Instrukcja obsługi Infinity Primus PS210

Infinity subwoofer Primus PS210

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity Primus PS210 (8 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Powered Subwoofer
PS210
Owner’s Guide
(120V)
2PS210 (120V)
Read First!
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other.A
grounding-type plug has two blades and a third
grounding prong.The wide blade or the third
prong is provided for your safety. If the provided
plug does not fit into your outlet,consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched, particularly at plugs, convenience
receptacles and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from
tip-over.
13. Unplug this apparatus during
lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15. Do not use attachments not recommended by
the product manufacturer, as they may cause
hazards.
16. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your product dealer
or local power company. For products intended to
operate from battery power, or other sources, refer
to the operating instructions.
17. If an outside antenna or cable system is
connected to the product, be sure the antenna
or cable system is grounded so as to provide
some protection against voltage surges and
built-up static charges.Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode. See Figure A.
18. An outside antenna system should not be
located in the vicinity of overhead power lines or
other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme
care should be taken to keep from touching such
power lines or circuits, as contact with them might
be fatal.
19. Do not overload wall outlets, extension cords,
or integral convenience receptacles, as this can
result in a risk of fire or electric shock.
20. Never push objects of any kind into this
product through openings, as they may touch
dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never
spill liquid of any kind on the product.
21. The apparatus shall not be exposed to dripping
or splashing, and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
22. Do not attempt to service this product yourself,
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
23. When replacement parts are required, be
sure the service technician has used replacement
parts specified by the manufacturer or that have
the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
24. Upon completion of any service or repairs to
this pr ask the service technician to performoduct,
safety checks to determine that the product is in
proper operating condition.
25. The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
Figure A.
Example of Antenna Grounding as per
National Electrical Code ANSI/NFPA 70
IMPORTANT AFETY RECAUTIONSS P
3
PS210 (120V)
INTRODUCTION
Infinity PS210 Powered Subwoofer
The Infinity PS210 powered subwoofer continues Infinity’s longstanding
commitment to accurate sound reproduction. Our proprietary technology
and engineering resources work together to deliver uncompromised
low-frequency performance in any stereo or multichannel home
theater system.
Unpacking the Subwoofer
If you suspect damage from transit, report it immediately to your dealer.
Keep the shipping carton and packing materials for future use.
PLACEMENT
Since the installation of a subwoofer can be somewhat more complicated
than installing full-range speakers, it is essential that you read this
section very carefully prior to connecting the subwoofer to your system.
Should you have questions relating to your installation, it is advisable
to call your dealer or visit www.infinitysystems.com for assistance.
The performance of the subwoofer is directly related to its placement
in the listening room and how you align the subwoofer with its satellite
speakers. Setting the volume of the subwoofer in relationship to the left
and right speakers is also of critical importance because it is essential
that the subwoofer integrate smoothly with the entire system. Setting the
subwoofer’s volume level too high will result in an overpowering, boomy
bass. Setting the volume level too low will negate the benefits of
the subwoofer.
Here are several additional facts on installation that may prove useful.
It is generally believed by most audio authorities that low frequencies
(below 125Hz) are nondirectional and, therefore, placement of a
subwoofer within any listening room is not critical. While in theory it
is true that the larger wavelengths of extremely low frequencies are
basically nondirectional, the fact is that, when installing a subwoofer
within the limited confines of a room, reflections, standing waves and
absorptions generated within the room will strongly influence the
performance of any subwoofer system.As a result, specific location of
the subwoofer becomes important, and we strongly recommend that you
experiment with placement before choosing a final location.
Placement will depend upon your room and the amount and quality of
bass required (for example, whether or not your room permits placement
of the subwoofer near either satellite). Be sure to leave a minimum of
six inches between the wall and the port on the subwoofer.
Figure 1.This example shows the subwoofer positioned behind the
right-channel satellite speaker to re-create the actual location of
bass instruments in an orchestra and/or add impact to movie
soundtracks.

Specyfikacje produktu

Marka: Infinity
Kategoria: subwoofer
Model: Primus PS210

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity Primus PS210, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer Infinity

Infinity

Infinity Alpha 1200S Instrukcja

26 Grudnia 2024
Infinity

Infinity Beta 8 Instrukcja

26 Grudnia 2024
Infinity

Infinity Classia PSW310W Instrukcja

26 Grudnia 2024
Infinity

Infinity Reference 1030w Instrukcja

26 Grudnia 2024
Infinity

Infinity TSS-450 Instrukcja

26 Grudnia 2024
Infinity

Infinity Reference 1020w Instrukcja

26 Grudnia 2024
Infinity

Infinity SW-12 Instrukcja

26 Grudnia 2024
Infinity

Infinity BassLink T Instrukcja

26 Grudnia 2024
Infinity

Infinity Reference 1232w Instrukcja

26 Grudnia 2024
Infinity

Infinity Reference 1220w Instrukcja

26 Grudnia 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

ETON

ETON Graphit 8-2 Instrukcja

19 Marca 2025
ETON

ETON Graphit 8-4 Instrukcja

19 Marca 2025
ETON

ETON Graphit 10-4 Instrukcja

19 Marca 2025
ETON

ETON MW 10 FLAT Instrukcja

19 Marca 2025
ETON

ETON PW 8 Instrukcja

19 Marca 2025
ETON

ETON USB 6 AR Instrukcja

19 Marca 2025
Morel

Morel Ultimo Powerslim 124D Instrukcja

12 Marca 2025
Morel

Morel Ultimo Powerslim 104D Instrukcja

12 Marca 2025
Rockustics

Rockustics OneSub Instrukcja

9 Marca 2025
Phase Technology

Phase Technology PL-10s Instrukcja

5 Marca 2025