Instrukcja obsługi Indesit WIE 147 (UK) (CO)

Indesit pralka WIE 147 (UK) (CO)

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Indesit WIE 147 (UK) (CO) (16 stron) w kategorii pralka. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

English, 1

Contents

Installation, 2-3-4-5

Unpacking and levelling, 2

Electric and water connections, 2-3

The first wash cycle, 4

Technical details, 5

Washing machine description, 6-7

Control panel, 6

Display, 7

MEMO Programme, 7

Starting and Programmes, 8

Briefly: how to start a programme, 8

Programme table, 8

Personalisations, 9

Setting the spin cycle, 9

Setting the Delay Timer, 9

Setting the temperature, 9

Functions, 9

Detergents and laundry, 10

Detergent dispenser, 10

Bleach cycle, 10

Preparing your laundry, 10

Special items, 10

Woolmark, 10

Precautions and advice, 11

General safety, 11

Disposal, 11

Saving energy and respecting the environment, 11

Care and maintenance, 12

Cutting off the water or electricity supply, 12

Cleaning your appliance, 12

Cleaning the detergent dispenser, 12

Caring for your appliance door and drum, 12

Cleaning the pump, 12

Checking the water inlet hose, 12

Troubleshooting, 13

Service and Guarantee, 14-15-16

Before calling for Assistance, 14

Guarantee, 15-16

WASHING MACHINE

WIE 147

Instructions for use

Installation

 Keep this instruction manual in a safe place for

future reference. Should the appliance be sold,

transferred or moved, make sure the instruction

manual accompanies the washing machine to inform

the new owner as to its operation and features.

Read these instructions carefully: they contain vital

information on installation, use and safety.

Unpacking and levelling

Unpacking

1. Unpack the washing machine.

2. Check whether the washing machine has been

damaged during transport. If this is the case, do not

install it and contact your retailer.

3. Remove the 4

protective screws and

the rubber bush with the

respective spacer,

situated on the rear of

the appliance (see also

the installation leaflet).

NB:The plastic spacers

may fall down inside the

machine once the bolt

has been removed, and will not interfere with the

operation of the machine.

4. Seal the gaps using the plastic plugs provided.

5. Keep all the parts: you will need them again if the

washing machine needs to be moved to another

location.

Packaging materials are not children's toys.

Levelling

Your machine may make a considerable amount of noise

if the two front feet have not been adjusted correctly.

1. Install the washing machine on a flat sturdy floor,

without resting it up against walls, furniture cabinets

or other.

2. If the floor is not

perfectly level, compen-

sate for any unevenness

by tightening or

loosening the adjustable

front feet (see figure);

the angle of inclination,

measured according to

the worktop, must not

exceed 2°.

Levelling your appliance correctly will provide it with

stability and avoid any vibrations, noise and shifting

during operation. If it is placed on a fitted or loose

carpet, adjust the feet in such a way as to allow

enough room for ventilation beneath the washing

machine.

Electric and water connections

Connecting the water inlet hose

1. Insert seal A into the

end of the inlet hose

and screw the latter

onto a cold water tap

with a 3/4 gas threaded

mouth (see figure).

Before making the

connection, allow the

water to run freely until

it is perfectly clear.

2. Connect the other end

of the water inlet hose to

the washing machine,

screwing i t onto t he

appliance's cold water

inlet, situated on the top

right-hand side on the

rear of t he appl iance

(see figure).

3. Make sure there are no kinks or bends in the hose.

 The water pressure at the tap must be within the

values indicated in the Technical details table

(on the next page).

 If the water inlet hose is not long enough, contact

a specialist store or an authorised serviceman.

 Ensure that the supply taps are allowing water

through. Old taps may seize in the closed position

and thus prevent water reaching the machine.

ServiceTroubleshooting

Precautions

Care

Programmes

Detergentsation Description

Connecting the drain hose

Connect the drain hose,

without bending it, to a

draining duct or a wall

drain situated between

65 and 100 cm from

the floor;

The drain hose may be

connected to an

under-sink trap. Before

connecting the drain

hose from the machine

ensure that any blanks

or removable ends

have been taken off

the spigot.

If it is place over the

edge of a basin or sink

be sure the free end of

the hose should not be

underwater.

 We advise against the use of hose extensions; in

case of absolute need, the extension must have the

same diameter as the original hose and must not

exceed 150 cm in length.

