Instrukcja obsługi Indesit IWME 126 (UK)

Indesit pralka IWME 126 (UK)

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Indesit IWME 126 (UK) (20 stron) w kategorii pralka. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

English,1

Contents

Installation, 2-3-4-5-6-7

Unpacking and levelling

Electric and water connections

The first wash cycle

Technical details

Instructions for the fitter

Washing machine description, 8-9

Control panel

Leds

Starting and Programmes, 10

Briefly: how to start a programme

Programme table

Personalisations, 11

Setting the temperature

Setting the spin speed

Functions

Detergents and laundry, 12

Detergent dispenser

Bleach cycle

Preparing your laundry

Special items

Precautions and advice, 13

General safety

Disposal

Saving energy and respecting the environment

Care and maintenance, 14

Cutting off the water or electricity supply

Cleaning your appliance

Cleaning the detergent dispenser

Caring for your appliance door and drum

Cleaning the pump

Checking the water inlet hose

Troubleshooting, 15-16

Assistance, 17-18

WASHING MACHINE

IWME 126

Instructions for use

Installation

! Keep this instruction manual in a safe place for future referen-

ce. Should the appliance be sold, transferred or moved, make

sure the instruction manual accompanies the washing machine

to inform the new owner as to its operation and features.

! Read these instructions carefully: they contain vital infor-

mation on installation, use and safety.

Unpacking and levelling

Unpacking

1. Unpack the washing machine.

2. Check whether the washing machine has been dama-

ged during transport. If this is the case, do not install it

and contact your retailer.

3. Remove the 4 protective

screws and the rubber bush

with the respective spacer,

situated on the rear of the

appliance (see also the instal-

lation leaflet).

NB:The plastic spacers may

fall down inside the machine

once the bolt has been remo-

ved, and will not interfere with

the operation of the machine.

4. Seal the gaps using the plastic plugs provided.

5. Keep all the parts: you will need them again if the wa-

shing machine needs to be moved to another location.

! Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable amount of noise if the

two front feet have not been adjusted correctly.

1. Install the washing machine on a flat sturdy floor, without

resting it up against walls, furniture cabinets or other.

2. If the floor is not per-

fectly level, compensate

for any unevenness by

tightening or loosening

the adjustable front feet

(see figure); the angle

of inclination, measured

according to the worktop,

must not exceed 2°.

Levelling your appliance correctly will provide it with stability and

avoid any vibrations, noise and shifting during operation. If it is pla-

ced on a fitted or loose carpet, adjust the feet in such a way as to

allow enough room for ventilation beneath the washing machine.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply

pipe by screwing it to a

cold water tab using a ¾

gas threaded connection

(see figure).

Before performing the

connection, allow the

water to run freely until it is

perfectly clear.

2. Connect the other end of

the water inlet hose to the

washing machine,

screwing it onto the ap-

pliance’s cold water inlet,

situated on the top right-

hand side on the rear of the

appliance .(see figure)

3. Make sure there are no kinks or bends in the hose.

! The water pressure at the tap must be within the values

indicated in the Technical details table

(on the next page).

! If the water inlet hose is not long enough, contact a

specialist store or an authorised serviceman.

! Ensure that the supply taps are allowing water throu-

gh. Old taps may seize in the closed position and thus

prevent water reaching the machine.

Connecting the drain hose

Connect the drain hose,

without bending it, to a

draining duct or a wall

drain situated between 65

and 100 cm from the floor;

The drain hose may be

connected to an under-

sink trap. Before connec-

ting the drain hose from

the machine ensure that

any blanks or removable

ends have been taken off

the spigot.

If it is place over the edge

of a basin or sink be sure

the free end of the hose

should not be underwater.

! We advise against the use of hose extensions; in case

of absolute need, the extension must have the same

diameter as the original hose and must not exceed 150

cm in length.

Ensure that if the drain hose is pushed into a standpipe,

that the end does not go down more than 15cms (6 in-

ches). If the hose is pushed down too far, this may cause

the machine to self -syphon ie. continuously empty as it

is filling.

Electric connection

Before plugging the appliance into the mains socket,

make sure that:

• the socket is earthed and in compliance with the

applicable law;

• the socket is able to sustain the appliance’s

maximum power load indicated in the Technical

details table ;(see page 5)

• the supply voltage is included within the values i

ndicated on the Technical details table

(see page 5);

• the socket is compatible with the washing

machine’s plug. If this is not the case, replace

the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug

it can be plugged into a 13 amp socket for immediate

use. Before using the appliance please read the instruc-

tions below.

WARNING - THIS APPLIANCE MUST BE EARTHED.

THE FOLLOWING OPERATIONS SHOULD BE CARRI-

ED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved

fuse to BS 1362 should always be used, and the fuse

cover re-fitted. If the fuse cover is lost, the plug must not

be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking or

the colour that is embossed in words on the base of the

plug. Replacements can be obtained directly from your

nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug

and you should wish to re-route the mains cable through

partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re-wearable

plug bearing the BSI mark of approval.

or:

the mains cable is wired directly into a 13 amp cable out-

let, controlled by a switch, (in compliance with BS 5733)

which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make

the pins unusable so that it cannot be accidentally inser-

ted into a socket.

Instructions for connecting cable to an alternative plug:

Important: the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow Earth

Blue Neutral

Brown Live

65 - 100 cm

Where it connects to

the waste water pipe

cut end off spigot or

remove the blanking cap

Specyfikacje produktu

Marka:	Indesit
Kategoria:	pralka
Model:	IWME 126 (UK)

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Indesit IWME 126 (UK), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Indesit

Indesit W 144 XS Instrukcja

15 Stycznia 2025

Indesit WN860WSK Instrukcja

15 Stycznia 2025

Indesit lna 1000 Instrukcja

15 Stycznia 2025

Indesit wia 600 Instrukcja

15 Stycznia 2025

Indesit wite 127 Instrukcja

14 Stycznia 2025

Indesit IM 712B MY TIME UA Instrukcja

14 Stycznia 2025

Indesit IM 602B MY TIME UA Instrukcja

14 Stycznia 2025

Indesit XWD 61452 Instrukcja

13 Stycznia 2025

Indesit IM 762 MY TIME EE Instrukcja

9 Stycznia 2025

Indesit MTWSA 61294 WK EE Instrukcja

30 Grudnia 2025

Instrukcje pralka

Najnowsze instrukcje dla pralka

Samsung p 1453 gw Instrukcja

15 Stycznia 2025

Bauknecht WA Black 714 BW BK Instrukcja

15 Stycznia 2025

Beko WTV8814MMC1 Instrukcja

15 Stycznia 2025

Daewoo DWD-FD1441 Instrukcja

15 Stycznia 2025

Beko WMY71464STR1 Instrukcja

15 Stycznia 2025

Whirlpool AWE 6720 Instrukcja

15 Stycznia 2025

Whirlpool WGD7000D Instrukcja

15 Stycznia 2025

AEG-Electrolux l 88819 Instrukcja

15 Stycznia 2025

AEG-Electrolux L88489FL Instrukcja

15 Stycznia 2025

Beko wmd 26145 Instrukcja

15 Stycznia 2025