Instrukcja obsługi Inverx X80


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Inverx X80 (24 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
INVERX AI-WIRELESS
ROBOTIC POOL CLEANER
USER MANUAL
Model: X30 / X45 / X / X8060
THANK YOU FOR PURCHASING THE INVERX AI-WIRELESS ROBOTIC POOL CLEANER.
Please read the manual thoroughly before installing or using the product.
Keep this manual for future reference.
EN
IMPORTANT WARNINGS & SAFETY INFORMATION
This manual contains important information about the installation, operation, and safe use of this product. This information should be given
to the owner and/or operator of the robot. When installing and using the robot, basic safety precautions should always be followed. Failure
to follow safety warnings and instructions in this manual can result in serious injury and/or damage to your equipment. Read and follow all
warning notices and instructions which are included in this manual.
GENERAL WARNINGS
• Read the instructions before operating the robot.
• The robot is designed for pool cleaning; do not use it for any other purpose.
• Keep the robot out of the reach of children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
• Children should not play with the robot.
• The robot must be maintained by a qualified professional except for simple routine maintenance written in this manual.
Installers/operators must follow manufacturer’s instructions and keep in compliance with national or local standards for installation. Under
no circumstances will the manufacturer be held responsible for any outcome incurred by failure to comply with applicable standards or
local regulations.
• Incorrect installation or use of the robot may cause serious damage to property or injuries to people, and will void the warranty.
• Do not use the robot when people or animals are in the pool.
Disclaimer: Information in this manual is intended to provide general information on a particular subject(s) in good faith and is not an
exhaustive treatment of such subject(s). Its use is beyond the control of the author, contributor, publishers, and distributors and should
not be relied upon without consulting your local Professional for comprehensive advice. This manual includes subject(s) that should only
be performed by or under the direction and advice of your local Professional and under no circumstances should the manual be used
as a substitute for such professionals. No representations or warranties are made that the content, advice, and recommendations in this
manual are current, free from errors or omissions, or appropriate for the user’s circumstances or abilities. No liability is accepted for any
loss suffered as a result of any user’s reliance on such content.
WARNINGS ON USE
• Only use the provided/genuine charger when charging the robot.
• Only charge the robot indoors.
• The robot’s charger MUST BE DISCONNECTED before conducting any maintenance on the robot.
• Do not operate the robot with wet hands.
• Do not try to repair the robot yourself or open the engine box. In case of malfunction or for any issues not covered in the Troubleshooting
Guide, please contact your authorised dealer.
• If there is any malfunction or release of odour from the robot when charging, disconnect it from the power supply immediately and contact
your authorised dealer.
• Use only genuine replacement parts supplied by the manufacturer for service and repair.
• For battery protection, the robot should be fully charged every 3 months.
• The magnetic safety cap should be re-inserted into the robot if the robot is not going to be used for more than 14 days.
• Do not expose the robot to extended periods of sun exposure. When the robot is not in use, ensure it is fully dry and store the robot in
an undercover, cool dry place away from direct sunlight.
• This product contains electrical equipment. Dispose of the product in accordance with local regulations.
GENERAL OPERATING CONDITIONS
• Water depth range: 1 – 2.5m. m
• Water temperature 4°C – 35°C. The of the robot may be affected when the water temperature is below 15°C.range: endurance time
• Pool water pH: 7.0 – 7.8
• Salt level: 5000ppm maximum
• Chlorine level: 4ppm, maximum
• To protect the motor, the robot will automatically stop running if the water depth is less than 40 centimeters.
• Do not use the robot during shock chlorination – remove the robot completely from the pool water.
• Do not use the robot during a thunderstorm.
• Do not charge the robot outdoors.
• Do not expose the robot to direct rainfall or sunlight for an extended period.
• Ensure the robot is completely dry before storing it away. When the robot is not in use, store it in an undercover, cool dry place away
from direct sunlight. Recommended storage temperature for the robot is between -10°C and 45°C, and relative humidity 30%-70%.
CAUTIONS
• To drain the water from the robot, place the robot on the edge of the pool and hold it on an angle to let the water drain out into the pool.
• Lift the robot slowly out of the water to prevent back injury.
• Clean the filter basket after each cleaning cycle.
• Do not lift the robot out of the water by its track(s).
REMINDER
• When the battery below 30%, it will clean the oor of the pool only. robot is
• Robot must be fully dry before storing.
• Filter basket should be cleaned thoroughly after each use, do not let debris dry up in the basket.
• Charger cable must be stored neatly without twists or tangles.
• Optimum storage temperature is -10 oC – 45oC
Table of Contents
SECTION 1. PRODUCT OVERVIEW ................................................................................................................. 4
1.1 Packaging Contents .............................................................................................................................. 4
1.2 Technical Specifications ........................................................................................................................ 5
1.3 Preparation......................................................................................................................................... 6 - 7
SECTION 2. OPERATION .................................................................................................................................. 8
2.1 Control Panel Buttons .................................................................................................................... 9 - 10
2.2 Startup and Operation of the Unit ................................................................................................ - 10 11
2.3 Pool with a Sloped Beach Entry .......................................................................................................... 11
2.4 Cleaning the Filter Basket .............................................................................................................. 12 13 -
2.5 Charging the Robot ........................................................................................................................ 13 14-
2.6 WIFI Connection ................................................................................................................................. 14
SECTION 3. MAINTENANCE........................................................................................................................... 14
3.1 Filter Maintenance .............................................................................................................................. 15
3.2 Impeller Maintenance ................................................................................................................... - 15 16
3.3 Replacing Worn Brushes ............................................................................................................. - 16 17
3.4 Replacing Worn Track Belts ........................................................................................................ - 17 19
SECTION 4. TROUBLESHOOTING ........................................................................................................ - 19 20
SECTION 5 SCHEMATICS. ...................................................................................................................... - 21 22
SECTION 6 WARRANTY. ................................................................................................................................ 23
SECTION 7 PRODUCT REGISTRATION. ....................................................................................................... 23


Specyfikacje produktu

Marka: Inverx
Kategoria: nieskategoryzowany
Model: X80

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Inverx X80, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Inverx

Inverx

Inverx X80 Instrukcja

19 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024