Instrukcja obsługi Intel Edison Breakout Board Kit

Intel Niesklasyfikowane Edison Breakout Board Kit

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intel Edison Breakout Board Kit (32 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

Intel® Edison Kit for Arduino*

Hardware Guide

December 2014

Revision 004

- Document Number: 331191 004

Notice: This document contains information on products in the design phase of development. The information here is subject to change without

notice. Do not finalize a design with this information.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVI DED IN INTEL’S TERMS AND

CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A

PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death.

SHOULD YOU PURCHASE OR USE INTEL’S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL

AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST

ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF

PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT

INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.

Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or

characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no

responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without

notice. Do not finalize a design with this information.

Intel software products are copyrighted by and shall remain the property of Intel Corporation. Use, duplication, or disclosure is subject to

restrictions stated s Software License Agreement, or in the case of software delivered to the government, in accordance with the software in Intel’

license agreement as defined in FAR 52.227- 7013.

The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from

published specifications. Current characterized errata are available on request.

The code names presented in this document are only for use by Intel to identify products, technologies, or services in development that have not

been made commercially available to the public, i.e., announced, launched, or shipped. They are not "commercial" names for products or services

and are not intended to function as trademarks.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling

1- - - . 800 548 4725 or by visiting Intel’s website at http://www.intel.com/design/literature.htm

Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across

different processor families. See for details. http://www.intel.com/products/processor_number

Intel, the Intel logo, and Intel Atom are trademarks of Intel Corporation in the United States and other countries .

* Other brands and names may be claimed as the property of others.

Intel® Edison Kit for Arduino*

Hardware Guide December 2014

2 1- Document Number: 33119 004

Contents

1 Introduction ....................................................................................................................................................................... 6

1.1 Software requirements ............................................................................................................................................................... 6

1.2 Terminology .................................................................................................................................................................................... 6

1.3 References ........................................................................................................................................................................................ 6

2 Product Overview ............................................................................................................................................................. 7

2.1 Shield pin GPIO mapping .......................................................................................................................................................... 8

2.2 Pin function multiplexing control (summary) .................................................................................................................. 9

2.3 Pin function multiplexing control (detailed) .................................................................................................................. 10

2.4 GPIO interrupt support ............................................................................................................................................................ 11

2.5 Miscellaneous GPIOs............................................................................................................................................................... 11

2.6 Pin direction and pullup control ......................................................................................................................................... 12

3 - High Level Functional Description ............................................................................................................................. 13

3.1 Intel® Edison kit for Arduino* header signal list ........................................................................................................... 14

3.2 Intel® Edison kit for Arduino* PWM swizzler ................................................................................................................. 15

3.3 Intel® Edison kit for Arduino* analog inputs .................................................................................................................. 16

3.4 Intel® Edison kit for Arduino* signal pullup resistors ................................................................................................ 16

3.5 Intel® Edison kit for Arduino* USB interface .................................................................................................................. 16

3.6 Intel® Edison kit for Arduino* power supply .................................................................................................................. 17

3.7 Intel® Edison kit for Arduino* expansion mechanicals ............................................................................................. 17

4 Powering the Intel® Edison kit for Arduino*................................................................................................................18

4.1 Boot voltage selection – DCIN signal ................................................................................................................................ 19

5 Batteries............................................................................................................................................................................ 20

6 Layout................................................................................................................................................................................ 21

6.1 Antenna keepout ........................................................................................................................................................................ 21

6.2 Layout SD card, I2S, SPI, I2C ................................................................................................................................................. 21

6.3 LEDs .................................................................................................................................................................................................. 22

7 Handling ...........................................................................................................................................................................23

8 Debug UART and Low- Power Sleep Mode ................................................................................................................ 24

9 Buttons.............................................................................................................................................................................. 25

9.1 Software recovery (FWR_RCVR and RCVR_MODE) .................................................................................................... 25

10 Digikey sources ............................................................................................................................................................... 26

11 Shield pin configuration............................................................................................................................................... 27

11.1 Configure IO5 as a GPIO input, with pullup resistor disabled ............................................................................... 27

11.2 Configure IO11 as a GPIO input, with pullup resistor disabled .................................................................................. 28

11.3 Configure IO7 a as GPIO input, with pullup resistor enabled ........................................................................... 28

11.4 Configure IO6 a as PWM output........................................................................................................................................ 29

11.5 Configure IO14 as an ADC input ....................................................................................................................................... 29

11.6 IO18/IO19 Configure Ifor 2C connectivity..................................................................................................................... 30

11.7 Configure connectivity IO10 through IO13 for SPI ..................................................................................................31

