Instrukcja obsługi IFM VSE003


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM VSE003 (10 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
Operating instructions
Diagnostic electronics
for vibration sensors
VSE003
80289760/00 03/2020
UK
2
Contents
1 Preliminary note 3 ���������������������������������������������������������������������������������������������������
2 Safety instructions 3 �����������������������������������������������������������������������������������������������
3 Functions and features 3 ����������������������������������������������������������������������������������������
4 Installation������������������������������������������������������������������������������������������������������������5
4�1 Installation of the sensors 5 ������������������������������������������������������������������������������
5 Electrical connection 5 ��������������������������������������������������������������������������������������������
5�1 Limited voltage / current 6 ��������������������������������������������������������������������������������
5�2 Wiring�������������������������������������������������������������������������������������������������������������6
5�2�1 Wiring of the sensors 1���4 (S1���S4) according to the sensor 7 �������������
5�3 Connection of the sensors 7 �����������������������������������������������������������������������������
5�3�1 Monitoring the sensor cable 8 �����������������������������������������������������������������
5�4 Ethernet connection 8 ���������������������������������������������������������������������������������������
5�5 IP address 8 ������������������������������������������������������������������������������������������������������
6 Operation �������������������������������������������������������������������������������������������������������������8
6�1 Settings ���������������������������������������������������������������������������������������������������������8
7 Indicators (LEDs) 9 �������������������������������������������������������������������������������������������������
8 Maintenance, repair and disposal 10 ����������������������������������������������������������������������
9 Scale drawing 10 ����������������������������������������������������������������������������������������������������
3
UK
1 Preliminary note
An instruction is indicated by "►":
Example: ► Mount the unit as shown.
Important note
Non-compliance may result in malfunction or interference
Information
Supplementary note
2 Safety instructions
Please read the operating instructions prior to set-up of the unit� Ensure that
the product is suitable for your application without any restrictions�
The unit conforms to the relevant regulations and EC directives�
Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application�
Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator
The design of the unit corresponds to protection class III (EN61010) except for
the terminal blocks� Protection against accidental contact (safety from finger
contact to IP 20) for qualified personnel is only ensured if the terminals have
been completely inserted� Therefore the unit must always be mounted in a
control cabinet of at least IP 54 which can only be opened using a tool�
For DC units the external 24 V DC supply must be generated and supplied
according to the requirements for safe extra-low voltage (SELV) since this
voltage is provided near the operating elements and at the terminals for the
supply of sensors without further protection measures�
3 Functions and features
The diagnostic electronics has 2 analogue inputs and 4 dynamic inputs� These
inputs can be used for process value monitoring, vibration monitoring, vibration
diagnostics or analysis of other dynamic signals�
An analogue current signal or a pulse signal can be connected to the analogue
inputs� They can be used as speed input for vibration diagnostics, as trigger of
a measurement or for process value monitoring�


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: VSE003

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM VSE003, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM TW2001 Instrukcja

14 Stycznia 2025
IFM

IFM EVC231 Instrukcja

13 Stycznia 2025
IFM

IFM UGT582 Instrukcja

13 Stycznia 2025
IFM

IFM TY0058 Instrukcja

13 Stycznia 2025
IFM

IFM OT5012 Instrukcja

11 Stycznia 2025
IFM

IFM SUH201 Instrukcja

11 Stycznia 2025
IFM

IFM LW2760 Instrukcja

5 Stycznia 2025
IFM

IFM AL2305 Instrukcja

5 Stycznia 2025
IFM

IFM E30560 Instrukcja

5 Stycznia 2025
IFM

IFM E30559 Instrukcja

5 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane