukcja

26 Sierpnia 2024
JBL

JBL CSM 28 Instrukcja

19 Sierpnia 2024
JBL

JBL Apex PA1502 Instrukcja

18 Sierpnia 2024
JBL

JBL Apex PA1254 Instrukcja

16 Sierpnia 2024
JBL

JBL EON ONE Compact Instrukcja

16 Sierpnia 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

Philips

Philips TAM3205M2 Instrukcja

14 Stycznia 2025
Philips

Philips TAM3505M2 Instrukcja

14 Stycznia 2025
OSD Audio

OSD Audio Nero Stream ARC Instrukcja

14 Stycznia 2025
Morel

Morel SUB-8X Instrukcja

14 Stycznia 2025
Morel

Morel BEAT-X Instrukcja

14 Stycznia 2025
Morel

Morel Sopran 634 Instrukcja

14 Stycznia 2025
Klipsch

Klipsch HD Theater 500 Instrukcja

14 Stycznia 2025
Lenco

Lenco MC-129 MP3 Instrukcja

13 Stycznia 2025
Terratec

Terratec HA-1 Charge Instrukcja

13 Stycznia 2025
Thomson

Thomson MIC400BT Instrukcja

12 Stycznia 2025