Instrukcja obsługi JAR Systems Flex-Share CSE-1615

JAR Systems Niesklasyfikowane Flex-Share CSE-1615

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JAR Systems Flex-Share CSE-1615 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Flex-Share Charging Station
CSE-1615
Owners Manual
Revision B
For a copy of the most up-to-date guide, please contact a
JAR Systems representative or visit:
www.JAR-Systems.com/Support
WARNINGS:
Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment,
or voiding of factory warranty. It is the installer’s responsibility to make sure all mounting systems are properly assembled and
installed using the instructions provided.
Failure to provide adequate structural strength for this mounting system can result in serious personal injury or damage to
equipment. It is the installer’s responsibility to make sure the structure to which this mounting system is attached can support
five times the combined weight of all equipment. Reinforce the structure as required before installing the mounting system. Any
wall to which the mount is being attached may have a maximum drywall thickness of 5/8” (1.6cm).
Exceeding the weight capacity can result in serious personal injury or damage to equipment. It is the installer’s responsibility to
make sure the combined weight of all components attached to this mount does not exceed 100 lbs.
Do not stack more than two units. Only use manufacturer supplied stacking hardware and follow instructions included with
stacking hardware for installation.
Use this mounting system only for its intended use as described in these instructions. Do not use attachments not recommended
by the manufacturer.
Never operate this mounting system if it is damaged. Contact JAR Systems for replacement or repair.
This unit must always be used by adults or with adult supervision.
Do not use this unit outdoors.
Liquids should not be stored in, set on, or placed inside this unit.
If the unit is being used or transported on an AV cart or charging cart, the unit must be secured down to the cart.
WARRANTY:
This product comes with a five-year warranty that covers any defects in material or workmanship and extends to the original
consumer of the product only. JAR Systems LLC will replace the product with a new or refurbished product, repair the product,
send replacement parts, or refund the purchase price of the product, at JAR Systems LLC’s discretion. This warranty does not cover
accidental damage, unreasonable use, neglect, tampering or other causes not arising from defects in material or workmanship.
Any implied warranties last only as long as the warranty periods listed above except where state law does not allow limitations
on how long an implied warranty lasts. This includes but is not limited to the implied warranties or merchantability and fitness.
JAR Systems LLC’s responsibility is limited to the actions listed above and nothing else.
This warranty does not cover, and JAR Systems, LLC will not be responsible for, any damages due to loss of use of the product,
or any other costs or expenses incurred by you or anyone else who uses the product, whether due to defects, breach of contract,
negligence, strict liability or otherwise. JAR Systems is not liable for any indirect, special, incidental or consequential damages
related to the product or this warranty. Some states do not allow exclusions or limitations on consequential or incidental damages,
so these limitations or exclusions may not apply.
This warranty gives you specific legal rights and you may also have other rights that vary from state to state. This warranty is
governed by the laws of Florida, excluding its conflict of laws principles, unless your state requires that its law be used.
1. For Additional Support Call: 866.393.4202 or Email Support@JAR-Systems.com
Install the power strip in one of three possible positions with
4 screws and nuts.
Position 1: Recommended for most usage for wall
or desk installations: Power strip is positioned on the
inside of the unit with outlets facing in through the
opening in the back.
Position 2: Alternative position for desktop usage:
Power strip is positioned on the of the unit outside
with outlets facing in through the opening in the back.
Position 3: Alternative position for wall-mount usage:
Power strip is mounted to bottom side of chassis with
outlets facing upward.
2
3
1
2. For Additional Support Call: 866.393.4202 or Email Support@JAR-Systems.com
REVERSIBLE POWER STRIP
The power strip can be mounted on either the front or back side
by reversing the mounting brackets. Loosen the three screws
on each side, rotate the bracket, and replace the screws.
Position #1 Position #2
Installing the Power Strip

Specyfikacje produktu

Marka: JAR Systems
Kategoria: Niesklasyfikowane
Model: Flex-Share CSE-1615

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JAR Systems Flex-Share CSE-1615, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane JAR Systems

JAR Systems

JAR Systems Flex-Share CSE-1615 Instrukcja

11 Września 2024
JAR Systems

JAR Systems Essential CS-1210 Instrukcja

10 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024