Instrukcja obsługi J. Rockett Audio Designs Tim Pierce


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla J. Rockett Audio Designs Tim Pierce (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Controls
!Drive: Controls the level of grit and/or overdrive f
grit/overdrive when cascaded with the boo
!Level: Controls the volume for the OD side and contributes to the volume control when
cascaded with the boost side.
!Bass: Controls the bass and/or fatness of the OD side or contributes to the bass and/or
fatness when cascaded with the boost side.
!Tone: Controls the brightness and/or presence of the OD side or contributes to the
brightness and/or presence when cascaded with the boost side.
!P. Amp Switch: Engages the “power amp” only or cascades it with the OD side.
!P. Amp Knob: Controls the volume of the boost or contributes to the output when cascaded with the
OD side.
!On/Off: Engages the pedal.
NOTE: The power amp section was created to emulate the 5881 servo tube found in the Naylor SD60.
Even if you engage the “power amp” section at unity volume, it will add a certain amp-like fatness to your
overall sound. You can also use it as a solo boost as well.
Power Supply
All J. Rockett Audio Designs pedals operate off of the standard BOSS type 9 volt adapter or a single 9 volt
battery. The power input is a 5.5 mm x 2.1 mm jack with the positive voltage on the outer sleeve. Using an
external power supply will automatically disconnect the battery. Disconnect the input jack to preserve battery
life when not in use or when not used with an appropriate, external power supply.
J. Rockett
J. Rockett
J. Rockett
J. RockettJ. Rockett Audio Designs
Audio Designs
Audio Designs
Audio Designs Audio Designs
2.1mm x 5.5 mm tip/negative plug
!
Warranty
J. Rockett Audio Designs LLC will repair or replace, at its discretion, defective workmanship or materials on all
new J. Rockett Audio Designs products directly or through the selling dealer or an authorized service technician
for one year from the date of purchase at no cost to the original purchaser. Repair and replacement parts
installed will be warranted for the unexpired portion of the original warranty term.
Before sending a product in for repair, please contact us at chris@rockettpedals.com or jay@rockettpedals.com
or call us at 760 419 1345.- -
This warranty does not cover shipping costs, product appearance or damages caused by accident, abuse,
misuse or alteration. A dated sales slip or order number (issued by a tech, dealer or J. Rockett Audio Designs)
must accompany a product being returned for warranty service. Repairs without a return authorization number
will be refused. Please allow four (4) weeks for warranty service. For more information please contact J.
Rockett Audio Designs via our website at www.rockettpedals.com or call us at
760 419 1345. No other warranty is expressed or implied.- -


Specyfikacje produktu

Marka: J. Rockett Audio Designs
Kategoria: Niesklasyfikowane
Model: Tim Pierce

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z J. Rockett Audio Designs Tim Pierce, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane J. Rockett Audio Designs

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024