Intel® Edison Kit for Arduino*

December 2014 Hardware Guide

Document Number: 331191- 3 004

Specyfikacje produktu

Marka:	Intel
Kategoria:	Niesklasyfikowane
Model:	Edison Breakout Board Kit
Typ produktu:	11
Wysokość produktu:	3.9 mm
Szerokość produktu:	25 mm
Głębokość produktu:	35.5 mm
Bluetooth:	Tak
Wersja Bluetooth:	4.0
Ilość portów USB:	1
Obsługiwane typy kart pamięci:	SD, SDHC
Wielkość pamięci flash:	4096 MB
Zakres częstotliwości:	2.4 - 5 GHz
Napięcie operacyjne:	1.8 V
Zakres temperatur (eksploatacja):	0 - 40 °C
Układ:	25mm x 35.5mm
Taktowanie procesora:	500 MHz
Model procesora:	Intel Quark SoC X1000
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11a, 802.11b, 802.11g
Kod zharmonizowanego systemu (HS):	8471500150
Przewodowa sieć LAN:	Nie
Bluetooth Low Energy (BLE):	Tak
Typ pamięci wewnętrznej:	LPDDR3
Prąd wyjściowy:	100 mA
Obsługiwane rodzaje pamięci:	DDR3-SDRAM
Maksymalna pojemność pamięci:	4 GB
Obsługa kanałów pamięci:	Dwukanałowy
Gniazdo procesora:	70-pin Hirose .4mm
Wersja USB:	2.0
Korekcja ECC:	Nie
Maksymalna pamięć wewnętrzna:	4096 MB
Napięcie wejściowe DC:	3.15 - 4.5 V
Zautomatyzowany system śledzenia klasyfikacji towarów (CCATS):	740.17B1
Nowe instrukcje AES (Intel® AES-NI):	Nie
Technologia Intel® Trusted Execution:	Tak
Maksymalna konfiguracja CPU:	1
Technologia Wirtualizacji Intel® (Directed I/O) (VT-d):	Nie
Technologia Intel® Clear Video:	Nie
Litografia procesora:	22 nm
Maksymalna pamięć wewnętrzna wspierana przez procesor:	4 GB
Pamięć ECC wspierana przez procesor:	Nie
Wbudowane opcje dostępne:	Nie
Wielkość opakowania procesora:	25mm x 35.5mm mm
Moduł TPM (Trusted Platform Module):	Nie
Prędkość zegara pamięci:	800 MHz
Karta graficzna on-board:	Nie
Szeregowe porty komunikacyjne:	2
Parytet FSB:	Nie
Technologia Intel® Anti-Theft (Intel® AT):	Nie
Intel® Flex Memory Access:	Nie
Intel® Fast Memory Access:	Nie
Technologia Intel® Dual Display Capable:	Nie
Intel® Rapid Storage Technology:	Nie
Intel® Matrix Storage Technology (Intel® MST):	Nie
Intel HD Audio Technology:	Nie
Intel® Active Management Technology (Intel® AMT):	Nie
Magistrala pamięci:	32 bit
Physical Address Extension (PAE):	Tak
Rozszerzenie PAE (Physical Address Extension):	32 bit
Architektura 64-bitowa:	Nie
Numer klasyfikacji kontroli eksportu (ECCN):	5A992C
Kwalifikowalność platformy Intel® vPro ™:	Nie
Port seryjny przez wewnętrzny nagłówek:	Tak
Segment rynku:	Komputer stacjonarny
Rodzaj pamięci Flash:	NAND
Typ portu audio:	I2S
Port równoległy przez wewnętrzny nagłówek:	Nie
Consumer Infrared Headers:	Nie
Przycisk Back-to-BIOS:	Nie
Kanały audio:	1
Płyta główna ARK ID:	84573
Technologia Intel® AC'97:	Nie
Technologia Intel® Client Initiated Remote Access (CIRA):	Nie
Intel® Remote PC Assist Technology (RPAT):	Nie
Intel® Quiet System Technology (QST):	Nie
Intel® Quick Resume Technology:	Nie
Technologia Intel® Remote Wake (Intel® RWT):	Nie
Zintegrowana sieć LAN:	Nie
Nazwa produktu:	Intel Edison Breakout Board Kit
Status:	Discontinued
Rodzina produktów:	Intel Edison
Ostatnia zmiana:	63903513
Urodzony:	Q3'14
Data premiery:	Q3'14
Seria produktów:	Intel Edison kit
Przewidywany termin dyskontynuacji:	06/16/2017
Obsługa Firewire:	Nie
Wymaga procesora z technologią Intel Graphics:	Nie
ARK ID:	84573
Model mikrokontrolera:	Intel® Quark
Rozmiar opakowania:	25 x 35.5 mm
Obsługa FSB:	N/A
Extended Life Program (XLP):	Nie
Dostępne opcje low halogen:	Nie
Parametry wejścia prądu stałego:	Nie
Taktowanie mikroprocesora:	100 MHz
Wbudowane WiFi:	Yes, 802.11n