Instrukcja obsługi Iomega SuperSlim

Iomega Inne akcesoria komputerowe SuperSlim

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Iomega SuperSlim (18 stron) w kategorii Inne akcesoria komputerowe. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/18
1
ENGLIS
H
S I AFETY NSTRUCTIONS
1. Please read these safety instructions carefully.
2. Please keep this User’s Manual for your reference.
3. Please disconnect the equipment from your AC outlet before cleaning.
Do not use liquid or sprayed detergent for cleaning.
Use moist sheet or cloth for cleaning.
4. For pluggable equipment, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
5. Please keep this equipment away from humid areas.
6. Install this equipment on a reliable surface. If the equipment is not on a reliable surface,
it may drop and cause injury.
7. The openings on the enclosure are for air convection. Please protect the equipment from
overheating . DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is appropriate when connecting the
equipment to the power outlet.
9. Place the power cord where people will not step or trip on it. Do not place objects over
the power cord.
10. All Cautions and Warnings on the equipment should be noted.
11. If the equipment is not in use for several days, disconnect the equipment from the power
outlets to avoid damage by transient power surges.
12. Never pour any liquids into the openings, this could cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should only be opened by
qualified service personnel.
14. If one of the following situations arises, get the equipment checked by a qualified
service personnel:
(a) The power cord or plug is damaged.
(b) Liquid has penetrated into the equipment.
(c) The equipment has been exposed to moisture.
(d) The equipment has not worked well or you can not get it to work according to the
user’s manual.
(e) The equipment was dropped and damaged.
(f) If the equipment has obvious signs of damage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED;
STORAGE TEMPERATURE ABOVE 60℃(140℉), IT MAY DAMAGE THE
EQUIPMENT. The sound pressure level at the operators position according to IEC704-
1:1982 is equal or less than 70dB(A)
16. DANGER: Invisible laser radiation when opened. Avoid direct exposure to beam.
Complies with FDA radiation performance standards,21 CFR, subchapter J.
Laser power: Wave Length: 783±3nm (CD); 658±3nm (DVD)
Emission power:0.7mW
Laser diode: class 3b
2
ENGLIS
H
P RECAUTIONS
!! Do not attempt to open the drive and
service it. Removing the cover may
cause exposure to harmful laser beams
and electrical voltage. User is
recommended to get service by
returning the defective drive back to
the original vendor where the drive was
purchased.
• Use the original package for transporting the drive or sending back for service. The
original packing was designed and tested to protect your drive under rough conditions.
• Do not put this drive in direct sunlight, on heating units, or near electrical appliances
which draw large amounts of current.
• Use a soft, dust-free cloth for cleaning your drive. Keep your drive away from moisture or
liquids including water, cleaning-fluids, or solvents.
• Keep your disc clean. Using a soft, dust-free cloth to clean the surface of the disc before
recording will improve the burning data integrity.
• Do not drop or jolt the drive.
• Keep the area around the drive clean from dust, smoke, and other contaminants.
• The copyright law of each country governs the reproduction of copyrighted works. The
person using the drives may be liable for its use to make unauthorized copies of
copyrighted works.
• It will increase the success rate for copying the data from HDD, instead of copying the
data by "copy on the fly mode". Therefore we recommend the user reserving sufficient
buffer space for creating an image file (at least 650MB for CD; 5GB for DVD; and if your
drive support Double Layer DVD+R writing, then at least 9GB space is needed).
3
ENGLIS
H
T C ABLE OF ONTENTS
INTRODUCTION
What the DVD Writer Does…………………………………………4
Format Compatibility…………………………………………………4
Recording Modes………………………………………………………5
What You Can Do with the DVD Writer……………………………5
System Configuration
System Requirements…………………………………………………6
Features and Controls
Front View……………………………………………………………7
Rear View……………………………………………………………8
INSTALLATION
USB 2.0 Users
Installing USB Driver for Windows 98SE………………………………9
Connection…………………………………………………………………….10
Installing the Drive……………………………………………………....11
OPERATION
Installing Necessary Device Drivers……………………………12
Loading and Unloading the Tray………………………………12
Recording CDs & DVDs
About Software & Manuals…………………………………………13
Recommended Recordable & ReWritable Media………………13
Playing CDs & DVDs
Playback Software……………………………………………………14
Playing Audio CDs…………………………………………………14
Playing DVDs for the First Time…………………………………15
TROUBLESHOOTING
Read Problems……………………...…………………………………16
Write Problems……………………………….…………………………17

Specyfikacje produktu

Marka: Iomega
Kategoria: Inne akcesoria komputerowe
Model: SuperSlim

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Iomega SuperSlim, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Inne akcesoria komputerowe Iomega

Iomega

Iomega SuperSlim Instrukcja

31 Sierpnia 2024

Instrukcje Inne akcesoria komputerowe

Najnowsze instrukcje dla Inne akcesoria komputerowe

Dell

Dell WD19DC Instrukcja

14 Października 2024
Lenco

Lenco IPT-223 Instrukcja

13 Października 2024
Origin Storage

Origin Storage OSDOCK-MMUSBCA Instrukcja

9 Października 2024
Origin Storage

Origin Storage OSDOCK-USBC Instrukcja

9 Października 2024
Origin Storage

Origin Storage OSDOCK-USB3 Instrukcja

9 Października 2024
Goobay

Goobay 62106 Instrukcja

9 Października 2024
Goobay

Goobay 45835 Instrukcja

9 Października 2024
Goobay

Goobay 66255 Instrukcja

9 Października 2024
Urban Factory

Urban Factory TCD01UF Instrukcja

9 Października 2024
Kensington

Kensington SD1700P Instrukcja

9 Października 2024