Instrukcja obsługi JANDY EE-Ti

JANDY pompa ciepła EE-Ti

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JANDY EE-Ti (96 stron) w kategorii pompa ciepła. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/96

H0335800 Rev H

Jandy® Heat Pumps

Model EE-Ti







WARNING

 This product must be installed by a licensed HVAC technician certied in heat

pump repair and maintenance by the jurisdiction in which the product will be installed where such

state or local requirements exists. The technician must possess and comply with all certications and

regulations regarding the purchasing, handling, transportation and reclamation of R410A refrigerant.

In the event no such state or local requirement exists, the installer or maintainer must be a

professional with sufcient experience in pool equipment installation and maintenance so that all of

the instructions in this manual can be followed exactly. Before installing this product, read and follow

all warning notices and instructions that accompany this product. Failure to follow warning notices

and instructions may result in property damage, personal injury, or death. Improper installation and/

or operation can create an electrical hazard which can cause serious injury, property damage, or

death. Improper installation and/or operation will void the warranty.

Page 1

ENGLISH

Zodiac

Jandy

Heat Pumps Model EE-Ti | Installation and Operation Manual



 

1.1 Introduction ......................................................... 3

1.2 Consumer Information and Safety ...................... 3

1.2.1 Spa/Hot Tub Safety Rules ............................ 3

1.2.2 Swimming Pool Energy Saving Tips ............ 4

1.3 Warranty ............................................................. 4

1.4 Codes and Standards ......................................... 4

1.5 Technical Assistance ........................................... 5

1.6 Materials Needed For Installation ....................... 5

1.6.1 Materials for All Installations ........................ 5

1.6.2 Recommended Materials for Installations .... 5

1.7 Specifications ...................................................... 5

1.7.1 General Specifications ................................. 5

1.7.2 Dimensions .................................................. 5

1.7.3 Technical Specifications ............................... 5

 

2.1 General Information ............................................ 5

2.2 Location Requirements ....................................... 5

2.2.1 Introduction .................................................. 5

2.2.2 Clearances ................................................... 7

2.2.3 Equipment Pad ............................................ 8

2.2.4 Condensation and Drainage ........................ 8

2.2.5 Lawn Sprinklers ........................................... 8

2.2.6 Roof Run-off ................................................. 8

2.2.7 Installation of Anchor Clamps ...................... 8

 

3.1 Plumbing Layout ................................................ 9

3.2 Water Connections at Heat Pump ...................... 9

3.3 Check Valve Installation ...................................... 9

3.4 Automatic Flow Control Valve ........................... 10

3.5 Multiple Unit Installation .................................... 10

3.5.1 Heat Pump and Heater Combination ......... 10

3.5.2 Multiple Heat Pump Connections ............... 10

 

4.1 General Information .......................................... 10

4.2 Main Power ....................................................... 16

4.3 Bonding ............................................................. 16

4.4 Pump Connection (Maintain Temp Feature) ..... 16

4.5 Optional Remote Controls ................................ 17

4.5.1 Connection to a Remote Pool-Off-Spa

Selector (3-Wire Connection) ..................... 17

4.5.1.1 Install the Remote Pool-Off-Spa

Selector ................................................ 17

4.5.1.2 Configure the Control Panel ................ 17

4.5.2 Two-Wire Connection to an AquaLink® RS

or TSTAT .................................................... 17

4.5.2.1 Configure the AquaLink RS Control

System ................................................. 17

4.5.2.2 Install the Remote TSTAT .................... 17

4.5.2.3 Configure the Control Panel ................ 18

4.5.3 Four-Wire Connection to AquaLink® RS

485 Communication ................................... 18

4.5.4 Connection to a Secondary User Interface 19

 

5.1 Initial Start-up Precautions ................................ 19

5.2 Operating the Controller ................................... 19

5.2.1 Off Mode .................................................... 19

5.2.2 Pool Mode - (Normal Heat) ........................ 19

5.2.3 Pool Mode - (Optional Maintain Heat) ........ 20

5.2.4 Spa Mode - (Normal Heat) ......................... 20

5.2.5 Spa Mode - (Optional Maintain Heat) ........ 20

5.3 Operating Features of Hybrid Units with

Optional Chiller ................................................. 20

5.3.1 Pool Mode - (Normal Chill) ......................... 20

5.3.2 Pool Mode - (Optional Maintain Chill) ........ 20

5.3.3 Spa Mode - (Optional Maintain Chill) ......... 21

5.4 User Setup Options .......................................... 21

5.4.1 Language Setup ......................................... 21

5.4.2 Temperature Scale Setup .......................... 21

5.4.3 Spa Timer Setup ........................................ 21

5.4.4 Display Light Setup .................................... 21

5.5 Set Point Lockout .............................................. 22

5.6 Water Pressure Switch Adjustment ................... 22

 

6.1 Water Chemistry ............................................... 23

6.2 Winterizing ........................................................ 23

6.3 Spring Start-Up ................................................. 24

6.4 Inspection and Service ..................................... 24

6.4.1 Owner Inspection ....................................... 24

6.4.2 Professional Inspection .............................. 24

 



7.1 Heat Pump Design ............................................ 25

7.2 Heat Pump Components and Operation ........... 25

 

8.1 Troubleshooting Guide...................................... 26

8.2 Diagnostics ....................................................... 27

 

9.1 Ordering Information ......................................... 28

9.2 Zodiac EE-Ti Heat Pumps Parts List ................ 28

9.3 Zodiac EE-Ti Heat Pumps Exploded View ....... 29

Specyfikacje produktu

Marka:	JANDY
Kategoria:	pompa ciepła
Model:	EE-Ti

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JANDY EE-Ti, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pompa ciepła JANDY

JANDY JE3000T Instrukcja

21 Września 2024

JANDY JE2000T Instrukcja

20 Września 2024

JANDY JE3000T3 Instrukcja

19 Września 2024

JANDY JE3000TR3 Instrukcja

18 Września 2024

JANDY JE2500T3 Instrukcja

18 Września 2024

JANDY EE-Ti Instrukcja

28 Maja 2024

JANDY JE3000TR Instrukcja

22 Maja 2024

JANDY JE2500T Instrukcja

10 Maja 2024

Instrukcje pompa ciepła

Najnowsze instrukcje dla pompa ciepła

Viessmann Vitocal 300-G tot 45 kW Instrukcja

14 Stycznia 2025

Dimplex DHW 300D Instrukcja

12 Stycznia 2025

Dimplex SI LI 20TES Instrukcja

12 Stycznia 2025

Dimplex SIW 8TES Instrukcja

12 Stycznia 2025

Dimplex WI 95TU Instrukcja

12 Stycznia 2025

Dimplex LA 1728 Instrukcja

12 Stycznia 2025

Dimplex WI 65TU Instrukcja

11 Stycznia 2025

Baxi Platinum BC iPlus V200 Instrukcja

11 Stycznia 2025

Nibe S1256 Instrukcja

9 Stycznia 2025

Calorex C-PAC+ Instrukcja

3 Stycznia 2025