Instrukcja obsługi ILive IAKB45

ILive nieskategoryzowany IAKB45

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ILive IAKB45 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Controls
Power/Pairing
Indicator Light
Power/Pair/Play/
Pause/Answer
Press and hold for 7 sec.
to turn the unit on
and begin pairing.
Press and hold to turn
the unit On or O.
Press to play or pause
an audio track.
Press to answer an
incoming call.
Volume −/+
Skip Rev/Fwd
Press to skip ahead or
back an audio track.
Press and hold to set
the volume level.
Charging the Battery
Requires a Micro-USB to USB cable (included). Charge fully before use.
1. Using a cable (included), connect to the USB port of a
Micro-USB to USB
powered on computer or USB power adaptor (not included) to charge the unit.
Be sure the computer is not in sleep mode.
LED Indicators
STATUS INDICATOR
Power On Flashing blue light
Low Battery Flashing red light
Charging Solid red light
Charging Complete No light
Pairing Flashing red and blue lights
Pairing a Bluetooth Device
1. Simultaneously power on the unit and begin the pairing process by pressing
and holding the Power/Pair button for approximately 7 seconds. The indicator
will ash red and blue. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select the in your
IAKB45
Bluetooth settings to pair. If your device requests a password, enter the
default password 0 0 0 0 . Refer to the user’s manual for your specic device for
instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, the and an audible
Pairing Indicator will turn solid
chime will sound through the speakers.
After initial pairing, the unit will stay paired unless unpaired manually by the user
or erased due to a reset of the device. If your device should become unpaired or you
nd it is unable to connect, repeat the above steps.
WARNINGS AND PRECAUTIONS
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or
disposed of according to state and local guidelines. They should never be disposed of in normal
household waste, and they should never be incinerated, as they might explode. Contact your local
government for disposal or recycling practices in your area.
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your speakers. After placing speakers in / on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• WARNING: This product may contain chemicals known to the State of California to cause birth
defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
FCC WARNINGS
• Warning: Changes or modications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Features
• Supports Bluetooth
• Built-in microphone
• DC battery power: built-in
rechargeable lithium ion
battery
• Battery life: approx. 3 hours
Includes
• Micro-USB port for battery
recharge
• Removable electronics for easy
cleaning
Washing Instructions
Important: Do not wash this product with the electronic components still inside!
They must be removed or damage and injury may result. See previous sections on
speaker removal.
Machine washing is not recommended for this product.
Hand wash only. Do not tumble dry in a dryer. Do not dry clean.
1. Remove the electronic components before getting wet.
2. Wash below 85° F (30° C) and do not use bleach.
3. Reshape while damp. Lay at to dry.
4. If using an appliance to dry, use an iron on a low setting.
Speaker Removal - Cable Knit version
Sewn into the outer fold of the Cable Knit beanie is a pocket which holds the
speakers and controller in place. This pocket can be accessed through an opening
along the top of the fold. To remove the electronic components, gently work them
out by hand through this opening.
Install is the reverse of the removal. Be sure to t the controller and speaker snugly
into their places on the sides of the beanie, and push the wires all the way down
and into the outer fold.
Playing Audio Wirelessly
1. Use the connected Bluetooth device to select and start playing audio.
2. Once audio is heard playing through the unit, you can use the controls on the
connected Bluetooth Device or the unit to play, pause, and skip audio tracks.
Speaker Removal - Smooth Knit version
Sewn into the interior of the Smooth Knit beanie is a pocket which holds the
speakers and controller in place. This pocket can be accessed through an opening
along the inside seam of the beanie. To remove the electronic components, gently
work them out by hand through this opening. A combination of squeezing/pushing
the speaker and controller from the outside, and pulling the wires through the
opening on the inside, is the best removal method.
Install is the reverse of the removal. Be sure to t the controller and speaker snugly
into their places on the sides of the beanie, and pull the wires all the way through
and into the pocket.
Cable Knit
Smooth Knit
International Support
To download this User’s Guide in English, Spanish, or French, or to get answers to
frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour
obtenir des réponses à des questions fréquemment posées, consultez la rubrique
d’assistance sur:
www.iLiveElectronics.com
Contact Information
Website: www.iLiveElectronics.com
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the
most up-to-date version of this
User’s Guide, go to:
www.iLiveElectronics.com
Wireless Music Beanie
User’s Guide for IAKB45 v1701 - Cable and Smooth Knit Versions
Pro te ct fo r To day
Sus tain for To mo rr ow
Made
Gr ene Copyright © 2016 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property of their respective owners.
Specications are subject to change without notice.

Specyfikacje produktu

Marka: ILive
Kategoria: nieskategoryzowany
Model: IAKB45

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ILive IAKB45, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany ILive

ILive

ILive ISBW104B Instrukcja

21 Września 2024
ILive

ILive IMP301 Instrukcja

26 Maja 2024
ILive

ILive IAKB45 Instrukcja

10 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024