Instrukcja obsługi IQAir PerfectPro

IQAir Niesklasyfikowane PerfectPro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IQAir PerfectPro (12 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
PerfectPro®and PerfectPro® C F
Installation Guide
Swiss Made
H VA C A i r F i l t ra t i o n S y s t e m
2
Safety Precautions - READ AND SAVE THESE INSTRUCTIONS
• Follow professional safety standards and all local codes for plumbing, electrical, and mechanical
considerations.
• Installations must be done in accordance with all applicable standards, building and electrical codes and
must be performed by quali ed personnel only.
• Do not cut into any air conditioning or electrical lines.
• Always disconnect the power supply from the HVAC before working on the system, changing lters, or
cleaning.
• This unit must be installed in an indoor location, protected from the elements.
• Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the
manufacturer at the address or telephone number listed in this document.
• Only use original IQAir lters and accessories. Use of non-IQAir parts or accessories may damage the system
and will void the warranty.
• If the unit is used during construction or renovation or in environments subject to heavy contamination,
check  lters regularly for prematurely clogged  lters.
• Always wear appropriate protective equipment, such as work gloves and safety goggles for service.
• Save these instructions for future reference.
Warranty Information
This air cleaning system is covered by a two (2) year limited warranty. If within from the two years
original purchase by the end user from the authorized dealer this air cleaning system or any part thereof
(with the exception of lters) is proved to be defective by reason only of faulty workmanship or materials, the
faulty item, or parts thereof, will be repaired or replaced free of charge for labor and materials. The warranty
for replaced parts and service work will expire automatically with the termination of the original system’s
warranty.
This warranty shall not apply to damage caused by misuse, wear and tear, neglect, unauthorized repair,
damage caused by installation, adaptation, modi cation or use in an improper manner or inconsistent with
operating and maintenance instructions, or to wear or deterioration resulting from environmental conditions
or to damage sustained during transport. No liability will be accepted under this warranty for any fault or
damage arising from defective workmanship, if the unit has been serviced, repaired or modi ed by any person
other than the manufacturer’s authorized service personnel or if the system’s serial sticker has been removed or
tampered with.
No shipping, handling or insurance costs for warranty repairs will be refunded. Obvious defects must be com-
municated to the authorized dealer within 10 days of the purchase date.
To secure your warranty rights and prevent transport damage, all products must be returned in original packa-
ging. Please keep the original packaging.
Important Safety Instructions
IQAir® reserves the right to change specifications contained in this document at any time and without prior notice.
©2020 IQAir® Group. All rights reserved. IQAir®, HyperHEPA®, PerfectPro®, and ColdFire® are the registered trademarks of the IQAir® Group. Patents pending.
3
Table of Contents
Page
Safety Precautions 2
Warranty Information 2
Chapter 1 – Air Cleaning Systems and Indoor Air Quality 4
1. 1 Improving Indoor Air Quality 4
1. 2 PerfectPro® Operational Principles 4
1. 3 Application Considerations 5
Chapter 2 – Product Data 6
2. 1 Dimensions and Weight 6
2. 2 Replacement Filter and Order Numbers 6
2. 3 Diagrams and Dimensions 6
Chapter 3 – Parts & Tools 7
3. 1 Equipment Packaging 7
3. 2 Tools Required 7
Chapter 4 – Installation Instructions 8
Chapter 5 – Installation Examples 9
Up- ow furnace 9
Down- ow furnace 9
Horizontal furnace 9
Chapter 6 – Filter Replacment Instructions 10
Chapter 7 – IQAir Technical Support 11
7. 1 Technical Support 11
7. 2 Ordering Replacement Filters 11
7. 3 Contact Information 11
Important Note: In the event of a defect occurring, please contact your point of purchase immediately and
describe the defect. Before any product is returned for service or repair, please seek the express prior permis-
sion from your point of purchase. Your dealer reserves the right to refuse any return shipment which is received
without prior permission. Such shipments may be returned at the original sender’s cost.
The permission to return products does not constitute an acceptance of liability. Upon receipt, the returned
product will be inspected carefully. Should the fault be covered by the terms of this warranty, the product will
be repaired free of charge. Should the fault not be covered by the warranty, a repair and transport quote will be
issued which needs to be accepted in writing before repair work will be carried out.

Specyfikacje produktu

Marka: IQAir
Kategoria: Niesklasyfikowane
Model: PerfectPro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IQAir PerfectPro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane IQAir

IQAir

IQAir PerfectPro Instrukcja

16 Września 2024
IQAir

IQAir AirVisual Outdoor Instrukcja

15 Września 2024
IQAir

IQAir HealthPro 250 Instrukcja

13 Września 2024
IQAir

IQAir PF40 Instrukcja

13 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025