Instrukcja obsługi Jabra GN1000

Jabra system hi-fi GN1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Jabra GN1000 (31 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/31
1
User guide
Bedienungsanleitung
Guide d’utilisation
Manual del usuario
Guia do utilizador
Istruzioni d’uso
Gebruikershandleiding
Brugsanvisning
Bruksanvisning
Käyttöohje
UK
D
F
ES
P
I
NL
DK
S
FIN
2
8
14
20
26
32
38
44
50
56
1558-369
GN1000_contents.indd 1 11-03-2003, 14:15:09
2 3
About the GN 1000 RHL
When affi xed to your telephone, the GN 1000 RHL mechanically lifts/lowers your tele-
phone’s handset from/to its cradle and remotely communicates with your headset. This
allows you to answer and terminate telephone calls, even while away from your desk.
Assembling and assembly verifi cation
Assembling the product involves locating and preparing the mount-
ing area as well as affi xing the platform. To assemble the product:
1. Take the product from the packaging and remove the quick set up
sleeve from the platform.
2. Locate the handset area of your telephone, as this is where the
product’s platform will be affi xed. In general, you will affi x the
platform on the telephone, as close as possible to the handset’s
receiver.
3. Line up the top edge of the platform as illustrated.
4. Remove the protective fi lm from the adhesive pad on the bottom
of the platform.
Note: The adhesive pad affi xes fi rmly to any surface. Ensure you
have determined the correct location before affi xing the adhesive
pad.
5. Affi x the platform fi rmly to the telephone with the adhesive pads,
as close as possible to the handset’s speaker.
Note: If you are unable to affi x the platform with the adhesive
pads, use the hook and loop fasteners.
English - GN 1000 Remote Handset Lifter user guide
Thank you for choosing the GN 1000 Remote Handset Lifter (RHL) by GN Netcom,
which will provide you with the full benefi ts of GN Netcom cordless products. The
GN 1000 RHL is designed exclusively for use with GN Netcom cordless products.
This user guide will give you information and instructions on assembling, using and
maintaining your GN 1000 RHL and contains the following sections:
• About the GN 1000 RHL
• Assembling and assembly verifi cation
• Features and customisation
• Answering and making telephone calls
• Frequently asked questions
• Operational and safety information
A Connector cord G Ring Sensor
B On-line indicator H Adhesive pads
C Lifter Arm height control I External socket (back)
D Lifter Arm (extendable; 2 positions) J Ring Sensitivity control (back)
E Housing K Ring Sensor on/off button
F Platform L AUX plug
GN 1000 RHL Accessories
M External Ring sensor
N Hook and Loop fasteners
O Adapter kit (see instructions in adapter kit bag)
GN1000_contents.indd 2-3 11-03-2003, 14:15:09
4 5
6. Position the ring sensor on the centre of the telephone speak-
er.
Note: On most telephones the speaker is located underneath
the handset. If you are unsure of the speaker’s location, have
someone call you and note the precise location where the ring-
ing tone comes from.
7. Insert the AUX plug of the connector cord into the AUX socket
at the bottom of the base unit of your cordless headset.
After assembling the product, verify that the product is working cor-
rectly. Complete the following steps:
1. Set your cordless headset to headset mode by pressing the
multifunction/line button on your cordless headset or remote
unit.
If the product is working properly, the lifting arm will lift the
handset out of the telephone’s cradle and you will hear the dial
tone in the headset.
2. If there is no dial tone, adjust the lifting arm height with the
lifting arm height control. The + raises the lifting arm and the
- lowers the lifting arm.
Note: If you still do not hear a dial tone, extend the Lifter Arm
from its factory-set position.
Features and customisation
On-line indicator
The on-line indicator lights when your handset is lifted and you
have a dial tone, and fl ashes continuously when you have deacti-
vated the ring sensor.
Adjusting the Ring Sensor sensitivity
The ring sensor detects the telephone’s ring and is factory pre-set
to most standard telephones. The ring sensor may, however, need
adjustment to recognise a less common telephone ring tone. Raise
and lower the ring sensor’s sensitivity by adjusting the ring sensitiv-
ity control on the back of the unit.
The ring sensor is set correctly when the on-line indicator lights to
indicate an incoming telephone call. If the on-line indicator does not light when the tele-
phone rings, have someone call you and turn the ringer sensitivity control clockwise
until the on-line indicator is lit.
If you have unsuccessfully tried to increase ring sensor sensitivity, mount the external
ring sensor by completing the following:
1. Mount the plug of the external ring sensor to the external socket of the product.
2. Remove the protective fi lm on the external ring sensor and attach it as close as pos-
sible to the telephone’s speaker.
3. Readjust the ring sensor’s sensitivity if the on-line indicator does not light when an
incoming call is received.
Answering and making telephone calls
To answer a telephone call, press the multifunction/line button on
your cordless headset or remote unit. The product will then auto-
matically lift the handset and put the call through.
To terminate a telephone call, press the multifunction/line button on
your cordless headset or remote unit. The product will now lower
the telephone handset and terminate the call.
Note: When using your telephone in speakerphone mode, e.g. for
a conference call, deactivate the ring sensor by pressing the ring
sensor on/off button to the off mode. The on-line indicator will fl ash
when the ring sensor on/off button is in the off mode.
Press the ring sensor’s on/off button to the on setting when you
have completed your speakerphone call.
GN1000_contents.indd 4-5 11-03-2003, 14:15:14

Specyfikacje produktu

Marka: Jabra
Kategoria: system hi-fi
Model: GN1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Jabra GN1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Jabra

Jabra

Jabra M5390 Instrukcja

20 Września 2024
Jabra

Jabra JX20PURA Instrukcja

11 Września 2024
Jabra

Jabra BT135 Instrukcja

10 Września 2024
Jabra

Jabra BT3010 Instrukcja

5 Września 2024
Jabra

Jabra BT250 Instrukcja

3 Września 2024
Jabra

Jabra GO6470 Instrukcja

31 Sierpnia 2024
Jabra

Jabra LINK220 Instrukcja

30 Sierpnia 2024
Jabra

Jabra BT205 Instrukcja

28 Sierpnia 2024
Jabra

Jabra GN1000 Instrukcja

21 Sierpnia 2024
Jabra

Jabra UC Voice 550 Instrukcja

19 Sierpnia 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

Philips

Philips TAM3205M2 Instrukcja

14 Stycznia 2025
Philips

Philips TAM3505M2 Instrukcja

14 Stycznia 2025
OSD Audio

OSD Audio Nero Stream ARC Instrukcja

14 Stycznia 2025
Morel

Morel SUB-8X Instrukcja

14 Stycznia 2025
Morel

Morel BEAT-X Instrukcja

14 Stycznia 2025
Morel

Morel Sopran 634 Instrukcja

14 Stycznia 2025
Klipsch

Klipsch HD Theater 500 Instrukcja

14 Stycznia 2025
Lenco

Lenco MC-129 MP3 Instrukcja

13 Stycznia 2025
Terratec

Terratec HA-1 Charge Instrukcja

13 Stycznia 2025
Thomson

Thomson MIC400BT Instrukcja

12 Stycznia 2025