Ensure that if the drain hose is pushed into a

standpipe, that the end does not go down more

than 15cms (6 inches). If the hose is pushed down

too far, this may cause the machine to self -syphon

ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains

socket, make sure that:

 the socket is earthed and in compliance with the

applicable law;

 the socket is able to sustain the appliance's

maximum power load indicated in the Technical

details table (see page 5);

 the supply voltage is included within the values i

ndicated on the Technical details table

(see page 5);

 the socket is compatible with the washing

machine's plug. If this is not the case, replace

the socket or the plug.

Your appliance is now supplied with a 13 amp fused

plug it can be plugged into a 13 amp socket for

immediate use. Before using the appliance please

read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED.

THE FOLLOWING OPERATIONS SHOULD BE

CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA

approved fuse to BS 1362 should always be used,

and the fuse cover re-fitted. If the fuse cover is lost,

the plug must not be used until a replacement is

obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking

or the colour that is embossed in words on the base

of the plug. Replacements can be obtained directly

from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug

and you should wish to re-route the mains cable

through partitions, units etc., please ensure that

either:

the plug is replaced by a fused 13 ampere re-

wearable plug bearing the BSI mark of approval.

or:

the mains cable is wired directly into a 13 amp cable

outlet, controlled by a switch, (in compliance with BS

5733) which is accessible without moving the

appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you

make the pins unusable so that it cannot be

accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug:

Important: the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow Earth

Blue Neutral

Brown Live

65 - 100 cm

Where it connects

to the waste water

pipe cut end off

spigot or remove the

blanking cap

GREEN &

YELLOW

BROWN

BLUE

13 ampere fuse

CROSS-BAR

CORD GRIP

As the colours of the wires in the lead may not

correspond with the coloured markings identifyng

the terminals in your plug, proceed as follows:

Connect Green & Yellow wire to terminal marked E

or or coloured Green or Green & Yellow.

Connect Brown wire to terminal marked L or

coloured Red.

Connect Blue wire to terminal marked N or coloured

Black.

If a 13 amp plug (BS 1363) is used it must be fitted

with a

13 amp fuse, either in the plug or adaptor or at the

distribution board.

If you are in any doubt the electrical supply to your

machine, consult a qualified electrician before use.

How to connect an alternative plug:

The wires in this mains lead are coloured in

accordance with the following code:

BLUE NEUTRAL (N)

BROWN LIVE (L)

GREEN & YELLOW EARTH (E)

Disposing of the appliance:

When disposing of the appliance please remove the

plug by cutting the mains cable as close as possible

to the plug body and dispose of it as described

above.

 The washing machine should not be installed in an

outdoor environment, not even when the area is

sheltered, because it may be very dangerous to

leave it exposed to rain and thunderstorms.

 When the washing machine is installed, the mains

socket must be within easy reach.

 Do not use extensions or multiple sockets.

 The power supply cable must never be bent or

dangerously compressed.

 The power supply cable must only be replaced by

an authorised serviceman.

Warning! The company denies all liability if and when

these norms are not respected.

The first wash cycle

Once the appliance has been installed, and before

you use it for the first time, run a wash cycle with

detergent and no laundry, setting the 90°C

programme without a pre-wash cycle.

Technical details

Model WIE 147

Dimensions

59.5 cm wide

85 cm high

53.5 cm deep

Capacity from 1 to 5 kg

Electric

connections

please refer to the technical data plate

fixed to the machine

Water

connections

maximum pressure 1 MPa (10 bar)

minimum pressure 0.05 MPa (0.5 bar)

drum capacity 46 litres

Spin speed up to 1400 rpm

Control

programmes

according to EN

60456 directive

programme 2; temperature 60°C;

run with a load of 5 kg.

This appliance is compliant with the

following European Community

Directives:

- 73/23/CEE of 19/02/73 (Low

Voltage) and subsequent amendments

- 89/336/CEE of 03/05/89

(Electromagnetic Compatibility) and

subsequent amendments

- 2002/96/CE

ServiceTroubleshooting

Precautions

Care

Programmes

DetergentsDescriptionation

Display

In addition to being a practical tool to programme your appliance (see page 9), the display provides useful

information concerning the wash cycle.

Once you have pressed the START/RESET button to

start the programme, the display will indicate the

amount of time left until the end of the wash cycle. If

a delayed start has been set (using the Delay Timer,

see page 9), the delay time will be indicated on the

display.

ServiceTroubleshooting

Precautions

Care

Programmes

Detergentsation Description

Door lock:

If the symbol is on, the washing machine door is locked to prevent it from being opened accidentally. To avoid

any damages, wait for the symbol to switch itself off before you open the appliance door.

