Instrukcja obsługi Imarflex IDC-1810

Imarflex Niesklasyfikowane IDC-1810

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Imarflex IDC-1810 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
5. After use, Press the “ON/OFF” key to switch back to sleeping mode.
6. Unplug the unit after every use.
PARAMETER TABLE:
FUNCTION
DEFAULT
(POWER / TEMP)
ADJUSTABLE
(POWER / TEMP)
TIMER
PRESET
TIMER
H POT OT
2000W
200 - 2000W
0:01-4:00
STIR-FRY
600°C
80°C - 600°C
0:01-4:00
BBQ
520°C
80°C - 600°C
0:01-4:00
STEW
1300W
200W - 2000W
0:01-4:00
SOUP
1600W
-
-
0:01-24:00
PORRIDGE
1300W
-
-
0:01-24:00
WARM
80°C
-
-
0:01-24:00
CLEANING AND MAINTENANCE:
1. Turn o the power and pull out the plug before cleanin g.
2. Wait for the unit to cool down before cleaning.
3. Select proper detergent to remove the dirt.
4. Use neat wet cloth to clean the unit after removing the dirt.
5. Do not clean the unit directly with water.
6. Clean the cooking plate and pan before cooking. Otherwise, dirt after charring is dicult to
clean and the plate may get discoloration.
7. You may clean air vent or air entry’s dirt by vacuum cleaner to suck up or by cotton. If there
is dirt with oil, it is right to use toothbrush with a little detergent to clean the surface. Never
clear inside with water or any kind of liquid.
8. Do not use caustic detergents to clean the unit. It may damage the unit by chemical reactio n.
9. Do not use benzene, thinner, scrubbing brush or polishing powder to clean the induction
cooker.
TROUBLESHOOTING:
PROBLEM
POSSIBLE CAUSE
No Power
Indicator
Power cord not properly plugged
Automatically
switched OFF
Overload Protection
No operation for more than 2h rs
E1
Voltage too low
E2
Voltage too high
E3/E5
Temperature in the cooking plate is
too high
REMINDER: Please do not forget to ll up and send the warranty card with receipt to our email
address imarexfb@evergoodinc.com
Distributed By: Topgadget Distributions, Inc.
2120 A.linao St., Malate, Manila
Made in China
SPECIFICATIONS:
MODEL NO. : C-1810 ID
RATED VOLTAGE : 230Va.c. 60Hz
POWER CONSUMPTION : 2000 Watts
BOX DIMENSION : ______________
UNIT DIMENSION : ______________
GROSS WEIGHT : ______________
UNIT WEIGHT : ______________
IMPORTANT SAFEGUARD:
When using electrical appliances, basic safety precautions should always be followed, including the
following:
1. Read all instructions carefully.
2. Do not use the Ceramic Cooker on any metal table.
3. Do not use the Ceramic Cooker next to devices, which react sensitively to magnet (e.g. radios, TV,
cassette recorders, etc.).
4. Keep curtains, furniture, ammable materials, etc. away from the Ceramic Cooker and from the
convenience outlet where the Ceramic Cooker is plugged.
5. Before using the Ceramic Cooker, check if the voltage indicated corresponds with the convenience
outlet (230Va.c.)
6. Do not use any appliance with a damaged cord or plug. If the cord is damaged it should be replaced
with the same type and size or bring the Ceramic Cooker to the nearest Authorized Service Center.
7. Do not use a two-way socket with another appliance.
8. Do not place the unit near gas stove, an electric burner, in heated oven or near any hot surface.
9. Do not touch the Ceramic Cooker and the power plug with wet hands.
10. Do not block the ventilation slots of the Ceram Cooker. Keep a minimum distance of 10cm to ic
20cm away from the wall or from other items.
11. The Ceramic Cooker’s surface is made of glass, if damaged, unplug immediately.
12. Do not insert objects like wires or tools into the ventilation slots, this may cause electric shocks.
13. Do not allow the cord to touch the hot surface of the unit.
14. The Ceramic Cooker does not heat up during cooking, but the heat from the cookware may
transferred to in the Ceramic Cooker. Do not touch the hot surface of the glass.
15. Scientic tests have proven that Ceram Cookers are safe to use. However, persons with a ic
pacemaker should keep a minimum distance of 60cm from the unit while using.
16. Do not place any metal kitchen utensils, pan lids, knives or other metal objects on the cooker.
These may heat up when the Ceramic Cooker is ON.
17. Do not place any magnetic objects on the glass surface while the Ceramic Cooker is in use.
18. To protect against electric shock, do not immerse the Ceramic Cooker in water.
19. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliances by person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
20. Do not use the unit if the glass is damaged or has a cracked.
21. is Ceramic Cooker is only intended for tabletop use. Th
22. Do not use the Ceramic Cooker for other than intended use.
23. Not intended for outdoor use.
24. For household use only, not intended for any business purposes.
25. Save this instruction for future references.
DESCRIPTION OF PARTS:
CONTROL PANEL:
HOW TO USE:
1. Plug the unit into the convenience outlet A beep sound will be heard and gital display will be . di
ashing and shows - - - - dicating that the unit is ‘ ‘ in ON.
2. Press ON/OFF button and digital display ws dicating that the unit is in standby mode. sho ‘ON’in
3. Place the cookware into the center of the c king plate. oo
4. Then press FUNCTION to select the desire function.
Press button FUNCTION once for ‘HOTPOT’ nction. The default power is 2000W and fu
can be adjusted from 200W to 2000W by pressing UP and DOWN
Press button for nction. The default temperature is 600°C FUNCTION twice ‘STIR-FRY’fu
and can be adjusted from °C to 600°C by pressing UP and DOWN 80
Press button FUNCTION three times for ‘BBQ’ nction. The default fu temperature is
520°C and can be adjusted from °C to 600°C by pressing UP and DOWN 80
Press button for nction. The default power is 1300W FUNCTION four times ‘STEW’fu
and can be adjusted from 200W to 2000W by pressing UP and DOWN
Press button for nction. The default power is 1600W and FUNCTION ve times ‘ ’SOUP fu
it cannot be adjusted
Press button for nction. The default power is FUNCTION six times ‘ ’PORRIDGE fu
1300W and it cannot be adjusted
Press FUNCTION button for nction. The default wer is 80°C seven times ‘ ’WARM fu po
and it cannot be adjusted
TIMER SETTING is only applicable for function. HOTPOT, ST -FRY, BBQ and STEWIR
Select the desired function rst then button . The digital display will press ‘TIMER’ once
be ashing and 0 ault time is 0 minute. Timer can be shows “0: 0” indicating the def
adjusted from 00:01 to 04:00. To conrm the set time, wait until the time steady or stop is
ashing. The timer will start the countdown automatically. If the timer is set “0:00”, the
digital display will ash and the setting will cancel after 10 seconds.
PRESET TIMER is only applicable for SOUP, PORRIDGE and WARM function.
Select the desired function rst then button . The digital display will press ‘TIMER’ once
be flashing and 0shows “0: 0” indicating the default time is 0 minute. Preset time can be
adjusted from 00:01 to 24:00. To conrm the preset time, wait until the time steady or is
stop ashing. Once the preset time is done, a beep sound will be heard and the selected
function will automatically start If the preset . is set “0:00”, the digital display will flash and
the setting will cancel after 10 seconds.
CHILD-LOCK FUNCTION is to lock all the settings at working mode or “Timer” mode.
Under lock status, ceramic cooker would not respond to any key press.
After selecting the desired function, button for press and hold the LOCK 3 seconds to
lock, and digital display shows LOC indicating that all the ‘ ’ settings are lock
To unlock, press and hold LOCK button for 3 seconds
HIGH TEMP. light indicator will light up and digital display will show indicating that ‘HOT’
the cooking plate is hot. Do not touch the cooking plate during cooking process or after
use. It will be extremely hot and may cause burn or injuries. Let the unit cool down before
moving the unit befor cleaning. or e

Specyfikacje produktu

Marka: Imarflex
Kategoria: Niesklasyfikowane
Model: IDC-1810

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Imarflex IDC-1810, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Imarflex

Imarflex

Imarflex IMX-300P Instrukcja

7 Października 2024
Imarflex

Imarflex MDR-5000VA Instrukcja

7 Października 2024
Imarflex

Imarflex SED-5000S Instrukcja

7 Października 2024
Imarflex

Imarflex PR-1000D Instrukcja

7 Października 2024
Imarflex

Imarflex IMX-250 Instrukcja

7 Października 2024
Imarflex

Imarflex IMX-270B Instrukcja

7 Października 2024
Imarflex

Imarflex UPS-850G Instrukcja

7 Października 2024
Imarflex

Imarflex PR-2000D Instrukcja

7 Października 2024
Imarflex

Imarflex MDR-3000VA Instrukcja

7 Października 2024
Imarflex

Imarflex IDC-1810 Instrukcja

7 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024