Instrukcja obsługi IHome iP16

IHome budzik radiowy iP16

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IHome iP16 (8 stron) w kategorii budzik radiowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

Model iP16

Portable Alarm Clock Speaker

System for your iPhone / iPod ®

Questions? Visit www.ihomeaudio.com

Quick Start

Controls and Indicators

iP16 Display

Install Clock Backup Battery

Using iP16

Charging your iPhone / iPod

Listening to your iPhone / iPod

Setting the Time

Alarm Operation

Sleep Operation

Snooze/Dimmer Operation

A Consumer Guide to Product Safety

Trouble Shooting

Solución De Problemas

Warranty Information

Table of Contents

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material

should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine,

thinner or similar materials can damage the surface of the unit.

NOTE: Be careful not to touch the surface of the speakers at either end of the unit

Maintenance

Getting Started

Thank you for purchasing the iHome iP16 Audio Speaker System for your iPhone/iPod. Designed

specifically to work with your iPhone/iPod, this system provides high quality audio performance that

brings out the best in your music.

Please read this instruction book carefully before operating the iP16 and keep it for future reference.

Check for iPhone/iPod compatibility

iP16 is an advanced system and supports most updated iPod features. To make sure your iPhone/iPod works properly

with iP16, please update your iPhone/iPod firmware with the latest version via iTunes.

3:iPhone/iPod1:power

Attach the AC adaptor cable to

the DC jack on the back of the

iP16 and plug the other end into a

working wall socket. For portable

operation, remove battery

compartment door on the bottom

of the unit and insert 4 AA batteries

(see diagram on page 4).

RESET

TEST

Gently dock iPhone/iPod into dock

(iPhone/iPod must not be in a skin

or case). iPhone/iPod will charge

while docked.

Press the Power Button on the iP16

to play the iPhone/iPod.

2:inserts

4:time

Quick Start

See the table below to find which side

of the dock insert matches your

iPhone/iPod model and place insert

in dock. NOTE: iPhone 3G, iPhone

3GS, iPod Classic 160 GB and nano

6G do not require the insert.

1) Turn insert so correct side of the

insert for your iPhone/iPod is facing

the display.

2) Slide insert downwards until it

snaps into place

all iPod nano models

up to nano 5G

no insert needed for

iPod Classic 160 GB

iPhone 3G/3GS

iPod nano 6G

Classic/Touch side Nano side

iPod classic (80, 120 GB)

iPhone 4, touchiPod

For this

iPhone/iPod

Use this insert

FCC Information

Battery Warning

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

For models that use Lithium batteries

• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high

temperatures & not handled appropriately

• Do not place loose batteries in a pocket, purse, or other container containing metal objects, do not mix with used or other

battery types, or store with hazardous or combustible materials.

• Store in cool, dry, ventilated area.

• Follow applicable laws and regulations for transport and disposal.

For models that require more than one battery

• Do not mix with used or other battery types/brands

• Replace all batteries at the same time

• Do not open batteries

• Do not dispose of in fire

• Do not heat above 75ºC (167ºF)

• Do not expose contents to water

• Do not charge or recharge

• Do not install backwards

To use Time Sync, dock your iPhone or iPod touch and press the Clock

Adj. Button. SYN will appear on the display and the unit will sync to the

time on your iPhone or iPod.

To set time manually,

• Press the DST On/Off Button on the back of the unit as needed to add

or subtract an hour for daylight saving time or standard time.

• Press & Hold the Clock Adj. button on the back of the unit until

the hour display flashes.

• Press the + - buttons or to set the hour, then press the Clock Adj. button

• Press the + - buttons or to set the minutes then press the Clock Adj.

button again to confirm time setting.

Up/Plus Button

Down/Minus Button

DST On/Off button

Clock Adj. ButtonSleep Button

Power Button

Snooze/Dimmer Button

Alarm Button

DC Jack

Controls and Indicators

Front Panel

Back Panel

Press to power unit

ON or OFF

Decrease volume,

time setting

Silence alarm temporarily

or adjust display brightness

Press to add or

subtract 1 hour for

daylight saving time

Increase volume,

time setting

Press and hold for

Clock Adjust mode

Press for Sleep mode

Connect AC adapter

Press and hold for

Alarm Setting mode

iP16 Display

Install Clock Backup Battery

Alarm Indicator

Battery Low Indicator

Daylight Saving Time

Indicator

iPhone/iPod Indicator

Sleep Indicator

PM Indicator Time Display

The iP16 uses a CR2032 button cell battery (included with instructions) to keep

alarm and clock settings in the event of a power failure and 4 “AA” batteries to

maintain alarm operation.

If the Backup Battery has been installed and a power failure occurs or the AC

adaptor is accidentally disconnected, the display backlight will not remain lit, but

current time and alarm time settings will be temporarily maintained. Otherwise,

you must reset the time and alarm settings. If 4 “AA” batteries are installed, alarm will

operate when unit is not connected to AC adaptor.

1. Please make sure the AC adaptor is connected. Otherwise all settings may

be lost during battery replacement.

2. Open and remove the battery compartment door located on the bottom of the unit.

3. Pinch the backup battery release tab and pull the backup battery holder free.

4. Insert one CR2032 button cell battery with the + side facing upwards.

5. Replace the backup battery holder into the unit, then replace the battery

compartment door.

Note: Make sure you dispose of batteries properly (see your local regulations).

Note: Buttons will not function if only back up battery installed.

Using iP16

Installing Backup Battery



Pinch to release

Specyfikacje produktu

Marka:	IHome
Kategoria:	budzik radiowy
Model:	iP16
Kolor produktu:	Szary
Napięcie wejściowe AC:	100 - 240 V
Bluetooth:	Nie
Moc wyjściowa (RMS):	- W
Zasilacz sieciowy:	Tak
Kanały wyjścia audio:	- kan.
Rodzaj baterii:	AA
Liczba baterii:	4
Alarm:	Tak
Kompatybilność dokowania produktów Apple:	iPhone, iPod
Zasięg częstotliwości:	- Hz
Wbudowana bateria:	Nie
Wbudowana ładowarka:	Tak
Wyświetlacz zegara/daty:	Tak
Technologia wspomagająca poprawę dźwięku:	Reson8