Instrukcja obsługi Ikegami PAC-508

Ikegami Kamera monitorująca PAC-508

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ikegami PAC-508 (12 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

IN S T A L L A T I O N A N D OP E R A T I N G IN S T R U C T I O N S

WWW.I K E G A M I .C O M

PAC-508 SERIES

PAC-509 SERIES

CYLINDRICAL HOUSING PACKAG ES

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating

instructions should be read before the unit is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the unit and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

5. Cleaning - Unplug the unit from the outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

6. Attachments - Do not use attachments not recommended

by the product manufacturer as they may cause hazards.

7. Accessories - Do not place this unit on an unstable stand,

tripod, bracket, or mount. The unit may fall, causing

serious injury to a person and serious damage to the unit.

Use only with a stand, tripod, bracket, or mount

recommended by the manufacturer or sold with the

product. Any mounting of the unit should follow the

manufacturer's instructions and should use a mounting

accessory recommended by the manufacturer.

An appliance and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart

combination to overturn.

8. Ventilation - Openings in the enclosure, if any, are

provided for ventilation, to ensure reliable operation of

the unit, and to protect it from overheating. These

openings must not be blocked or covered. This unit

should not be placed in a built-in installation unless proper

ventilation is provided or the manufacturer's instructions

have been adhered to.

9. Power Sources - This unit should be operated only from

the type of power source indicated on the marking label.

If you are not sure of the type of power supply you plan

to use, consult your appliance dealer or local power

company. For units intended to operate from battery

power or other sources, refer to the operating

instructions.

10. Grounding or Polarization - This unit may be equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

Alternatively, this unit may be equipped with a 3-wire

grounding-type plug, a plug having a third (grounding) pin.

This plug will only fit into a grounding-type power outlet.

This is a safety feature. If you are unable to insert the plug

into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the

grounding-type plug.

11. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords and plugs, convenience

receptacles, and the point where they exit from the

appliance.

12. Power Lines - An outdoor system should not be located in

the vicinity of overhead power lines or other electric light

or power circuits or where it can fall into such power lines

or circuits. When installing an outdoor system, extreme

care should be taken to keep from touching such power

lines or circuits as contact with them might be fatal. U.S.A.

models only - refer to the National Electrical Code Article

820 regarding installation of CATV systems.

13. Overloading - Do not overload outlets and extension

cords as this can result in a fire or electric shock.

14. Object and Liquid Entry - Never push objects of any kind

into this unit through openings, as they may touch

dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any

kind on the unit.

15. Servicing - Do not attempt to service this unit yourself as

opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

16. Damage Requiring Service - Unplug the unit from the

outlet and refer servicing to qualified service personnel

under the following conditions:

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled or objects have fallen into the

unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the unit to its normal

operation.

e. If the unit has been dropped or the cabinet has been

damaged.

f. When the unit exhibits a distinct change in

performance--this indicates a need for service.

17. Replacement Parts - When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or have

the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other

hazards.

18. Safety Check - Upon completion of any service or repairs

to this unit, ask the service technician to perform safety

checks to determine that the unit is in proper operating

condition.

19. Coax Grounding - If an outside cable system is connected

to the unit, be sure the cable system is grounded. U.S.A.

models only--Section 810 of the National Electrical Code,

ANSI/NFPA No.70-1981, provides information with

respect to proper grounding of the mount and supporting

structure, grounding of the coax to a discharge unit, size

of grounding conductors, location of discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode.

20. Lightning - For added protection of this unit during a

lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet

and disconnect the cable system. This will prevent

damage to the unit due to lightning and power line

surges.

Debido a limitaciones de espacio, esta etiqueta puede apare-

cer en la parte inferior de la unidad.

El símbolo representado por un relámpago con

punta de flecha dentro de un triángulo equilátero,

se muestra con el objetivo de alertar al usuario

que existen "voltages peligrosos" sin aislamiento,

dentro de la cubierta de la unidad. Dichos volt-

ages pueden ser de tal magnitud que constituyen

un riesgo de choque eléctrico a personas.

