Instrukcja obsługi Intellinet 561242

Intellinet nieskategoryzowany 561242

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intellinet 561242 (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

intellinetnetwork.com

24-Port Gigabit Ethernet PoE+

Switch with 2 SFP Ports and

LCD Screen Instructions

Model 561242

Important: Read before use. • Importante: Leer antes de usar.

24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports and LCD Screen

English

Instructions

LED COLOR STATUS STATUS DESCRIPTION

PWR Green O Power O

On Power On

LNK/ACT/

Speed

O No device connected.

Orange

(1 – 24)

On A device is connected to the port at 10/100 Mbps speed.

Flashing Sending or receiving data.

Green (1 –24,

SFPs 1 & 2)

On A device is connected to the port at 1000 Mbps speeds.

Flashing Sending or receiving data.

PoE Green

O No PSE/PoE device is linked.

On The connected device is receiving power.

Flashing Abnormal power supply.

Front Panel

Rear Panel

The Intellinet 24-Port Gigabit Ethernet Ultra PoE Switch with 2 SFP Ports and LCD Screen offers an array

of time-saving, cost-effective features while providing superior network throughput. No configuration is

required and installation is plug and play. Thanks to its optional desktop and 19” rackmount design, superior

performance and value, the switch is the perfect choice for your small office home or home network.

With a backplane speed of 52 Gbps, plenty of performance is available for your computers,

servers and other networking devices. Each of the ports automatically senses the link speed of the

connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum

performance. Designed to give ample power to compatible devices that need them, this PoE+

switch offers up to 30 watts of power per port until its power budget of 370 watts is reached.

Green Ethernet Technology

More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer,

notebook, network printer or other network-connected device is powered down, the switch continues to consume

the same amount of power as if the port were still active. Now, thanks to the new, energy efficient IEEE 802.3az

technology, this Intellinet switch detects link status to all connected devices and reduces the power usage of

ports not in use. In addition, the switch can adjust the level of power output based on the length of the network

cable connected to a particular port. This feature allows for the enjoyment of maximum network performance,

and when things slow down, it automatically scales back power usage to conserve energy and save money.

Power

Use the included power cord to connect the device (on the rear panel) to

an AC outlet. The device supports AC 100 – 240 V, 50/60 Hz.

Chassis Ground Column

Located on the right side of the power supply connector, the grounding terminal connector

is used to provide proper grounding for your Intellinet data switch. If you use the chassis

grounding screw, it should be wired to an object that provides earth ground. In rackmount

installations, grounding is typically provided by the metal frame of the mounting rack.

Instructions

English

PoE Status

24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports and LCD Screen

Placement

Power Usage

PD Light Load Protection

Overload Protection

PoE Shutoff

Short-circuit detected

Total PoE

Output

PoE

Budget

Over-voltage Protection Low-voltage Protection Over-temperature Protection

69.8

Example LED screen

Desktop Installation

Prior to use, it is recommended that the switch be placed/positioned on a level surface with at

least 25 mm (approx. 1”) of clearance for ventilation; away from sources of electrical noise: radios,

transmitters, broadband amplifiers within 100 m (approx. 328’) of network devices it’s to be connected

to. Attach the rubber feet to the bottom of each corner of the switch to increase stability.

Rackmount Installation

The switch can be mounted in an EIA standard-sized, 19-inch rack. Attach the mounting brackets on the switch’s side

panels (one on each side) and secure them with the screws provided.

Use the screws provided with the equipment rack to mount the Intellinet data switch on the rack.

The LCD screen displays the status of each port and provides valuable information

about crucial functions of the switch. See the description below for details.

Specyfikacje produktu

Marka:	Intellinet
Kategoria:	nieskategoryzowany
Model:	561242
Kolor produktu:	Czarny
Materiał obudowy:	Metal
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	44 mm
Szerokość produktu:	441.1 mm
Głębokość produktu:	204.3 mm
Waga produktu:	4000 g
Podręcznik użytkownika:	Tak
Poziom hałasu:	21.3 dB
Certyfikaty:	FCC Class A, CE, RoHS
Maksymalne zużycie mocy:	420 W
Standardy komunikacyjne:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Pełny dupleks:	Tak
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	0 - 45 °C
Zakres wilgotności względnej:	10 - 90 %
Układ:	1U
Przewody:	Prąd przemienny
Kod zharmonizowanego systemu (HS):	85176990
Diody LED:	Activity, Link, PoE, Power, Speed
Zakres temperatur (przechowywanie):	-10 - 70 °C
Liczba wentylatorów:	2 went.
Możliwości montowania w stelażu:	Tak
Typ przełącznika:	Nie zarządzany
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	24
Podstawowe przełączania Ethernet RJ-45 porty typ:	Gigabit Ethernet (10/100/1000)
Wielkość tabeli adresów:	8192 wejścia
Przepustowość rutowania/przełączania:	52 Gbit/s
Podpora kontroli przepływu:	Tak
Całkowita Power over Ethernet (PoE) budżetu:	370 W
Technologia okablowania Copper Ethernet:	10BASE-T, 100BASE-TX, 1000BASE-T
Automatyczne MDI/MDI-X:	Tak
Store-and-forward:	Tak
MTBF (Średni okres międzyawaryjny):	144000 h
Automatyczne wykrywanie:	Tak
Funkcje ochrony zasilania:	Over voltage, Overload, Short circuit
Zakres przekazywania pakietów (100 Mbps):	148800 pps
Zakres przekazywania pakietów (10 Mbps):	14880 pps
Zestaw do montażu haków:	Tak
Obsługiwane typy kabli:	Cat5, Cat5e
Power over Ethernet Plus (PoE +) ilość portów:	24
Pamięci bufora pakietów:	0.512 MB
Ilość slotów Modułu SFP:	2
Zasilanie przez Ethernet (PoE) zasilanie na port:	30 W
Zakres przekazywania pakietów (1 Gbps):	1488000 pps