Instrukcja obsługi Indesit Slimline DF9E 1B10

Indesit zmywarka Slimline DF9E 1B10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Indesit Slimline DF9E 1B10 (36 stron) w kategorii zmywarka. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/36
EN
1
APPLIANCE
1. Upper rack
2. Foldable aps
3. Upper rack height adjuster
4. Upper spray arm
5. Lower rack
6. Cutlery basket
7. Lower spray arm
8. Filter Assembly
9. Salt reservoir
10. Detergent and Rinse Aid dispensers
11. Rating plate
12. Control panel
0000 000 00000
Service:
1
2
3
4
5
6
7
9
8
1011
12
1
32
1. On-O/Reset button with indicator light
2. Program selection knob
3. Start/Pause button with indicator light / Drain out
DAILY REFERENCE
GUIDE
CONTROL PANEL
PRODUCT DESCRIPTION
PLEASE SCAN THE QR CODE
ON YOUR APPLIANCE IN ORDER
TO HAVE MORE DETAILED
INFORMATION
THANK YOU FOR BUYING AN PRODUCT. INDESIT
In order to receive amore complete assistance, please
register your appliance on: www.indesit.com/register
Before using the appliance carefully read Safety Instructions
guide.
2
FIRST TIME USE
SALT, RINSE AID AND DETERGENT
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the retaining
elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and
on the machine’s functional components.
It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.
It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher (see
PRODUCT DESCRIPTION) and must be lled when the green oat on the
cap of the salt reservoir is no longer visible.
1. Remove the lower rack and unscrew the
reservoir cap (anticlockwise).
2. Only the rst time you do this: ll the salt
reservoir with water.
3. Position the funnel (see gure) and ll the salt
reservoir right up to its edge (approximately
1 kg); it is not unusual for alittle water to leak
out.
4. Remove the funnel and wipe any salt residue
away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get
into the container during the wash program (this could damage the
water softener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
SETTING THE WATER HARDNESS
To allow the water softener to work in aperfect way, it is essential that
the water hardness setting is based on the actual water hardness in
your house. This information can be obtained from your local water
supplier.
The factory sets the default value for the water hardness:
Switch on the appliance by pressing the button.ON/OFF
Switch o the appliance by pressing the button.ON/OFF
Hold down button START/Pause for 5 seconds.
Switch on the appliance by pressing the button.ON/OFF
The ON/OFF LED light will ash as many times as the level that was set.
Set the desired water hardness level using the PROGRAM SELECTION
knob (see WATER HARDNESS TABLE).
Switch o the appliance by pressing the button.ON/OFF
Setting is complete!
As soon as this procedure is complete, run aprogram without loading.
Only use salt that has been specically designed for dishwashers.
If the salt container is not lled, the water softener and the heating
element may be damaged as aresult of limescale accumulation.
Using of Salt is recommended with any type of dishwasher deter-
gent.
Water Hardness Table
Level °dH
German degrees
°fH
French degrees
°Clark
English degrees
1 Soft 0 - 6 0 - 10 0 - 7
2 Medium 7 - 11 11 - 20 8 - 14
3 Average 12 - 16 21 - 29 15 - 20
4 Hard 17 - 34 30 - 60 21 - 42
5 Very hard 35 - 50 61 - 90 43 - 62
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser Ashould
be lled when when the dark optical indicator on the dispenser door C
becomes transparent.
1. Open the dispenser by pressing and pulling up the tab on the lid.B
2. Pour in the rinse aid (max.110 ml), making sure it does not overow
from the dispenser. If this happens, clean the spill immediately with
adry cloth.
3. Press the lid down until you hear aclick to close it.
NEVER pour the rinse aid directly into the appliance tub.
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satised with the drying results, you can ad-
just the quantity of rinse aid used.
Switch the dishwasher on using the button.ON/OFF
Switch it o using the button.ON/OFF
Press button START/Pause three times.
Switch it on using the button.ON/OFF
The START LED light will ash as many times as the level that was set.
Set the level of rinse aid quantity to be supplied using the PROGRAM
SELECTION knob (see PROGRAMS TABLE).
Switch it o using the buttonON/OFF
Setting is complete!
If the rinse aid level is set to 1 (ECO), no rinse aid will be supplied.
Amaximum of 5 levels can be set according to the dishwasher model.
The factory setting is specic to the model, please follow instruction
above to check this for your machine
If you see bluish streaks on the dishes, set alow number (2-3).
If there are drops of water or limescale marks on the dishes, set amid-
range number (4-5).
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device D.
Introduce the detergent into the dry dispenser Eonly. Place the
amount of detergent for pre-washing directly inside the tub.
1. When measuring out the detergent
refer to the mentioned earlier infor-
mation to add the proper quantity.
Inside the dispenser there are indiE-
cations to help the detergent dosing.
2. Remove detergent residues from
the edges of the dispenser and
close the cover until it clicks.
3. -Close the lid of the detergent dis
penser by pulling it up until the
closing device is secured in place.
The detergent dispenser automatically opens up at the right time
according to the program.
Usage of detergent not designed for dishwashers may cause mal-
function or damage to the appliance.
A
B
C
D
E
EN
3
PROGRAMS TABLE
PROGRAMS DESCRIPTION
Instructions on wash cycle selection.
1 ECO
Eco programme is suitable to clean normally soiled tableware, that for
this use, it is the most ecient programme in terms of its combined en-
ergy and water consumption, and that it is used to assess compliance
with the EU Ecodesign legislation.
2 INTENSIVE
Program recommended for heavily soiled crockery, especially suitable
for pans and saucepans (not to be used for delicate items).
3 MIXED
Mixed soil. For normally soiled dishes with dried food residues.
4 RAPID 40
Program to be used for half load of lightly-soiled dishes with no dried
food residues Does not have drying phase.
5 HALF LOAD
Ideal for washing ahalf load of lightly or normally soiled crockery.
6 SOAK
Use to refresh crockery planned to be washed later. No detergent to be
used with this program.
Notes:
Please note that cycle is dedicated for lightly soiled dishes.Rapid 40
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories:
For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.usly.
*) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
sensor calibration. The sensor calibration can increase program duration up to 20 min.
Program
Drying
phase
Duration of wash
program
(h:min)*)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
1 Eco 50° 4:00 11.5 0.78
2 Intensive 65° 2:30 15.0 1.50
3 Mixed 55° 2:25 15.0 1.35
4 Rapid 40’ 45° -0:40 8.0 0.90
5 Half Load 50° 1:15 11.0 0.90
6 Soak - - 0:10 4.0 0.01
OPTIONS AND FUNCTIONS
DRAIN OUT
To stop and cancel the active cycle, the Drain Out function can be used.
A long press of START/PAUSE button, will activate the DRAIN OUT function. The active program will be stopped and the water in the
dishwasher will be drained out.


