Instrukcja obsługi Jam Classic 2.0 HX-P190

Jam Kołyska/stacja dokująca Classic 2.0 HX-P190

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Jam Classic 2.0 HX-P190 (3 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P190
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P190)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: http://canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Classic 2.0 needs about 2 hours for up to 5 hours of party time.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH® CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one
between your device and the speaker’s . Here’s how it works:Bluetooth
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has .Bluetooth
2. Turn on the speaker (press and hold the power button for 3 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Classic 2.0 in your device’s list or click YES. Bluetooth
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
Thank you for purchasing
the . JAM Classic 2.0
Check out the sections
below for all the
important information
about your new speaker.
Continued on page 2.
AC adapter not included.
or
2h
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
1. Power button: press and hold for 3 seconds to
power on.
2. Check out how much juice is in the battery
3. Volume down / Previous track
4. Play & pause / Answer & hang up
5. Volume up / Next track
6. Lets you know when is pairedBluetooth
7. Micro USB cord goes here
8. Here’s where you hook it up old-school 3
6
78
5
2
1
4
Bluetooth®
Devices
JAM CLASSIC 2.0
on
>
3s
Bottom: The LED lights on your speaker let
you know what it’s doing.
Pairing Mode
Bluetooth Light Battery Light
Connected Charging
Ready to PartyAux-In Mode
Low Battery
BLUETOOTH® CONNECTION, CONTINUED
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and will find each other every time, as long as the Bluetooth
speaker is set to and your device’s is, you know, on.Bluetooth Bluetooth
If you’re connecting to a computer, you may have some extra steps on that
end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If
prompted, enter “0000” as the code.
To disable pairing of existing device and pair a new device press and hold
the + and - button for 5 seconds to activate pairing mode.
Note: If you turn on your Classic 2.0 but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the JAM Classic 2.0 will automatically shut off to preserve battery power.
When friends call asking to join the party — and you know they will — answer the phone without disconnecting from your JAM Classic
2.0. Yes, that’s right. Your speaker is a speakerphone, too. How amazing is that? Here’s how it works:
1. Make sure your phone and speaker are connected through .Bluetooth
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Classic 2.0.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Classic 2.0 for 3 seconds to ignore the call.
THE COOLEST PART: The Classic 2.0 knows when a call is coming in and pauses the music before ringing. When you hang up, the
music starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Classic 2.0
automatically does its hands-free thing. Isn’t it refreshing to know your speaker totally gets you?
Check out the chart below for a complete guide on handling calls with your Classic 2.0.
COMING CLEAN
A soft, dry towel is all you need to
clean off your speaker. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it.
HOOKING UP OLD-SCHOOL AUDIO, JACK
HELLO? SPEAKERPHONE? YES!
1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up —
or down if you’re lame.
You’ll have to play and pause the music from
your device, not your speaker. No problem.
You’re there anyway, right?
2m 15m
1 YEAR LIMITED WARRANTY
For detailed warranty instructions and information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: http://canada.jamaudio.com/warranty-1yr
To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
Auxiliary cable not included.
Situation
Short Press Play/Pause Button Long Press Play/Pause Button
1
st
Incoming call
2
nd
Incoming call
On call
Both calls active
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
Reject call
Move call from speaker to device
Reject call 2
Switch between 1st call and 2nd call
STUFF THE GOVERNMENT MAKES US SAY STUFF OUR LAWYERS MAKE US SAY
A MESSAGE FROM THE ENVIRONMENT
FCC Compliance:
Note: This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by HMDX
could void the user's authority to operate this equipment.
IC Caution: RSS-GEN Issue 4 December 2014
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
• WARNING: Do not place speakers too close to ears. May cause
damage to eardrums, especially in young children.
• Use this product only for its intended use as described in this
manual. Do not use attachments not recommended by HMDX.
• HMDX is not liable for any damage caused to smartphones,
iPod/MP3 players, or any other device.
• Do not place or store this product where it can fall or be dropped
into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable,
or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water or
cleaning solvents.
Attention California Residents:
WARNING: This product contains chemicals known to the State
of California to cause cancer, birth defects, and other
reproductive harm.
WARNING:
This product has an internal, non-replaceable lithium battery. Please
dispose in accordance with your local, state, province, and country
guidelines.
This product contains small parts that may present a choking hazard
for young children.
CAUTION: All servicing of this product must be performed by
authorized HMDX Service Personnel only.
©2016 HMDX. All Rights Reserved.
IB-HXP190

Specyfikacje produktu

Marka: Jam
Kategoria: Kołyska/stacja dokująca
Model: Classic 2.0 HX-P190

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Jam Classic 2.0 HX-P190, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kołyska/stacja dokująca Jam

Jam

Jam Splash Instrukcja

5 Października 2024
Jam

Jam Thrill HX-P320 Instrukcja

4 Października 2024
Jam

Jam Touch HX-P550 Instrukcja

15 Września 2024
Jam

Jam Replay HX-P250 Instrukcja

3 Września 2024
Jam

Jam Storm Instrukcja

3 Września 2024
Jam

Jam Party Instrukcja

2 Września 2024
Jam

Jam Chill Out HX-P202 Instrukcja

30 Sierpnia 2024
Jam

Jam Symphony HX-W14901 Instrukcja

28 Sierpnia 2024
Jam

Jam Classic 2.0 HX-P190 Instrukcja

27 Sierpnia 2024
Jam

Jam XT Instrukcja

23 Sierpnia 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Pyle

Pyle PHST92IBK Instrukcja

15 Stycznia 2025
Polk

Polk BOOM Bit Instrukcja

13 Stycznia 2025
Anker

Anker SoundCore Flare Instrukcja

11 Stycznia 2025
Magnavox

Magnavox MMA3645 Instrukcja

7 Stycznia 2025
Magnavox

Magnavox MMA3639 Instrukcja

7 Stycznia 2025
BenQ

BenQ beCreatus GR10 Instrukcja

3 Stycznia 2025
IOPLEE

IOPLEE IOPEXTSPKER405G Instrukcja

2 Stycznia 2025
LogiLink

LogiLink QP0027 Instrukcja

1 Stycznia 2025
LogiLink

LogiLink QP0026 Instrukcja

1 Stycznia 2025
LogiLink

LogiLink QP0029 Instrukcja

1 Stycznia 2025