Instrukcja obsługi Iiyama WP II960A

Iiyama prezenter bezprzewodowy WP II960A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Iiyama WP II960A (8 stron) w kategorii prezenter bezprzewodowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

ScreenBeam®

960

ScreenBeam 960

Wireless Display Receiver

Quick Start Guide

This Quick Start Guide provides the instructions on how to install ScreenBeam 960

receiver, connect client devices, and setup for deployment. Refer to the support

website for the full deployment guide, latest updates, and best practices.

Before Beginning Deployment

Before deploying ScreenBeam products, check for the latest ﬁrmware, release

documentation and tech tips.

zFor ScreenBeam receiver’s deployment guide, ﬁrmware upgrades, and release

notes, go to: https://support.screenbeam.com/960

zFor Miracast™ or native macOS/iOS wireless display connection tutorial, go to:

https://www.screenbeam.com/setup

zFor ScreenBeam Central Management System (CMS) software, go to:

https://support.screenbeam.com/cms

zFor Open Source information, go to: https://opensource.screenbeam.com

Package Contents

zScreenBeam 960 receiver

zPower supply

zHDMI cable

zQuick Start Guide (this document)

zRegulatory documents

Documentation

For FAQs, troubleshooting tips

and support, visit:

https://support.screenbeam.com

Need Help?

To open a ticket for support, visit:

https://support.screenbeam.com/ticket

1 | screenbeam.com

quick start guide

Requirements

Minimum System Requirements

The latest Windows 7 and later, macOS 10.10 and later, iOS 9

and later, or Android 4.2 or later with Miracast; refer to online

support for the latest list.

Network Requirements

Refer to the online support for the most recent information.

Note: Additional network conﬁguration is not required for

Wi-Fi Miracast enabled device to connect. Verify Group

Policy and ﬁrewall settings to allow Wi-Fi Direct groups or

hosted networks.

Setup Requirements

zScreenBeam 960 receiver

zDisplay with an available HDMI input

zAn ethernet network connection with DHCP IP or a

Wi-Fi router

Note: This is used for wireless display over LAN and

management.

zScreenBeam wireless display app

Note: Not required for Windows 10/8.1, macOS, and iOS

with native screen mirroring support.

2 | screenbeam.com

A. Connect Receiver to Display

Figure 1 Connection guide

1. Place the receiver next to the display.

2. Connect one end of the provided HDMI cable to the

receiver’s HDMI port and the other end to an available HDMI

port on the display.

Note: For VGA connection details, refer to the

ScreenBeam 960 User Guide.

3. Optional: If the display has USB HID touch capability, insert

the HID USB connector into the USB port of the receiver.

(USB Cable is not included)

4. Connect the receiver’s power supply to the receiver’s power

port, then to an electrical outlet.

5. Optional: Connect one end of the Ethernet cable to the

receiver’s Ethernet port and connect the other end to

the network switch with DHCP IP. (Ethernet cable is not

included).

Note: Refer to section B for more information on setting

up a network connection.

6. Turn on the display and switch to the corresponding input

connected to the receiver.

7. Wait about 30 seconds, then verify the Ready to Connect

screen appears on the display.

ScreenBeam

960

screenbeam.com | 3

B. Set Up Network Connection

ScreenBeam requires network connection for various

purposes; Wireless display over LAN support and management

of the receiver. ScreenBeam can be connected to the network

via wired or Wi-Fi connection.

Wired Connection

If ScreenBeam is connected to a DHCP-enabled network, the

Ready to Connect screen will show the IP address assigned

to the ScreenBeam.

Wi-Fi connection or Static IP address

This requires additional steps to conﬁgure the receiver with the

proper network information. Detailed instructions are available

online at . For initial testing https://support.screenbeam.com

purpose, we recommend using wired network connection with

DHCP-enabled.

C. Connect Client Device

This section provides instructions on how to connect using

native screen mirroring from the most common operating

systems. Refer to www.screenbeam.com/setup for details and

instructions for all other operating systems.

Note: The web page will display the instructions based

on the client-device OS. Use the links at the bottom of the

web page to select OS-speciﬁc instructions.

Connect using Windows 10/8.1

To connect using Windows 10, follow the instructions below.

Steps for Windows 8.1 may vary.

1. Open the action center by swiping from the right side of

the touchscreen selecting the speech bubble icon in the or

lower right corner of the screen. (Windows key + K)

2. Select and wait for available receiver(s) to appear. Connect

3. Select the receiver name that matches the receiver name

shown on the screen.Ready to Connect

4. Enter in the PIN code if required. If the PIN code is not

displayed, try the hidden PIN “12345670” or contact the

admin for ScreenBeam.

5. Optional: Select the box Allow mouse, keyboard, touch,

and pen input from this device if the display panel/

projector supports interactive touch. Refer to section F for

more details on using interactive touch.

6. Optional: Select and choose Change projection mode

Extend Duplicate or if desired.

Note: To disconnect or change the projection mode,

return to the menu.Connect

Specyfikacje produktu

Marka:	Iiyama
Kategoria:	prezenter bezprzewodowy
Model:	WP II960A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Iiyama WP II960A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje prezenter bezprzewodowy Iiyama

Iiyama WP II960A Instrukcja

8 Września 2024

Instrukcje prezenter bezprzewodowy

Najnowsze instrukcje dla prezenter bezprzewodowy

Edimax WP-S1300 Instrukcja

10 Października 2024

Vantec NBW-100U Instrukcja

7 Października 2024

Barco XMS Cloud Instrukcja

7 Października 2024

Xcellon WP-10R Instrukcja

6 Października 2024

HuddleCamHD HuddleShare Instrukcja

5 Października 2024

August PCR500 Instrukcja

3 Października 2024

SIIG CE-WR0012-S1 Instrukcja

3 Października 2024

SIIG CE-H26611-S1 Instrukcja

3 Października 2024

SIIG CE-WR0112-S1 Instrukcja

3 Października 2024

ByEasy P6000 Instrukcja

2 Października 2024