Instrukcja obsługi Indesit YT M11 92 X UK

Indesit Suszarka bębnowa YT M11 92 X UK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Indesit YT M11 92 X UK (4 stron) w kategorii Suszarka bębnowa. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

THANK YOU FOR BUYING AN INDESIT PRODUCT.

In order to receive a more complete assistance, please

Quick guide

Before using the appliance carefully read the Safety

Instructions.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dryer is properly ﬁxed,

either to the dryers's water tank or to the domestic sewage

system.

The dryer must be installed in a room with a temperature

ranging between 5°C and 35°C to ensure proper operation.

Before you use your dryer ensure that it has been in a upright

position for at least 6 hours.

DAILY USE

Doing this will keep your machine working at its BEST:

- remember to empty your water tank after each drying cycle.

- remember to clean your lters after each drying cycle.

Refer to the Care & Maintenance section.

1. Plug the dryer into the power supply socket.

2. Open the door and load garments; always refer to instructions on

clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door filter. Do not load items that are

dripping wet. Do not tumble dry large, very bulky items.

3. Close the door.

4. Press the "On/Off" button.

5. Select the most suitable programme

for the type of fabric in that

load.

6. Select the options, if necessary.

7. Press the "

Start/Pause"

button to begin drying.

8. At the end of the drying cycle, a buzzer will beep. An indicator on

the control panel signals the end of the cycle. Pull the load out

immediately to prevent the formation of creases on laundry.

9. Turn the machine off by pressing the "On/Off" button, open the

door and pull the clothing out. If the machine is not switched off

manually, after about a quarter of an hour from the end of the

cycle , the appliance turns off automatically to save energy.

Note that some programme/option accords with "Crease Care"

system. This means that for some hours, after the end of the

drying cycle, the drum rotates at regular intervals to prevent the

formation of creases.

In case of power failure, it is necessary to press the "Start/Pause"

button to restart the cycle.

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the ﬁ rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

PUSH & GO

This function serves to start a cycle, after machine switching on,

without enabling any further button an/or knob (the programme

PUSH & GO will be deactivated instead).

It is always necessary to follow the points 1, 2, and 3 concerning

the daily use.

To start the cycle PUSH & GO, keep the button pressed. The light on

signals that the cycle is started. The cycle is suitable for cotton and

synthetic textiles. Max. load 4 kg. (Cycle duration 120’)

If the door is opened during the cycle, to restart it, close the door and

press the button START/PAUSE. This programme does not allow to set

other options.

OPENING OF THE DOOR DURING THE CYCLE

Laundry can be checked while the drying cycle runs and any

garments already dry can be removed, while drying continues for

the remaining items. After closing the door, press the "Start/Pause"

button to resume machine operation.

Keep the door closed until the cycle end to save time and energy.

CONTROL PANEL

1 ON/OFF button (hold for Reset)

2 Programme selection knob

3 Start/Pause

4 Push & Go

Options buttons*

5 Dryness level

6 Start delay

7 Timed drying

8 Cycle end

9 Light drying (hold for Key Lock)

10 Crease care ( hold for Mute)

*Note: some models may have the wording in full instead of the icons.

INDICATORS

Dryness level: Iron dry - Hanger dry - Cupboard dry -

Extra dry -

Cycle phase: END - Dry - Cool tumble - End of cycle

Empty water tank - Clean door lter - Clean bottom lter

Refer to Troubleshooting section: Failure call After-sales Service -

DEMO

Demo mode

5 6 7

DEMO

3’’

OPTIONS

These buttons allow you to personalise the selected programme

according to personal requirements.

Not all options are available for all programmes. Some options

may be incompatible with ones you have previously set; if so,

you will be alerted by the buzzer and/or blinking indicators.

If the option is available, the option indicator will stay on. The

programme may retain some options selected in previous drying

cycles.

Dryness level

Press the related button several times to obtain a diﬀerent

level of residual moisture on garments. An indicator signals the

level being selected.

Iron Dry: very delicate drying. Items will be more easily

ironed immediately after the cycle.

Hanger dry: a level intended for delicate garments ready to

be hanged.

Cupboard dry: the garments are ready to be folded and put

away.

Extra dry: used for garments to be worn at the end of the

cycle.

Timed drying

This option is to manually set the drying time. Press the

corresponding button to set the required time for drying. An

indicator on the control panel signals the time being selected.

