Instrukcja obsługi ION RECORD 2 PC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ION RECORD 2 PC (16 stron) w kategorii Dźwięk. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16

RECORD 2 PC
QUICKSTART GUIDE
ENGLISH ( 3 – 4 )
MANUAL DE INICIO RÁPIDO
ESPAÑOL ( 5 – 6 )
GUIDE D'UTILISATION SIMPLIFIÉ
FRANÇAIS ( 7 – 8 )
GUIDA RAPIDA
ITALIANO ( 9 – 10 )
KURZANLEITUNG
DEUTSCH ( 11 – 12 )
SNELSTARTGIDS
NEDERLANDS ( 13 – 14 )

3
RECORD 2 PC QUICKSTART GUIDE
CONNECTING THE RECORD 2 PC
The ION Audio RECORD 2 PC is a plug-and-play device, which means that there are
no drivers to install. The first time you connect it to your computer, it will
automatically install all the necessary driver components and be ready to use.
IMPROVING AUDIO QUALITY
If you are experiencing unexpected noise, hiss or distortion in your recordings, here are a few things you can do to improve
the quality of your sound as you use RECORD 2 PC:
• Use higher-quality RCA cables when connecting your sound source to RECORD 2 PC.
• Connect RECORD 2 PC to a different USB port on your computer. (USB ports on the rear panel typically work best.)
• Close all software applications other than your recording application (e.g., EZ Vinyl/Tape Converter).
• If you are using a laptop, disconnect your laptop's power supply.
• Experiment with connecting your computer and/or sound source to different power outlets (or the same power outlet).
• Experiment with repositioning RECORD 2 PC and other audio cables away from possible noise sources (e.g.,
computers, power cables, speakers, amps, etc.)
• Ensure the connections between all your devices are secure (including the grounding wire of your record player, if it
has one).
• Visit www.ionaudio.com/computer-optimization for more information on optimizing your computer for audio.
AUDIO SETUP
In most cases (especially if you are using Windows) RECORD 2
PC will be automatically selected as your computer's default
recording device. If you find you are unable to record any audio
with RECORD 2 PC, follow the instructions below for your
operating system.
Also, be sure your audio software program is set up to receive
audio via RECORD 2 PC. This can usually be done in your
software's "Preferences" or "Device Setup." Please consult your
software manual for more information.
WINDOWS XP
1. Go to Start Menu Control Panel Sounds
and Audio Devices.
2. Click the "Audio" tab.
3. Under "Sound Recording," make sure USB
Audio CODEC is selected as the default device,
then click "OK."
WINDOWS VISTA
1. Go to Start Menu Control Panel Sound.
(If you don't see Sound, select "Switch to Classic
View," and the Sound Control Panel should
become available.)
2. Select the "Recording" tab.
3. Make sure Microphone – USB Audio CODEC is
set as the default device, then click "OK."
SYSTEM REQUIREMENTS:
y PC: Windows XP, Vista or 7
y Mac: OS X or higher
y USB Port
IMPORTANT:
• Adjust the volume dial (on the side of
RECORD 2 PC) to prevent distortion at loud
volumes.
• When using RECORD 2 PC with turntables,
set its switch to "PHONO." When using it with
Specyfikacje produktu
Marka: | ION |
Kategoria: | Dźwięk |
Model: | RECORD 2 PC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ION RECORD 2 PC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Dźwięk ION

5 Lipca 2024

5 Lipca 2024

5 Lipca 2024

5 Lipca 2024

5 Lipca 2024
Instrukcje Dźwięk
- Dźwięk Sony
- Dźwięk Yamaha
- Dźwięk Logitech
- Dźwięk Philips
- Dźwięk Gigabyte
- Dźwięk JBL
- Dźwięk Roland
- Dźwięk Geemarc
- Dźwięk Nokia
- Dźwięk Bose
- Dźwięk Behringer
- Dźwięk Profoon
- Dźwięk Siemens
- Dźwięk DAP-Audio
- Dźwięk Kenwood
- Dźwięk Trust
- Dźwięk Focusrite
- Dźwięk Velleman
- Dźwięk Korg
- Dźwięk Zoom
- Dźwięk Cardo
- Dźwięk Sennheiser
- Dźwięk Jabra
- Dźwięk Samson
- Dźwięk Olympus
- Dźwięk TC Helicon
- Dźwięk NEC
- Dźwięk FiiO
- Dźwięk Advance Acoustic
- Dźwięk Fender
- Dźwięk AKG
- Dźwięk Topcom
- Dźwięk Power Dynamics
- Dźwięk Advanced Bionics
- Dźwięk Amplicom
- Dźwięk Alto Professional
- Dźwięk Reflecta
- Dźwięk Sony Ericsson
- Dźwięk Speedlink
- Dźwięk Envivo
- Dźwięk Aliph
- Dźwięk Sweex
- Dźwięk Phonak
- Dźwięk Mr Handsfree
- Dźwięk Gear4
- Dźwięk T-Mobile
- Dźwięk Bluetrek
- Dźwięk Starkey
- Dźwięk Iqua
- Dźwięk Bellman Symfon
- Dźwięk HUMANTECHNIK
- Dźwięk Griffin
- Dźwięk Plawa
- Dźwięk Native
- Dźwięk Inakustik
- Dźwięk Plextor
- Dźwięk Timewave
- Dźwięk Gioteck
- Dźwięk Nxzen
- Dźwięk MCS
- Dźwięk Velodyne
- Dźwięk Datel
- Dźwięk Bang Olufsen
- Dźwięk Bellman
- Dźwięk Konig Electronic
- Dźwięk Xqisit
Najnowsze instrukcje dla Dźwięk

14 Stycznia 2025

28 Września 2024

28 Września 2024

28 Września 2024

28 Września 2024

28 Września 2024

28 Września 2024

28 Września 2024

28 Września 2024

28 Września 2024