At the end of the programme, the word END is displayed.

 In the event of an anomaly, an error code will appear, such as: F-01, which should be communicated to the

Service Centre (see page 13).

"MEMO" Programme

This programme allows you to store your favourite or most-used wash cycle.

All you have to do is set the desired programme and, once it has started, turn the KNOB to position ; the

wash cycle will be stored automatically and the word MEMO appears on the display, flashing for a few seconds.

Subsequently, you can start the "MEMO" cycle by simply turning the KNOB to position ; you will be able to

see the temperature/spin cycle/delay timer values by pressing the corresponding buttons; you will also be able to

modify them but this variation will only be valid for the programme in progress and it will not be stored in the

"MEMO" cycle.

If you want to store a new wash cycle, repeat the above-mentioned operations.

Typ e o f fab r ic and

d e gr e e of soil Pr ogr. Te m p e -

rat ure

D e ter ge n t Fabric

softener

Stain rem oval

op tion/b leach

C ycle

length

(minutes)

Ma x.

Spin

Sp ee d s

(r.p.m.)

De sc r iption of wash cyc le

pre-

w as h w as h

St an dar d

Cotton: Extremely soiled whites

(sheets, tablecloths, etc.) 1 90°C    135 Max. Pre-wash, wash cycle, rinse cycles,

intermediate and final spin cycles

Cotton: Extremely soiled whites

(sheets, tablecloths, etc.) 2 90°C   Delicate/

Trad itio n al 125 Max. Wash cycle, rinse cycles,

intermediate and final spin cycles

Cotton: Heavily soiled wh ites

and fast colours 2 60 °C   Delica t e/

Trad itio n al 110 Max. Wash cycle, rinse cycles,

intermediate and final spin cycles

Cotton: Heavily soiled wh ites

and delicate colours 2 40°C   Delicate/

Trad itio n al 105 Max. Wash cycle, rinse cycles,

intermediate and final spin cycles

Cotton: Sligh tly so iled w h ites

and de lica te colo urs (sh irt s,

ju mp ers, etc.)

3 40°C   Delicate/

Trad itio n al 70 Max. Wash cycle, rinse cycles,

intermediate and final spin cycles

Synthe tics: Heavily so iled

fa st co lo u rs (bab y lin e n, etc .) 450°C   De licate 72 800 Wash cycle, rin se cycles, anti-

crease or delicate spin cycle

Synthe tics: Heavily so iled

fa st co lo u rs (bab y lin e n, etc .) 4 40°C   D e lic at e 60 800 Wash cycle, rin se cycles, an ti-

crease or delicate spin cycle

W o o l 5 40 °C   De lic at e 50 600 W as h cyc le, rin se cycles an d

delicate spin cycle

Very delicate fabrics

(cu rtains, silk, visco se, etc.) 6 30 °C   45 no Wash cycle , rin se cycles, anti-

crease or draining cycle

Tim e 4 y ou

Cotton: Heavily so iled w hites

and fast c o lo u rs 7 60°C   60 Max. Wash cycle, rinse cycles,

intermediate and final spin cycles

Cotton: Sligh tly so iled w h ites

and de lica te colo urs (sh irt s,

ju mp ers, etc.)

8 40°C   50 Max. Wash cycle, rinse cycles,

intermediate and final spin cycles

Synthetics:

Delicate colours (all

types of slightly soiled garments) 940°C   40 800 Wash cycle, rinse cycles,

delicate spin cycle

Synthetics:

Delicate colours (all

types of slightly soiled garments) 10 30 °C   30 800 W ash cyc le, rin se cycles an d

delicate spin cycle

Sp o rt

Sports sh oes (MAX. 2 pairs) 11 30°C   5 0 800

Co ld wash (withou t detergen ts),

wash cycle, rinse cycles, and

delicate spin cycle

Fabrics for sportswear

(Tracksu its, sh orts, etc.) 12 3 0 °C   60 600 Wash cycle, rinse cycles,

intermediate and final spin cycles

M EM O Allo w s fo r an y wash cycle t o be stored (see pag . 7 )

PAR T IAL PROG R A M M ES

R in se  Delicate/

Trad itio n al 800 R in s e cycles an d spin cycle

Spin 800 Draining and spin cycle

Drain no Drain in g

Starting and Programmes

Programme table

Notes

-For programmes 7 and 8, we advise against exceeding a wash load of 3.5 kg.

-For programme 12 we advise against exceeding a wash load of 2 kg.

