Instrukcja obsługi Indesit BTW D61253 (PL)

Indesit pralka BTW D61253 (PL)

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Indesit BTW D61253 (PL) (13 stron) w kategorii pralka. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/13

EN 1

INTENDED USE

This washing machine is exclusively destined to wash

and spin machine washable laundry in quantities

which are usual for private households.

• Observe the instructions given in these Instructions

for Use and the Programme Chart when using the

washing machine

• Keep these Instructions for Use and the

Programme Chart; if you pass on the washing

machine to another person, also give him/her

Instructions for Use and Programme Chart.

SAFETY AND GENERAL RECOMMENDATIONS

1. Safety instructions

• The washing machine is

appropriate for indoor use only.

• Do not store ﬂammable ﬂuids

near the appliance.

• Do not place electrical

appliances on the lid of your

washing machine.

• Children must be supervised to

ensure that they do not play with

the appliance.

• Children younger than 3 years

should be kept away from the

washing machine, unless they

are continuously supervised.

• The washing machine can

be operated by children from

the age of 8 years up, as well

as by people with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge, provided they

are supervised or instructed

regarding the safe use of the

washing machine and they

understand the dangers resulting

from the use. Children must not

play with the washing machine.

Care and maintenance works on

the washing machine must not

be carried out by children without

being supervised.

• Do not attempt to force the lid

open.

• If necessary, the power cable

may be replaced with an

identical one obtained from our

After-Sales Service. The power

cable must only be replaced by a

qualiﬁed technician.

• Before any cleaning or carrying

out maintenance switch off the

washing machine and disconnect

it from the mains supply.

• The ventilation openings in the

base of the washing machine

must not be obstructed by thick

carpet.

2. Packing

• The packaging materials are 100% recyclable

and bear the recycling symbol . Adhere to local

regulations when disposing of packaging material

3. Disposing of packaging and old

washing machines

• This appliance is marked according to the

European directive 2002/96/EC on Waste Electrical

and Electronic Equipment (WEEE). By ensuring

this product is disposed of correctly, you will help

prevent potential negative consquences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product.

• The symbol on the product, or on the

documents accompanying the product, indicates

that this appliance may not be treated as

household waste. Instead it shall be handed over

to the applicable collection point for the recycling

of electrical and electronic equipment. Disposal

must be carried out in accordance with local

environmental regulations for waste disposal.

For more detailed information about treatment,

recovery and recycling of this product, please

contact your local city ofﬁce, your household waste

disposal service or the shop where you purchased

the product.

• The washing machine is built from reusable

materials. It must be disposed of in compliance

with current local waste disposal regulations.

• Before scrapping, remove all detergent residues

and cut off the power cable so that the washing

machine is made unusable.

4. General recommendations

• Do not leave the washing machine connected

when not in use. Turn off the tap.

EN 2

5. EC Declaration of Conformity

• This washing machine has been designed,

constructed and distributed in compliance

with the safety requirements of EC Directives:

2006/95/EC Low Voltage Directive 2004/108/EC

Electromagnetic Compatibility Directive

The Manufacturer is not liable for any damage to

laundry resulting from inadequate or incorrect fabric

care instructions which have been provided with the

garment or article.

BEFORE USING THE WASHING MACHINE

1. Remove the packaging and check

a. Cut and remove the shrink-wrap.

b. Remove the top protection and the protective

corners.

c. Remove the bottom protection by tilting and

turning the washing machine on one rear

bottom corner. Make sure that the plastic part

of the bottom protection (if available on the

model) remains in the packing and not in the

machine bottom.

This is important, as otherwise the plastic part could

damage the washing machine during operation.

d. Open the lid by pressing it slightly down while

raising the handle. Remove the polystyrene

cushion (depending on model).

e. Remove the blue protective ﬁlm from the panel

(depending on model).

• After unpacking, make sure that the washing

machine is undamaged. If in doubt, do not use the

washing machine. Contact After-Sales Service or

your local retailer.

• Keep the packaging materials (plastic bags,

polystyrene parts, etc.) out of reach of children;

they are potentially dangerous.

• If the appliance was exposed to the cold prior to

delivery, keep it at room temperature for a few

hours before operating.