Start delay

This option is for delaying the start of the cycle. Press the

corresponding button several times to ﬁnd the required delay.

Once the max time is reached, the option is reset by pressing

the button again. An indicator on the control panel signals the

time being selected. After pressing the "Start/Pause" button, the

machine signals the time remaining to the start of the cycle. If the

door is opened, press the "Start/Pause" button once the door has

been closed.

Mute

This option turns oﬀ all sounds of control panel. Only

warnings remain active.

• to activate the option, keep the button pressed until the

indicator goes on.

• to disable the option, keep the button pressed until the indicator

goes oﬀ.

Cycle end

This option activates a prolonged buzzer at the end of the

cycle. Enable it if you are not sure to hear the normal sound at the

end of the cycle. This option remains in memory if selected in the

previous drying.

Key lock

This option makes all machine controls inaccesible, except

the button On/Oﬀ. When the machine is on:

• to activate the option, keep the button pressed until the

indicator goes on.

• to disable the option, keep the button pressed until the indicator

goes oﬀ.

This option remains in memory if selected in the previous drying.

Crease care

This option add a crease treatment at the end of the cycle by

means of a periodic rotation of the drum (duration up to 10 hours).

It is particularly suitable when it is not possible to remove the

laundry as soon as the drying ends. If this option is used together

with the Start Delay, the crease treatment is added also in the

Start Delay phase. This option remains in memory if selected in

the previous drying.

Light dry

Enables a more gentle treatment of the laundry by reducing

the drying temperature.

*MAX LOAD 9 Kg (Dry load)

PROGRAMMES

The duration of these programs will depend on the size of the

load, types of textiles, the spin speed used in your washer and

any extra options selected. In machines equipped with display,

the duration of the cycles is shown on the control panel. The

remaining time is constantly checked and adjusted during the

drying cycle to show the best possible estimate.

Option to use - If all your loads on Automatic Cycles are

consistently less dry or more dry than you would like, you may

increase or decrease the dryness level using the speciﬁc option.

Eco kg Max*

This is the most eﬃcient programme in terms of energy

consumption and is suitable for drying normal wet

cotton laundry. The values on the Energy Label are based on this

programme.

NOTE: For optimal energy eﬃciency this cycle by default is set up to

"Cupboard Dry" level. For a higher dryness level we suggest using

the Cotton cycle.

Cotton kg Max*

Cycle suitable for drying all types of cotton, ready to be

placed in the cupboard.

Mixed kg 4

This programme is ideal for drying cotton and synthetic

fabrics together.

Synthetics kg 4

For drying laundry made of synthetic ﬁbres.

Mini synthetics kg 2

Eco-drying of small laundry loads.

Delicates kg 2

For drying delicate laundry requiring a gentle treatment.

Wool kg 1

Programme for drying wool clothing. It is advisable to turn

the garments inside out before drying. Leave to dry naturally the

heaviest edges that are still damp.

Refresh

A short programme suitable for refreshing ﬁbres and

garments by means of fresh air. Do not use with garments

that are still wet. It can be used on with any load size but is

more eﬀective with small loads. The cycle duration is about 20

minutes.

Jeans kg 3

For drying cotton jeans-wear and garments made of robust

cotton, like denim, such as trousers and jackets.

Shirts kg 3

This is a programme for Shirts made from cotton or cotton

blend/synthetics.

Duvet

Programme intended to dry bulky garments, as single duvet.

Baby kg 2

A programme intended to dry garments and linen of

new-born babies (cotton and chenille), as well as delicate

garments. Do not dry garments having plastic covering.

Sport kg 4

For drying sports garments made of synthetics or cotton

blends.

Smart iron

This cycle relaxes ﬁbres, thus making ironing and folding

easier. Suitable for small load of damp or dry cotton and cotton

blend fabrics. Not for wet items.

45’

Xpress 45' kg 1

This is a quick timed programme, ideal for drying garments

spun at high speed in the washing machine, e.g. the shirts used

in a working week.

Quick guide

Power consumption

oﬀ-mode (Po) - Watts 0.42

left-on mode (Pl) - Watts 2.00

Programmes MinutesKg kWh

Eco* 9 2.13 211

Eco 4.5 1.19 131

Synthetics 4 0.73 95

* This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most eﬃcient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting conﬁguration).

Cleaning the tumble dryer

• The external metal, plastic and rubber parts can be cleaned

with a damp cloth.