-For the anti-crease function: see Easy iron, opposite page. The information contained in the table is purely indicative.

Special programme

Daily (programme 10 for Synthetics) is designed to wash lightly soiled garments in a short amount of time: it only lasts

30 minutes and allows you to save on both time and energy. By setting this programme (10 at 30°C), you can wash

different fabrics together (except for woollen and silk items), with a maximum load of 3 kg.

We recommend the use of liquid detergent.

Briefly: starting a programme

1. Turn the washing machine on by pressing button .

2. Load your laundry into the washing machine and

shut the appliance door.

3. Set the knob to the desired programme. The

estimated duration of the selected programme is

displayed. The temperature and spin speed are

automatically set according to the programme

(to change them, see page 9).

4. Select any functions (see page 9).

5. Add the detergent and any fabric softener

(see page 10).

6. Start the programme by pressing the START/RESET

button for one second.

To cancel it, keep the START/RESET button

pressed for at least 2 seconds.

7. When the programme has ended, the word END is

displayed. Take out your laundry and leave the

appliance door ajar to allow the drum to dry

thoroughly.

8. Turn the washing machine off by pressing button .

Function Effect Comments Enabled with

programmes:

SSt

tta

aai

iin

rre

eem

mmo

oova

vaval

Bleachin g cycle

designed to

remove the

toughest stains.

Please remember to pour the bleach into extra compartment 4

(see page 10) .

This function is incompatible with the EASY IRON function.

2, 3, 4, 5,

Rinse cycle.

ExExt

ttr

rr R

RRi

iin

nn s

sse

a a

In creases th e

efficiency of th e

rinse.

Recommended when th e applian ce h as a full load or with large

quantities of detergent.

1, 2, 3, 4, 7,

8, 9, 11, 12,

Rinse cycle.

EaEas

ss i

iir

rro

oon

y y

This option

redu ces the

amoun t of

creasing on

fabrics, makin g

them easier to

iron.

When this function is set, programmes 4 and 6 will end, with the

laundry left to s oak (An ti-crease), and the relative button flashes :

- to con clude the cycle, press the START/RESET button or the

EASY IRON button;

- to run the draining cycle alone, set the knob to the relative

symbol and press the START/RESET button.

This function is incompatible with the STAIN REMOVAL function.

3, 4, 6, 7, 8, 9,

Rinse cycle.

ServiceTroubleshooting

Precautions

Care

Programmes

Detergentsation Description

Personalisations

Setting the spin cycle

If, when the appliance is switched on, the KNOB is positioned on

a programme with a spin cycle, a fixed appears. Press button

and the maximum spin speed allowed for the programme set

will be displayed, and the icon flashes. Press it again and the

values lower until they reach OFF, which indicates that the spin

cycle has been excluded (press it again to go back to the

maximum value); stop on the desired speed, after approximately

2 seconds the setting is accepted: the symbol remains fixed.

The spin cycle setting is enabled with all the programmes except

for 6 and the Draining cycle.

Setting the Delay Timer

Press the button and you will see the word OFF on the

display, while the relative symbol flashes.

Press the button again and "1h" appears, that is, a delay of one

hour (this can reach up to 24h); stop on the "desired" delay; after

approximately 2 seconds the setting is accepted, following which,

the time for the set programme appears on the display and the

symbol remains on.

If you now press the START/RESET button, the set "delay"

appears; this decreases every hour until the start of the cycle. In this phase, the "delay" can only be modified by

decreasing it. The Delay Timer regulation is enabled with all programmes.

Setting the temperature

If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature needs

to be regulated, a fixed appears. Press button and the maximum temperature allowed for the programme set

will be displayed and the icon flashes. Press it again and the temperature lowers until it reaches OFF, which

indicates a cold wash cycle (press it again to go back to the maximum value); stop on the desired value, after

approximately 2 seconds the setting is accepted: the symbol remains fixed.

The temperature adjustment is enabled with all wash programmes.

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the

programme set. If you set a function that is incompatible with another function you selected previously, only the

last one selected will be enabled.

FUNCTION buttons

 The machine has an intelligent built in check for out of balance loads. To let protect your machine it may reduce the final spin

speed if an unbalanced load is detected.

The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.

Detergent dispenser

Good washing results also depend on the correct

dose of detergent: adding too much detergent won't

necessarily make for a more efficient wash, and may

in fact cause build up on the interior of your

appliance and even pollute the environment.

