Instrukcja obsługi ILive IAHB53


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ILive IAHB53 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Bluetooth Headphones
User’s Guide for Model IAHB53 3143-01
Controls and Functions
DC IN
LED
Charging the Battery
To charge the battery, use the cable (included), USB-C to USB
to connect to the USB port of a powered-on computer or a UL
certied USB power adaptor (not included). Charge fully before
use. The initial charge time is approximately 2 hours.
DC IN
LED
Play/Pause/Phone
Press to play or pause audio.
Press to answer an incoming phone call.
Press twice to activate voice assistant.
Features
Includes
USB-C to USB charging cable
3.5mm Cable
Bluetooth 5.3 – range 33 ft.
Built-in microphone
3.5mm Aux In
Adjustable headband
Folds for travel
On-ear controls
Rechargeable battery
Playback up to 7 hours at 50% volume
Microphone
AUX IN
MIC
Indicator LED
Power Button
Volume and Track Control
Press Vol- to decrease volume.
Press and hold Vol- to go to the previous track.
Press Vol+ to increase volume.
Press and hold Vol+ to go to the next track.
Bluetooth Pairing Button
Press and hold to manually enter pairing mode.
When in pairing mode, the Indicator LED will
ash red and blue. DC In Port
STATUS INDICATOR
Power On Flashing blue light
Charging Solid red light
Charging Complete Light OFF
Pairing Flashing red / blue light
Pairing Complete Flashing blue light
Aux In
LED
Aux In
Aux mode will function even if the headphones are not
powered on. To conserve battery power, the headphones will
automatically power o when using Aux In.
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Aux In on the
headphones and the audio output on an audio device.
2. Use the controls on the connected device to select and
play audio.
Pairing Bluetooth
1. Power on the headphones. The headphones default to
Bluetooth Mode and are ready to pair automatically.
When pairing, stay within 3 feet of the Bluetooth device.
2. On your Bluetooth device, search for nearby devices
in your Bluetooth settings and select IAHB53. When
successfully connected to your Bluetooth device, a voice
prompt will announce the Bluetooth connection.
3. Audio played through the connected Bluetooth device
will now be heard through the headphones. Use the
controls on the connected device to play audio and
adjust volume.
Note: To pair to a dierent Bluetooth device, press and hold the
Bluetooth Pairing button to manually enter Pairing Mode.
Customer Support
Customer Service: | Email Support: 1-888-999-4215 prodinfo@
dpiinc.com partsinfo@dpiinc.com | Email Parts:
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2023 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the users authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Additional Warnings
WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
This product meets and complies with all Federal regulations.
To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
Previously Connected Devices
The headphones can remember multiple Bluetooth
devices and will always try to reconnect to the last device
used.
To reconnect to a dierent device, turn o Bluetooth on
unwanted devices, then access the Bluetooth settings
menu on the device you wish to use and select IAHB53.
AUX IN
MIC


Specyfikacje produktu

Marka: ILive
Kategoria: Niesklasyfikowane
Model: IAHB53

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ILive IAHB53, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane ILive

ILive

ILive INL252 Instrukcja

4 Października 2024
ILive

ILive ISB103 Instrukcja

4 Października 2024
ILive

ILive IAWP28 Instrukcja

4 Października 2024
ILive

ILive IAB13 Instrukcja

4 Października 2024
ILive

ILive ISB301 Instrukcja

4 Października 2024
ILive

ILive ISB13 Instrukcja

4 Października 2024
ILive

ILive IAA400 Instrukcja

4 Października 2024
ILive

ILive IFB290 Instrukcja

4 Października 2024
ILive

ILive IKBC384S Instrukcja

4 Października 2024
ILive

ILive IWC330 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024