Instrukcja obsługi James M1000

James odbiornik M1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla James M1000 (20 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
1000W (4 ohm and 70V) DSP SUBWOOFER AMPLIFIER
USER MANUAL
V1.8b
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a damp cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
15. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
16. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
17. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
18. WARNING: The Class I apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
APPLICABLE FOR USA CANADA OR WHERE APPROVED FOR USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE PLUG TO WIDE SLOT INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND.
Page 2
INTRODUCTION
The James M1000 is a high performance, class D, subwoofer amplifier capable of delivering a minimum of
1000W of clean power at 4 ohms. It uses advance DSP technology to allow sophisticated optimization of the
amplifier’s parameters to match the subwoofer being used and the environment in which the subwoofer is
installed. The M1000 features a large LCD display and 5 button controller to allow configuration of all DSP
settings. On the front panel there are black-out indicators for power, standby, clipping and signal presence.
The M1000 is a natural choice for every
INSTALLING RACK MOUNT EARS
If you plan to install your M1000 into a standard 19-inch rack, you must install the supplied rack ears.
(1) Remove the 6 screws from the sides n ear the front of the M1000 (3 on each side).
(2) Using the same screws, attached the supplied rack ear s to the M1000. If required, the 4 feet can also be
removed at this time by unscrewing the feet mounting screws located in the center of each foot.
(3) Due to the weight of the M1000, it is recommended th at the rear flanges be secured to the rear rack rails.
Hardware to do this is not supplied with the amplifier and is specific to the type and depth of rack you are
using. You are responsible to source the proper hardware to secure the rear mounting points.
Rear Rack Mounting Tab Installing Front Rack Ears
CAUTION!
The M1000 amplifier is convection cooled and does not use a fan to eliminate noise and allow it to be
used in the listening environment. For this reason, ensure there is adequate ventilation above and below
the amplifier when rack mounted. Avoid placing heat generating equipment below it in the rack. If the
M1000 does not receive enough ventilation, if may overheat and switch to standby mode.
AC LINE VOLTAGE
The M1000 can be used on 110V-120V, 60Hz or 220v-240V, 50Hz AC lines. To change the operating line
voltage:
(1) Turn the power off using the rear power switch.
(2) If required, remove the IEC line cord and replace wi th an IEC AC cable that matches the AC wall socket.
NOTE: This should be a 10A rated cable.
Page 3
Upon startup, the display will show the firmware revision number.
James subwoofer installation.

Specyfikacje produktu

Marka: James
Kategoria: odbiornik
Model: M1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z James M1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik James

James

James M1000 Instrukcja

4 Stycznia 2025
James

James GXD 8 Instrukcja

4 Stycznia 2025

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Audibax

Audibax Miami Instrukcja

5 Stycznia 2025
Audibax

Audibax Kansas Instrukcja

5 Stycznia 2025
AudioControl

AudioControl Epic Four Instrukcja

5 Stycznia 2025
Audibax

Audibax Zone 360 BT Instrukcja

5 Stycznia 2025
Audibax

Audibax Dayton 120T BT Instrukcja

5 Stycznia 2025
Audibax

Audibax Akron 2-2400 Instrukcja

5 Stycznia 2025
Audibax

Audibax Dayton 600 Instrukcja

5 Stycznia 2025
Audibax

Audibax Flint Kit Instrukcja

5 Stycznia 2025
Audibax

Audibax PA4250T Instrukcja

5 Stycznia 2025
Audibax

Audibax PA4500T Instrukcja

5 Stycznia 2025