Instrukcja obsługi IOTAVX SA3

IOTAVX odbiornik SA3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IOTAVX SA3 (13 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/13
SA 3 Owner Manual 1
Integrated Amplifier
SA 3
EN
SA 3 Owner Manual 2
PLEASE READ THESE IMPORTANT SAFETY INSTRUCTIONS AND KEEP IN A SAFE PLACE
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heaters, stoves, or another apparatus (including
amplifiers) that produces heat.
9. Do not override the safety features of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong, are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plug points, socket and at s
the point that they exit from the unit.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as when a power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been droppe d.
• Refer to the manufacturer’s operating instructions for power requirements. Be advised that
different operating voltages may require the use of different line cords and/or attachment
plugs.
• Do not install the unit in an unventilated rack.
• Never attach audio power amplifier outputs directly to any of the unit’s connectors.
15. The user should not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio or television reception .
This can be determined by turning the equipment off and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different to the one that the receiver is connected to.
• Consult the dealer or an experienced radio/television technician for help.
EN
SA 3 Owner Manual 3
RECYCLING IN EUROPEAN UNION COUNTRIES
This symbol on the product or on its packaging means that your electrical and
electronic equipment should be disposed at the end of life separately from your
household wastes. There are separate collection systems for recycling in EU.
For more information, please contact the local authority or the dealer where you purchased
the product.
WARNING
WARNING: to reduce the risk of fire or electric shock, do not expose this appliance to
rain or moisture.
CAUTION: To prevent the risk of electric shock, do not remove cover (or back); no user
serviceable parts inside. Refer servicing to qualified service personnel.
THE LIGHTNING FLASH with arrow-head symbol is intended to alert the user to the
presence of un-insulated «dangerous voltage» within the product’s enclosure that
maybe of sufficient magnitude to constitute a risk of electric shock to persons.
An appliance and cart combination should be moved with care. Before any
transportation, your product must be packed correctly avoid any damage. to
I M P O R T A N T
EN

Specyfikacje produktu

Marka: IOTAVX
Kategoria: odbiornik
Model: SA3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IOTAVX SA3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik IOTAVX

IOTAVX

IOTAVX NP3 Instrukcja

2 Października 2024
IOTAVX

IOTAVX PA3 Instrukcja

2 Października 2024
IOTAVX

IOTAVX SA3 Instrukcja

2 Października 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024