• Clean the front air intake grille regularly (every 6 months) with

a vacuum cleaner to remove any lint, ﬂuﬀ or dust deposits.

Furthermore, remove any lint deposits from the ﬁlters area,

using a vacuum cleaner every so often.

• Do not use solvents or abrasives.

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Remove the water from the water tank completely.

3. Make sure that door and water tank are properly closed.

4. If the drain hose is connected to your drainage system,

re-connect it to the back of the dryer (see "Installation" section

in the Safety Instruction guide).

A B

CARE AND MAINTENANCE

WARNING: unplug the dryer during the cleaning and

maintenance procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and empty it into a sink or other

suitable drain, then place it back properly. Do not use the dryer

without having inserted the container back in place.

Cleaning the door lter after each cycle (see Fig. B).

Pull the ﬁlter out and clean it by removing the lint from the ﬁlter

surface under running water or using a vacuum cleaner. For

optimal performance, dry up all the ﬁlters before inserting them

back in place. Do not use the dryer without having reinserted

the lter in place.

Remove the door ﬁlter as described below:

1. Open the door and pull upwards.

2. Open the ﬁlter and remove lint from all its parts. Replace it

correctly. Ensure it is completely inserted ﬂush with the dryer seal.

Cleaning the bottom lter when the relevant indicator

turns on (see Fig. C).

Pull the ﬁlter out and remove the lint from its surface by washing

it under runing water or by using a vacuum cleaner. However, it

is advisable to clean this ﬁlter after each cycle to optimise drying

performance. Do not use the dryer without having inserted

the lter in place rst.

Remove the bottom ﬁlter as described below:

1. Open the lower door.

2. Take the handle and pull the lower ﬁlter out.

3. Open the rear side of the ﬁlter and remove the lint from the

inner surface of the mesh.

4. Clean the bottom ﬁlter chamber avoiding the direct contact

with the ﬁns.

5. Close the rear side of the lower ﬁlter and place it back by

checking it is perfectly integrated in place.

6. Lower the ﬁlter handle and close the bottom door.

7. Make sure the air intake is free.

The lters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

of clogged lters, the air ow inside the dryer would be

seriously aected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

Heat Pump System

The heat pump contains ﬂuorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.18 kg of the R134a gas. GWP = 604 (1 t CO).

PRODUCT DESCRIPTION

1. Water Tank

2. Air Intake

3. Bottom ﬁlter

4. Door ﬁlter

Specyfikacje produktu

Marka:	Indesit
Kategoria:	Suszarka bębnowa
Model:	YT M11 92 X UK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Indesit YT M11 92 X UK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Suszarka bębnowa Indesit

Indesit YT M11 92B X Instrukcja

7 Stycznia 2025

Indesit YT M11 82SS X Instrukcja

7 Stycznia 2025

Indesit C YD A81 WWGL UK Instrukcja

7 Stycznia 2025

Indesit YT M11 82B X UK Instrukcja

2 Stycznia 2025

Indesit BI WDIL 861485 UK Instrukcja

30 Grudnia 2025

Indesit IDV 75 B K (UK) Instrukcja

14 Października 2024

Indesit YT M11 82 X UK Instrukcja

14 Października 2024

Indesit Ecotime IWDC 65125 S UK Instrukcja

9 Października 2024

Indesit BI WDIL 75148 UK Instrukcja

8 Października 2024

Indesit BDE 86436 WV UK Instrukcja

8 Października 2024

Instrukcje Suszarka bębnowa

Najnowsze instrukcje dla Suszarka bębnowa

Bauknecht trkk 7846 Instrukcja

15 Stycznia 2025

AEG T8DEN86CS Instrukcja

15 Stycznia 2025

Candy GCS 91013A2 Instrukcja

15 Stycznia 2025

Zanussi ZDP7204PZ Instrukcja

15 Stycznia 2025

Bauknecht TRKA Koblenz 4590 Instrukcja

15 Stycznia 2025

Bauknecht trkk 6840 Instrukcja

15 Stycznia 2025

AEG-Electrolux Lavatherm 310 Instrukcja

14 Stycznia 2025

Hotpoint NWXR483GGWW Instrukcja

14 Stycznia 2025

Zanussi ZDC82B4SW Instrukcja

14 Stycznia 2025

Bauknecht trk advance Instrukcja

14 Stycznia 2025