Instrukcja obsługi IHome iBTB2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IHome iBTB2 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
resetusb
iBTB2
QUICK START GUIDE
CHARGE BEFORE USE
DOUBLE WALL INSULATED
STAINLESS STEEL BOTTLE
+ REMOVABLE WATERPROOF
BLUETOOTH SPEAKER
CONTROLS & INDICATORS
BACK:
Waterproof Cover
Power
Button
USB Charge Port
Reset Port
Bluetooth
Button
FRONT: Play/Pause
Button
Charge/Battery
Indicator: Green = charged
CHARGE
SPEAKER
BEFORE USE
Connect included USB cable to USB Charging
Port (under waterproof cover) and to
USB power source such as USB AC adapter
connected to working outlet
Red = charging
GETTING STARTED
resetusb
Battery LED
Indicator
Bluetooth LED
Indicator
Bluetooth
Indicator: Slow blink
= auto-link
Solid
= paired
Fast blink
= pairing
PAIRING BLUETOOTH
Pairing the First Time
Manual Pairing
iHome
iBTB2
Make your Bluetooth device “discoverable”
Press and hold the Power Button on back of speaker
for 3 sec. to power ON.
The first time the unit is powered on it will
enter auto-pairing mode.
Select “iHome iBTB2” on your device’s
Bluetooth menu to complete pairing.
To manually pair, power speaker ON. Press and hold
Bluetooth Button for 2 seconds, then select “iHome iBTB2”
on your device’s Bluetooth menu to complete pairing.
3s 2s
3s
PLAYING BLUETOOTH AUDIO
SPEAKERPHONE
Press Play/Pause Button
to play or pause Bluetooth audio.
• Press 2x to skip to next song
• Press 3x to skip to previous track
OR start of currrent track
Press and hold the Power Button
for 3 sec. to power OFF.
Speaker must be ON and paired to
Bluetooth device to use speakerphone.
• Press Play/Pause Button to answer/end call
Press and hold Play/Pause Button
for 2 seconds to decline call
2s
HOW TO USE BOTTLE & SPEAKER
The Bottle and Speaker
can be unscrewed
to use separately
Screw the speaker base
to bottom of bottle
for best stability when
using separately
Speaker is waterproof
(keep cover closed near water)
See Bottle Cautions
for best experience
Unscrew cap to fill bottle
Cap
Bottle
Speaker
Base
iHome
iBTB2
TIP: on some iOS (Apple) devices; you can view the iBTB2 battery status on your
device's screen. When device is paired and connected; look for a vertical battery
icon next to the Bluetooth icon on the upper right corner of the device's screen.
Bluetooth is a registered trademarks of Bluetooth SIG Inc.
Bluetooth technology is incorporated under license from Bluetooth SIG Inc.
Wash with warm water, mild dish soap and rinse the
bottle thoroughly prior to first use and after each use
Remove bottle cap and thoroughly wash the removable
silicone cap collar after each use
Do not microwave or place in freezer
Caution: Hot beverages will remain hot for several hours
DO NOT overfill
DO NOT use with alcoholic or carbonated liquids that can
cause pressure build up and potential lid failure
Always be certain the lid is securely attached to bottle
before using it
The unit is IP67 waterproof rated, meaning it is immersible for
up to 30 minutes at a depth of 1 meter (3 feet). It will typically
withstand rain, snow and being submersed in shallow water.
Longer duration or deeper immersion that exceeds the tested
limits may cause product failure and void the warranty.
DO NOT immerse the unit in water for extended periods.
DO NOT immerse the unit in water deeper than 1 meter
(about 3 feet).
Make sure cover and surrounding surfaces are completely dry
before opening cover to prevent moisture from damaging
the internal electronics.
Keep rubber cover free of dirt, sand, or other objects that can
interfere with proper sealing. If for any reason the waterproof cover
is not making a tight waterproof seal water may enter the unit.
Rinse with tap water after immersion in salt water or swimming pool.
DO NOT clean unit with oily soaps or use chemicals or solvents.
Clean with damp cloth.
ready
for
water
not
ready for
water
For proper waterproof operation, make sure the waterproof
cover on the back of the unit is completely flush with
the unit by pressing along the entire edge of the cover
until it is completely and securely in place.
BOTTLE CAUTIONS
RESETTING UNIT
WATERPROOF OPERATION
IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION
Contact Us: 1•800• 288•2792 For warranty visit:
www.ihome.com/support
If unit doesn’t respond during use, insert the end of a paper
clip or similar into the Reset Port located under the
waterproof cover. Doing so will clear all previous settings
(Bluetooth devices will need to be re-paired). Power unit on
to resume normal operation.


Specyfikacje produktu

Marka: IHome
Kategoria: nieskategoryzowany
Model: iBTB2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IHome iBTB2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany IHome

IHome

IHome iZABT50 Instrukcja

15 Września 2024
IHome

IHome iP88 Instrukcja

15 Września 2024
IHome

IHome iBTB2 Instrukcja

15 Września 2024
IHome

IHome AQUIO iBTB2 Instrukcja

15 Września 2024
IHome

IHome iBT372 Instrukcja

15 Września 2024
IHome

IHome iBT78 Instrukcja

15 Września 2024
IHome

IHome iBT370v2 Instrukcja

15 Września 2024
IHome

IHome iBT81 Instrukcja

15 Września 2024
IHome

IHome iBTW38 Instrukcja

15 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024