Instrukcja obsługi Indesit san 300 288l

Indesit Chłodzenie zamrożenia san 300 288l

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Indesit san 300 288l (12 stron) w kategorii Chłodzenie zamrożenia. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

FRIDGE

Contents

Installation, 2-3

Positioning and connection

Reversible doors

Description of the appliance, 5

Overall view

Accessories, 6

Start-up and use, 7-8

Starting the appliance

Chiller system

Using the refrigerator to its full potential

Food hygiene

Maintenance and care, 9

Switching the appliance off

Cleaning the appliance

Avoiding mould and unpleasant odours

Defrosting the appliance

Replacing the light bulb

Precautions and tips, 10

General safety

Disposal

Respecting and conserving the environment

Troubleshooting, 11

Assistance, 12

Operating Instructions

SAN 300

SAAN 300

SAN 400

SAN 400 S

English,1

Installation

Your appliance is supplied with a 13amp fused plug that

can be plugged into a 13amp socket for immediate use.

Before using the appliance please read the instructions

below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved

fuse to BS 1362 should always be used and the fuse

cover re-fitted.

If the fuse cover is lost, the plug must not be used until a

replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking or the

colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and

you should wish to remove it to add a longer cable or to

re-route the mains cable through partitions, units etc.

please ensure that either:

- The plug is replaced by a fused 13amp re-

wireable plug bearing the BSI mark of

approval.

- The mains cable is wired directly into a

13amp cable outlet, controlled by a

switch (in compliance with BS 5733)

which is accessible without moving the

appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit

your socket. The cable should be cut as close as possible

to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded

plug into a socket anywhere else.

! Before placing your new appliance into operation please

read these operating instructions carefully. They contain

important information for safe use, for installation and for care

of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of

the appliance and any furniture above it, and at least 5 cm

between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat

(direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied in

the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator

by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical

socket ensure the following:

 The appliance is earthed and the plug is compliant with the

law.

 The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on

the bottom left side of the fridge (e.g. 150 W).

 The voltage must be in the range between the values

indicated on the data plate located on the bottom left side

(e.g. 220-240V).

 The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it (see Assistance). Do not

use extension cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these

safety measures not be observed.

Reversible doors

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the wires in the mains lead may not

correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

- Connect Green and Yellow wire to terminal marked

'E' or or coloured Green and Yellow.

- Connect Brown wire to terminal marked 'L' or coloured

red or brown.

- Connect Blue wire to terminal marked 'N' or coloured

Black or Blue.

If a 13amp plug (BS 1363) is used it must be

fitted with a 13amp fuse.

If you are in any doubt about the electrical

supply to your machine, consult a qualified

electrician before use.

CE Marking certifies that this appliance conforms to

the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC, 92/31/EEC

& 93/68/EEC

Specyfikacje produktu

Marka:	Indesit
Kategoria:	Chłodzenie zamrożenia
Model:	san 300 288l

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Indesit san 300 288l, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Chłodzenie zamrożenia Indesit

Indesit rg 1142 w eu Instrukcja

4 Lipca 2024

Indesit san 300 288l Instrukcja

4 Lipca 2024

Indesit rg 1140 w eu Instrukcja

4 Lipca 2024

Indesit taan 25 289l Instrukcja

4 Lipca 2024

Indesit ba 12 ix Instrukcja

4 Lipca 2024

Indesit tan 25 v Instrukcja

3 Lipca 2024

Indesit ntaa 25 nx Instrukcja

3 Lipca 2024

Indesit ba 35 fnf ps Instrukcja

3 Lipca 2024

Indesit ban 14x Instrukcja

3 Lipca 2024

Indesit LI8FF2W Instrukcja

3 Lipca 2024

Instrukcje Chłodzenie zamrożenia

Najnowsze instrukcje dla Chłodzenie zamrożenia

Koenic KFZ 531 E NF Instrukcja

7 Października 2024

Respekta KS1220 Instrukcja

6 Października 2024

Marynen cm 2684 dt Instrukcja

5 Października 2024

Junker JC30KB30 Instrukcja

5 Października 2024

Marynen CM 1700 TC Instrukcja

5 Października 2024

Marynen cm 1894 t Instrukcja

5 Października 2024

Marynen cm 2826 dt Instrukcja

5 Października 2024

Junker JC20GB20 Instrukcja

5 Października 2024

Marynen CM 1040T Instrukcja

5 Października 2024

Marynen CM 2890F Instrukcja

5 Października 2024