2. Remove the transport bracket

• The washing machine is ﬁtted with transport

screws and a transport bracket to prevent damage

during transport. Before using the washing

machine you must remove the transport

bracket (see “Installation”/“Removal of transport

bracket”).

3. Install the washing machine

• Place the washing machine on a ﬂat and stable

ﬂoor surface.

• Adjust the feet to ensure that the machine is

stable and level (see “Installation”/“Adjust the

feet”).

• In case of wooden or so-called “ﬂoating ﬂoors” (for

instance certain parquet or laminate ﬂoors), place

the appliance on a sheet of plywood with a size of

at least 40 x 60 cm and thickness of at least 3 cm,

which is screwed to the ﬂoor.

• Make sure that the ventilation openings in the

base of your washing machine (if available on your

model) are not obstructed by a carpet or other

material.

4. Water supply

• Connect the water supply inlet hose in accordance

with the regulations of your local water company

(see “Installation”/“Connect the water inlet hose”).

• Water supply: Cold water only

• Tap: 3/4” threaded hose connection

• Pressure: 100-1000 kPa (1-10 bar).

• Only use new hoses for connecting the washing

machine to the water supply. Used hoses must not

be used anymore and should be discarded.

5. Drain hose

• Firmly connect the drain hose to the siphon or

another outlet for drain water. (see “Installation”/

Connect the water drain hose”).

• If the washing machine is connected to a built-in

drainage system, ensure the latter is equipped with

a vent to avoid simultaneous loading and draining

of water (siphoning effect).

6. Electrical connection

• Electrical connections must be carried out by a

qualiﬁed technician in compliance with the manu-

facturer’s instructions and the current standard

safety regulations.

• The technical data (voltage, power and fuses) are

given on the rating plate on the rear of the washing

machine.

• Do not use extension leads or multi sockets.

• Access to the mains plug or disconnection from

the mains supply via a double-pole switch must be

ensured at all times after the installation.

• Do not operate the washing machine if it has been

damaged during transport. Inform the After-Sales

Service.

• Mains cable replacement is only to be carried out

by After-Sales Service.

• The washing machine must be connected exclu-

sively by means of a socket with an earth connec-

tion, in compliance with the regulations in force. In

particular, washing machines installed in premises

containing a shower or a bath must be protected

by a differential residual current device of at least

30 mA. Earthing the washing machine is obliga-

tory under the law. The manufacturer declines all

liability for injury to persons or animals or damage

to property deriving either directly or indirectly from

failure to observe the directions in these Instruc-

tions for Use.

• When using a residual current circuit breaker

(RCCB), only use a model marked with .

Approximate dimensions:

Width: 400 mm

Height: 900 mm

Depth: 600 mm

Specyfikacje produktu

Marka:	Indesit
Kategoria:	pralka
Model:	BTW D61253 (PL)

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Indesit BTW D61253 (PL), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Indesit

Indesit WIE 107 X Instrukcja

14 Października 2024

Indesit WIXE 167 (UK) Instrukcja

11 Października 2024

Indesit LIMPIA TRE Instrukcja

10 Października 2024

Indesit BWE 81496X WV UK Instrukcja

8 Października 2024

Indesit BWE 101496X WV UK Instrukcja

8 Października 2024

Indesit BWA 81496X KV UK Instrukcja

8 Października 2024

Indesit BWE 71496X SV UK Instrukcja

8 Października 2024

Indesit BWE 71496X KV UK Instrukcja

8 Października 2024

Indesit BWE 81496X KV UK Instrukcja

8 Października 2024

Indesit BWE 91496X SV UK Instrukcja

8 Października 2024

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy CS 15102D3-80 Instrukcja

15 Października 2024

GE GSD3715FAA Instrukcja

15 Października 2024

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024

LG WTP22BK Instrukcja

15 Października 2024

Freggia WTIE148 Instrukcja

15 Października 2024

Freggia WISE126R Instrukcja

15 Października 2024

Freggia WISE126B Instrukcja

15 Października 2024

Freggia WISE126 Instrukcja

15 Października 2024

Freggia WISA105 Instrukcja

15 Października 2024

Freggia WISA106 Instrukcja

15 Października 2024