Instrukcja obsługi IFM ID5058


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM ID5058 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Installation Instructions
Inductive sensor
IDC
704291 / 00 09 / 2007
2
Function and features
This sensor detects metals without contact and indicates their presence by provi-
ding a switched signal.
Nominal sensing range (Sn): 50 mm;
Operating distance (Sa): 40mm (flush and over flush installation); 35mm (non-
flush installation).
(Values based on standard measurement with mild steel; a shorter sensing range
for other metals).
Installation
Mount the unit on a DIN rail or by means of a mounting fixture.
Three ways of mounting:
non-flush flush overflush
Open space around the sensing face when mounted in metal
3 x Sn
3-4mm
3-4mm
5mm
For all ways of mounting In addition for overflush mounting
3
UK
Minimum distance when several sensors of the same type are mounted:
8 x Sn
aa a
Electrical connection
Disconnect power before connecting the sensor.
The plug adapter of units with plug and socket connection can be rotated (45°
steps).
LEDs
loosen fastening nut turn plug adapter tighten fastening nut
Note: insert a miniature fuse according to the technical data sheet, if specified.
Recommendation: check the unit for reliable function after a short cirucit.
Operation
Check the safe functioning of the sensor:
The green LED is lit when the supply voltage is applied.
The yellow LED is lit when the output is switched.
The operation of the sensor is maintenance free. For perfect functioning make
sure that:
the sensing face and the open space are kept free of metal deposits and
foreign bodies, particularly for installation with the sensing face facing upwards.
EMC: The unit conforms to the requirements of EN 60947-5-2.


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: ID5058

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM ID5058, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025