Open up the detergent

dispenser and pour in

the detergent and fabric

softener, as follows.

compartment 1: Detergent for pre-wash

(powder)

Before pouring in the detergent, make sure that

extra compartment 4 has been removed.

compartment 2: Detergent for the wash cycle

(powder or liquid)

Liquid detergent should only be poured in

immediately prior to the wash cycle start.

compartment 3: Additives (fabric softeners, etc.)

The fabric softener should not overflow from the grid.

extra compartment 4: Bleach

 Do not use hand wash detergent because it may

form too much foam.

Bleach cycle

 Traditional bleach should be used on sturdy

white fabrics, and delicate bleach for coloured

fabrics, synthetics and for wool.

Place extra

compartment 4,

provided, into

compartment 1.

When pouring in the

bleach, be careful not to

exceed the "max" level

indicated on the central

pivot (see figure).

To run the bleach cycle alone, pour the bleach into extra

compartment 4, set the Rinse programme and

enable the Stain removal function (see page 9).

To bleach during a wash cycle, pour in the detergent

and fabric softener, set the desired programme and

enable the Stain removal function (see page 9).

The use of extra compartment 4 excludes the

possibility of using the pre-wash cycle.

Preparing your laundry

 Divide your laundry according to:

- the type of fabric/the symbol on the label.

- the colours: separate coloured garments from

whites.

 Empty all pockets and check for loose buttons.

 Do not exceed the weight limits stated below,

which refer to the weight when dry:

Sturdy fabrics: max 5 kg

Synthetic fabrics: max 2.5 kg

Delicate fabrics: max 2 kg

Wool: max 1 kg

How much does your laundry weigh?

1 sheet 400-500 g

1 pillow case 150-200 g

1 tablecloth 400-500 g

1 bathrobe 900-1,200 g

1 towel 150-250 g

Special items

Curtains: fold curtains and place them in a pillow

case or mesh bag. Wash them separately without

exceeding half the appliance load. Use programme 6

which excludes the spin cycle automatically.

Quilted coats and windbreakers: if they are

padded with goose or duck down, they can be

machine-washed. Turn the garments inside out and

load a maximum of 2-3 kg, repeating the rinse cycle

once or twice and using the delicate spin cycle.

Wool: for best results, use a specific detergent,

taking care not to exceed a load of 1 kg.

Woolmark

As gentle as a hand wash.

Indesit sets a new standard of superior

performance that has been endorsed by The

Woolmark Company with the prestigious Woolmark

brand. Look for the Woolmark logo on the washing

machine to ensure you can safely and effectively

wash wool garments labelled as "hand wash"

(M.00221):

Set programme 5 for all "Hand wash" garments

(max 1 kg), using the appropriate detergent.

Detergents and laundry

Specyfikacje produktu

Marka:	Indesit
Kategoria:	pralka
Model:	WIE 147 (UK) (CO)

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Indesit WIE 147 (UK) (CO), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Indesit

Indesit OMTWSE 61293 WK Instrukcja

10 Lutego 2025

Indesit OMTWSC 51052 W Instrukcja

10 Lutego 2025

Indesit W 144 XS Instrukcja

15 Stycznia 2025

Indesit WN860WSK Instrukcja

15 Stycznia 2025

Indesit lna 1000 Instrukcja

15 Stycznia 2025

Indesit wia 600 Instrukcja

15 Stycznia 2025

Indesit wite 127 Instrukcja

14 Stycznia 2025

Indesit IM 712B MY TIME UA Instrukcja

14 Stycznia 2025

Indesit IM 602B MY TIME UA Instrukcja

14 Stycznia 2025

Indesit XWD 61452 Instrukcja

13 Stycznia 2025

Instrukcje pralka

Najnowsze instrukcje dla pralka

Whirlpool WPM 911W ADS SPT Instrukcja

25 Marca 2025

Whirlpool FFWDD 107448 BSV EE Instrukcja

24 Marca 2025

Bauknecht B6R 08 SILENCE DE Instrukcja

22 Marca 2025

Vedette LFV404QW Instrukcja

18 Marca 2025

Toshiba AW-T08DUH1800MMMG Instrukcja

18 Marca 2025

Toshiba DW-15F5SS-NZ Instrukcja

18 Marca 2025

Beko B3WF T 5124111 W Instrukcja

14 Marca 2025

Privileg 42N Slimline (026.882) Instrukcja

13 Marca 2025

Bosch WGH244M40 Instrukcja

13 Marca 2025

Insignia NS-WMT41WA5 Instrukcja

12 Marca 2025