Instrukcja obsługi Indesit LR8 S2 S B

Indesit Chłodzenie zamrożenia LR8 S2 S B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Indesit LR8 S2 S B (4 stron) w kategorii Chłodzenie zamrożenia. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

A. Light bulb

B. Thermostat knob

C. Thermostat seeting indicator

D. Light button

CONTROL PANEL

Refrigerator compartment

1. Electronic control panel / light unit

2. Shelves

3. Rating plate with commercial name

4. Fruits and vegetables crisper

5. Door reversibility kit

6. Door trays

7. Egg tray

8. Bottle balcony

9. Door seal

Freezer compartment

9. Door seals

10. Freezer drawers

11. Shelves

12. Bottom drawer: coolest zone best for

freezing fresh food

13. Ice tray

14. Black Out Sensor

PRODUCT DESCRIPTION

AB C D

B. Thermostat Knob

MAX MED MIN

TEMPERATURE SETTING

Thermostat set to MIN: low cooling intensity

Thermostat set between MIN and : cooling intensity can be MAX

adjusted according to the preferences.

Thermostat set to MAX: maximum refrigeration intensity.

For the best food conservation MED position is recommended.

Thermostat set to • : cooling and lighting o.

Note: Displayed set points correspond to the average temperature

throughout the whole refrigerator.

DAILY REFERENCE

GUIDE

Before using the appliance carefully read Health and Safety guide.

THANK YOU FOR BUYING A INDESIT PRODUCT.

In order to receive a more complete assistance, please

http://www.indesit.com/register/indesit.html

You can download the Safety Instructions and the Use

and Care Guide by visiting our website

www.indesit.eu and following the Instructions on

the back of this booklet.

WWW

FIRST TIME USE

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, turn the thermostat knob to

switch on the appliance: cooling and light will switch on; set the knob

on the desired power (see: “Control panel”, at page1).

ACCESSORIES

EGG TRAY ICE TRAY

REFRIGERATOR LIGHT

To remove the light bulb turn anticlockwise as shown in the

picture:

Check the bulb. If necessary unscrew the broken bulb and

replace it with a LED bulb of the same type available only at

our After-sales Service Centers or authorized dealers.

The refrigerator compartment light switches on when the

refrigerator door is opened.

SOME OF THE FUNCTIONAL SOUNDS

YOU MIGHT HEAR

A hissing sound when switching on the

appliance for the rst time or after a long

pause.

A gurgling sound when refrigerant uid

enters into the pipes.

BRRR sound is from the compressor running.

Buzzing sound when water valve or fan start

working.

A cracking sound when compressor starts. The CLICK is from the thermostat which

adjusts how often the compressor is running.

After starting the appliance, wait at least 4-6 hours before placing

food into the fridge and into the freezer compartment.

BLACK OUT SENSOR

Through the two liquids

contained, the black out sensor

will give you indication in case

blackout occurs.

2. YELLOW LIQUID

HOW TO USE (set up required at rst use)

1. RED LIQUID

CHECK THE SENSOR TO INFORM IF BLACK OUT IS OCCURRED

If one or both of the liquids are dissolved, this is an indication of increased temperature in the freezer that could be caused by a blackout. Even the