Instrukcja obsługi Iogear GVE340


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Iogear GVE340 (2 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
1 x GVE340 Transmitter
1 x GVE340 Receiver
1 x Power Adapter (For transmitter)
2 x IR Extender cables
Transmitter
Transmitter
Transmitter
Receiver
Receiver
- HDMI output from source
- HDMI input to display
The GVE340 HDMI HDBaseT-Lite Extender extends an HDBaseT signal
up to 70m from the HDBaseT source using one Cat 5e/6/6a cable.
GVE340 supports RS-232 and IR signal pass-through, allowing you to
control the HDMI source device from the remote unit (GVE340R) while
also allowing access to the HDMI display device from the local unit
(GVE340T) as an HDMI local pass-through. IR signals can also be
extended in both directions.
The GVE340 features Power over HDBaseT (POH) which can send
power over Cat 5e/6/6a cable without an additional power supply.
The GVE340 is HDMI (3D, Deep Color, 4k) and HDCP compatible. The
GVE340 is perfect for a digital entertainment center or any installation
that requires superior video quality.
1. Link LED
2. Power LED
3. F/W Upgrade Port and Switch
4. IR Port (Connect to IR Receiver)
1. Connect the HDMI Input Port on the GVE340T to the HDMI Output
Port on your video source device using HDMI cable.
left view
right view
left view
right view
2. Connect one end of the RJ-45 cable to the HDBaseT output port
on the transmitter. Then connect the other end of the RJ-45 cable
to the HDBaseT input port on the receiver.
2 x Terminal blocks
1 x Quick Installation Guide
1 x Warranty Card
5. RS-232 Port
6. HDMI Input Port
7. HDBaseT Output Port
8. Power Jack
3
4
5
6
1
2
7
8
1. HDMI Out LED
2. LInk LED
3. Power LED
4. HDBaseT Input Port
5. Power Jack (Optional)
6. F/W upgrade switch
7. IR Port (Connect to IR Receiver)
8. RS-232 Port
9. HDMI Output Port
3
4
5
6
1
2
7
8
9
Video Source
Quick Start Guide
GVE340
PART NO. Q1527
www.iogear.com
HDBaseT HD Extender with RS-232
and IR Support
Receiver
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com
3. Connect the HDMI Output Port on the GVE340R to the HDMI
Input Port on your video display device using HDMI Cable.
You can connect RS-232 serial devices/peripherals to the GVE340, such
as touchscreens or bar code scanners. The RS-232 signal transmission
flow is shown in the following example:
From a source device, the RS-232 signal is transmitted (Tx) to the
GVE340T receiving (Rx) unit; the GVE340R transmits (Tx) signals to the
display device (Rx).
4. Plug the power adapter cable into the power jack on the GVE340T.
Video Display
5. (Optional) Plug the power adapter cable into the power jack on the
GVE340R.
Receiver
Transmitter
6. (Optional) Connect your computer or controller system to the
terminal block on the GVE340 to serial commands.
7. (Optional) Connect an IR Transmitter/Receiver to the IR port on
the GVE340.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
FCC Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
Limited Warranty
This product carries a 3 Year Warranty. For the terms and conditions of
this warranty, please go to http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number


Specyfikacje produktu

Marka: Iogear
Kategoria: przedłużacz AV
Model: GVE340

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Iogear GVE340, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje przedłużacz AV Iogear

Iogear

Iogear GWAVRC Instrukcja

27 Września 2024
Iogear

Iogear GWSSKIT Instrukcja

27 Września 2024
Iogear

Iogear GWHD11 Instrukcja

27 Września 2024
Iogear

Iogear GW4K30GH60 Instrukcja

27 Września 2024
Iogear

Iogear GVE440 Instrukcja

27 Września 2024
Iogear

Iogear GVE340 Instrukcja

27 Września 2024
Iogear

Iogear GWAVR Instrukcja

27 Września 2024
Iogear

Iogear GWMHDKIT22 Instrukcja

27 Września 2024
Iogear

Iogear GWHDMS52 Instrukcja

27 Września 2024
Iogear

Iogear GWHD2DKIT Instrukcja

27 Września 2024

Instrukcje przedłużacz AV

Najnowsze instrukcje dla przedłużacz AV