El símbolo de exclamación dentro de un triángulo

equilátero, se muestra con el objetivo de alertar

al ususario de que instrucciones de operación y

mantenimiento importantes acompañan al equipo.

Aus Platzgründen kann diese Warnung auf der Unterseite

des Gerätes angebracht sein.

Das Blitzsymbol im gleichseitigen Dreieck soll den

Benutzer auf nicht isolierte "Hochspannung" im

Gehäuse aufmerksam machen, die eventuell stark

genug ist, um einen elektrischen Schlag zu verur-

sachen.

Das Ausrufezeichen im gleichseitigen Dreieck soll

den Benutzer auf wichtige Bedienungs- und

Wartungsanleitungen in der dem Gerät beige-

fügten Literatur aufmerksam machen.

En raison de limitation de place, cette étiquette peut être

placée sur le dessous de l'appareil.

L'éclair fléché dans un triangle équilatéral, avertit

l'utilisateur de la présence d'une "tension dan-

gereuse" non isolée à l'intérieur de l'appareil et

d'une valeur suffisante pour constituer un risque

d'électrocution.

Le point d'exclamation contenu dans un triangle

équilatéral, avertit l'utilisateur de la présence,

dans la documentation qui accompagne l'appareil,

de consignes d'utilisation et de maintenance

importantes.

This label may appear on the bottom of the unit due to space

limitations.

The lightning flash with an arrowhead symbol

within an equilateral triangle is intended to alert

the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL

SHOCK, DO NOT OPEN COVERS. NO USER SERVICE-

ABLE PARTS ARE INSIDE. REFER SERVICING TO QUALI-

FIED SERVICE PERSONNEL.

Danger: Pour éviter tout risque d'électrocution, ne pas

ouvrir le boîtier. Il n'y a pas de pièces remplaçables à

l'intérieur. Pour toute révision, s'adresser à un technicien

spécialisé.

VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU

VERMEIDEN, ABDECKUNG NICHT ENTFERNEN.

WARTUNGEN ALLER ART QUALIFIZIERTEM PERSON-

AL ÜBERLASSEN.

exclaim.eps

Precaucion: Para Reducir El Riesgo De Choque Eléctrico,

Favor No Abrir La Cubierta. Este Equipo No Consta De

Piezas O Partes Que Requieren Servicio O

Mantenimiento. Para Reparaciones Favor Referirse A Un

Técnico Calificado.

SAFETY PRECAUTIONS SICHERHEITSVORKEHRUNGEN

SECURITE

PRECAUCIONES DE SEGURIDAD

Specyfikacje produktu

Marka:	Ikegami
Kategoria:	Kamera monitorująca
Model:	PAC-508

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ikegami PAC-508, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca Ikegami

Ikegami ECO-312700 Instrukcja

1 Października 2024

Ikegami ICD-809 Instrukcja

1 Października 2024

Ikegami ICD-38 Instrukcja

1 Października 2024

Ikegami ICD-68 Instrukcja

1 Października 2024

Ikegami ICD-E11 Instrukcja

1 Października 2024

Ikegami Hyper Dynamic IPD-BX11 Instrukcja

1 Października 2024

Ikegami ISD-A21 Instrukcja

1 Października 2024

Ikegami ISD-A15 Instrukcja

1 Października 2024

Ikegami High Performance IPD-DM100 Instrukcja

1 Października 2024

Ikegami ICD-525 Instrukcja

1 Października 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Trebs CCD-401C Instrukcja

15 Października 2024

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024

D-Link DCS-7510 Instrukcja

15 Października 2024

Ubiquiti Networks UniFi Video UVC-G3-AF Instrukcja

14 Października 2024

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024

Alecto DVC-215IP Instrukcja

13 Października 2024

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024