Specyfikacje produktu

Marka: Indesit
Kategoria: zmywarka
Model: Slimline DF9E 1B10
Liczba ustawień temperatury: 3
Typ kontroli: Przyciski
Wbudowany wyświetlacz: Nie
Długość przewodu: 1.3 m
Położenie urządzenia: Wolnostojący
Częstotliwość wejściowa AC: 50 Hz
Napięcie wejściowe AC: 220-240 V
Wysokość produktu: Standard (80 - 85 cm)
Szerokość produktu: 448 mm
Głębokość produktu: 555 mm
Waga produktu: 27200 g
Szerokość opakowania: 500 mm
Wysokość opakowania: 890 mm
Głębokość opakowania: 675 mm
Rozmiar produktu: Wąski (45 cm)
Kolor panelu sterowania: Biały
Regulowana wysokość górnego koszyka: Tak
Rodzaj pojemnika na sztućce: Kosz
Programy mycia: Eco 50°C, Intensive 65°C, Mixed, Quick 45°C
Liczba miejsc: 9 komplet.
Ilość programów piorących: 5
System suszenia: Statyczne
Poziom hałasu: 51 dB
Opóźniony start czasomierza: Nie
Pół wsadu: Nie
Czas cyklu: 240 min
Temperatura (maks): 70 °C
Czujnik obciążenia: Nie
Klasa emisji hałasu: D
Prąd: 13 A
Obciążenie: 1900 W
Pobór wody na cykl: 11.5 l
Zużycie energii na cykl: 0.78 kWh
Tryb wyłączenia: 0.5 W
Klasa wydajności energetycznej: F
Zużycie energii na 100 cykli: 78 kWh
Wskaźnik konieczności płukania: Nie
Wskaźnik soli: Nie
Wskaźnik pozostałego czasu: Nie
Zabezpieczenie przed dziećmi: Nie
Kraj pochodzenia: Polska
Zabezpieczenie przed przepełnieniem: Tak
Ekstra suchy: Nie
Ochrona szkła: Nie
Światło wewnętrzne: Nie
Wskaźnik podłogowy: Nie
Pobór mocy (pozostawiony): 5 W
Waga wraz z opakowaniem: 29000 g
Kod produktu celnego (TARIC): 84221100
Wbudowany zmiękczacz wody: Tak
Wypełniony wodą: Zimny
Ilość koszy: 2 kosz.
Automatyczne otwieranie drzwi: Nie
Maksymalna temperatura ciepłej wody: 60 °C
Programy automatyczne: Nie
Tworzywo rury: Stal nierdzewna
Czas cyklu (program szybki): 40 min
Czas trwania trybu czuwania: 12 min
Numer klasyfikacji kontroli eksportu (ECCN): 84221100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Indesit Slimline DF9E 1B10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje zmywarka Indesit

Instrukcje zmywarka

Najnowsze instrukcje dla zmywarka

Asko

Asko DBI 644 MIB.S Instrukcja

28 Października 2024
Asko

Asko DFI675XXL Instrukcja

28 Października 2024
Kenmore

Kenmore 12413 Instrukcja

21 Października 2024
Kenmore

Kenmore 13223 Instrukcja

21 Października 2024
Gaggenau

Gaggenau DA045060 Instrukcja

12 Października 2024
Gaggenau

Gaggenau DA045061 Instrukcja

12 Października 2024
Gaggenau

Gaggenau DF271100 Instrukcja

12 Października 2024
Gaggenau

Gaggenau GI 256-161 Instrukcja

11 Października 2024
Miele

Miele G 5132 Selection Instrukcja

10 Października 2024