Instrukcja obsługi Intellinet 561815

Intellinet nieskategoryzowany 561815

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intellinet 561815 (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Important: Read before use. • Importante: Leer antes de usar.

16-Port Gigabit Ethernet

Switch

Instructions

Model 561815 (IES-16GDB)

For additional benets:

or go to: register.intellinet-network.com/r/561815

Scan to

product warranty

2English

Instructions

The Intellinet Network Solutions 16-Port Gigabit Ethernet Switch offers an array of time-saving,

cost-effective features while providing superior network throughput. No configuration is required

and installation is plug and play. Thanks to its optional desktop and 19” rackmount design, superior

performance and value, the switch is the perfect choice for your small office or home network. With

a backplane speed of 32 Gbps, plenty of performance is available for your computers, servers and

other networking devices. Each of the ports automatically senses the link speed of the connected

network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.

For specifications, visit . Register your product at intellinetnetwork.com

Green Ethernet Technology

More often than not, a network switch does not utilize all its ports at all times. Normally, when a

computer, notebook, network printer or other network-connected device is powered down, the

switch continues to consume the same amount of power as if the port were still active. Now, thanks

to the new, energy efficient IEEE 802.3az technology, this Intellinet Network Solutions switch detects

link status to all connected devices and reduces the power usage of ports not in use. In addition, the

switch can adjust the level of power output based on the length of the network cable connected to a

particular port. This feature allows for the enjoyment of maximum network performance, and when

things slow down, it automatically scales back power usage to conserve energy and save money.

LED COLOR STATUS STATUS DESCRIPTION

Power Off Power Off.

Green On Power On.

Link/Act/

Speed

Off No device is connected to the port.

Orange On A device is connected to the port at 10/100 Mbps speeds.

Green On A device is connected to the port at 1000 Mbps speeds.

Flashing Sending or receiving data.

Slide Switch

• : default mode; allows normal communication between ports 1 – 16.Normal

• Flow Control: disables the switch’s flow-control function.

• : isolates ports 1 – 14 from each other while allowing them to connect to VLAN

ports 15 and 16; increases the forwarding rate when broadcast storms occur.

• : allows ports 1 – 8 to achieve transmission distances Extend

up to 250 m (820 ft.) at a reduced speed of 10 Mbps.

Front Panel

English

Rear Panel

Power

Use the included power cord to connect the device (on the rear panel) to

an AC outlet. The device supports AC 100 – 240 V, 50/60 Hz.

Chassis Ground Column

Located on the side of the power supply connector, a grounding terminal connector is used to

provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis

grounding screw, it should be wired to an object that provides earth ground. In rackmount

installations, grounding is typically provided by the metal frame of the mounting rack.

Placement

Desktop Installation

Prior to use, it is recommended that the switch be placed/positioned on a level surface that

can support the weight of the switch (and possibly other objects) with at least 25 mm (approx.

1”) of clearance for ventilation; away from sources of electrical noise: radios, transmitters,

broadband amplifiers within 100 m (approx. 328’) of network devices it’s to be connected to.

Attach the rubber feet to the bottom of each corner of the switch to increase stability.

Rackmount Installation

The switch can be mounted in an EIA standard-sized, 19-inch rack. Attach the mounting brackets

on the switch’s side panels (one on each side) and secure them with the screws provided.

Use the screws provided with the equipment rack to mount the

Intellinet Network Solutions data switch on the rack.

Instructions

Specyfikacje produktu

Marka:	Intellinet
Kategoria:	nieskategoryzowany
Model:	561815
Kolor produktu:	Czarny
Źródło zasilania:	Prąd przemienny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	44 mm
Szerokość produktu:	280 mm
Głębokość produktu:	126 mm
Waga produktu:	1100 g
Podręcznik użytkownika:	Tak
Certyfikaty:	FCC Class A, CE, UKCA, NDAA
Standardy komunikacyjne:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Obsługa PoE:	Nie
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	5 - 90 %
Przewody:	Prąd przemienny
Pobór mocy:	10.1 W
Waga wraz z opakowaniem:	1600 g
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Obsługa sieci VLAN:	Tak
Możliwości montowania w stelażu:	Tak
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	16
Podstawowe przełączania Ethernet RJ-45 porty typ:	Gigabit Ethernet (10/100/1000)
Obsługa 10G:	Nie
Wielkość tabeli adresów:	8192 wejścia
Podpora kontroli przepływu:	Tak
Zgodny z Jumbo Frames:	Tak
Zasilacz dołączony:	Tak
Technologia okablowania Copper Ethernet:	10BASE-T, 100BASE-TX, 1000BASE-T
Store-and-forward:	Tak
Zakres przekazywania pakietów (100 Mbps):	148800 pps
Zakres przekazywania pakietów (10 Mbps):	14880 pps
Zestaw do montażu haków:	Tak
Obsługiwane typy kabli:	Cat3, Cat4, Cat5, Cat5e, Cat6, Cat6a
Zakres przekazywania pakietów (1 Gbps):	1488000 pps