Instrukcja obsługi InfaSecure Matilda A35

InfaSecure Niesklasyfikowane Matilda A35

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla InfaSecure Matilda A35 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Matilda
bed guard
INSTRUCTIONS
MODEL# A35
IMPORTANT: Please read instructions carefully.
Keep these instructions for future reference. Read the
entire instruction booklet before assembling and installing
this product. If you sell or give away this product, make
sure you give this instruction booklet to the new owner
P.O. Box 487, Emu Plains NSW 2750
Service No: 02 4728 8090
WARNING
1. For use with children from18 months to 5 years of age. This bed rail is to be used only when the child is able
to climb in and out of bed unaided.
2. This bed rail does not ensure the same level of safety as a child's cot.
3. Only use mattresses with the following measurements: minimum size 90x190cm ,maximum size 155x190cm
and min. thickness 10cm and max. 20cm.
4. Do not use when the height of the bedding is greater than 60cm. Never use on a bunk bed or any other bed
that does not correspond to the instructions.
5. To avoid risk of injury, carefully proceed acording to the instructions when assembling, installing and
using this bed rail.
6. It should be checked periodically that the bed rail is always properly fitted and secure in place, and the
locking mechanisms on the bed rail are securely fixed.
This bed guard complies with BS7972: 2001 + A1: 2009
OPERATING INSTRUCTIONS
ASSEMBLY PARTS
1. Make sure no component
is missing prior to assembly.
TO ASSEMBLE
(A) Left Vertical Side Rail
(B) Right Vertical Side Rail
(C) L-Shaped Top Rail
(D) L-Shaped Top Rail
(E) Right L-Shaped Foot Rail
(F) Left L-Shaped Foot Rail
(G) Straight Bottom Rail
(H) Straight Bottom Rail
(with sleeve)
(I) Fabric/Mesh Panel
(J) Safety Belts & Anchors
6.1
3 4
Lock button
Lock button hole 5
(E) (J)
(F)
(I)
(B)
(C)(D)
(G)(H)
(A)
2. Depress the lock buttons and
connect the Vertical Side Rails (A) &
(B), to L-shaped Top Rails (C) & (D).
3. Slide the mesh panel (I) onto
top rail as shown. Gather the
mesh fabric until the top rail end
is uncovered.
4. Connect the top two rails (C) and
(D) by aligning the two straight ends.
Depress the lock button, move and
turn the two top rails by alligning the
two straight rails into place.
5. Pull and ease the mesh panel to
cover the bed rail smoothly and flatly.
6.1 Insert the L-shaped foot rail (E)
into the fabric sleeve, as shown,
depress the two lock buttons, and
connect with Vertical Right Side Rail
(A). The locking buttons will automat-
ically spring outwards with a ‘click’
when correctly seated into the
receiving socket [6.1].
6.2 Repeat the same operation to
connect the opposite side foot rail (F)
through the mesh sleeve, and into the
Left Vertical Rail (B) [6.2]. Connect-
ing plastic parts need to be in the
same direction.
6.2
To prevent the risk of strangulation it is essential to ensure that when the bedguard is fitted into position, there
is a gap of at least 250mm (10 in.), between each end of the bed and the corresponding end of the bedguard.
The bed rail must be securely against the side of mattress with the fixings all in place.
Once fitted in place, the bedguard should be checked to ensure that it is properly fitted and secure.
Top edge of bed rail must be at least 16cm (6.3 in.) above top edge of mattress.
>16cm(6.3")
Bed rail
Footboard
>25cm(10")
Headboard
Bed rail
>25cm(10")
WARNING
Lock button
Lock button hole
9.1 Insert the joined straight bottom
rails (G/H) into the bottom of the
fabric & mesh panel, and align
the end of (G) with the receiving
plastic socket on L-shaped Foot Rail
(E), then slide into socket and ensure
that the locking button ‘clicks’ securely
into the lock button hole [9.1].
9.2 Align the end of Straight Bottom
Rail (H) with the attachment stem on
the L-shaped Foot Rail (F), and slide
the movable socket flange over the
stem, ensuring that the locking button
is securely seated into position.
TO USE
Net
L shape plate
Mattress width
WARNING
Be sure to keep lock buttons securely in place.
Children should NOT be allowed to play with the bed rail
or use it as a ladder. Discontinue use if any part of the bed rail
becomes damaged or torn.
7
Right side
Mattress
Lock button
is clicked into
Lock button hole
7. Make sure Right Vertical (A) is placed on the right side.
1. Measure the width of the bed mattress,
and adjust the length of both safety straps,
so that the distance between the
fabric/mesh cover and the L-shaped safety
anchors are approximately equal to the
mattress width (see diagram).
9.3 Your Bedguard is now fully
assembled. Please check that all
attachment locking buttons are
securely and correctly seated into
their keepers [9.3].
8. Align and connect the two bottom
rails (G) and (H) by depressing the
lock button and allowing it to ‘click’
into the lock button hole.
9.1 9.2 9.3

Specyfikacje produktu

Marka: InfaSecure
Kategoria: Niesklasyfikowane
Model: Matilda A35

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z InfaSecure Matilda A35, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane InfaSecure

InfaSecure

InfaSecure Velocity Caprice Instrukcja

26 Września 2024
InfaSecure

InfaSecure Momentum Go Instrukcja

26 Września 2024
InfaSecure

InfaSecure Spectre Instrukcja

26 Września 2024
InfaSecure

InfaSecure Momentum Quantum Pro Instrukcja

26 Września 2024
InfaSecure

InfaSecure Momentum More Instrukcja

23 Września 2024
InfaSecure

InfaSecure Matilda A35 Instrukcja

9 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024