Instrukcja obsługi IFM SN2301


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM SN2301 (11 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
80291240 / 00 03 / 2022
UK
Operating instructions
Switching amplifiers
VS2000 Exi
SN2301
SN2302
SR2301
PTB 01 ATEX 2075
IEC Ex PTB 07.0004
2
1 Preliminary note
1.1 Symbols used
Instructions
Cross-reference
Important note
Non-compliance can result in malfunction or interference.
Contents
1 Preliminary note 2 ...................................................................................................
1.1 Symbols used 2 ................................................................................................
2 Safety instructions 3 ...............................................................................................
2.1 Particularities of these instructions 3 ................................................................
2.2 Other important notes 3 ....................................................................................
3 Functions and features 4 ........................................................................................
4 Installation............................................................................................................4
4.1 Evaluation unit 4 ...............................................................................................
4.2 Sensors..........................................................................................................5
5 Electrical connection 6 ............................................................................................
5.1 Safety regulations according to IEC 61010-1 6 ................................................
5.1.1 For AC devices (SN23xx) 6 .....................................................................
5.1.2 For DC devices (SR2301) 6 ....................................................................
5.2 Terminal connection 7 .......................................................................................
5.3 Voltage supply (power) 7 ..................................................................................
5.4 Connection of the sensors 8 ............................................................................
5.5 Output relay 9 ...................................................................................................
6 Settings ................................................................................................................9
7 Function diagram (flow monitoring) 10 ...................................................................
8 Set-up / Operation 10 .............................................................................................
9 Maintenance, repair and disposal 10 ......................................................................
10 Technical data .................................................................................................. 11
3
UK
2 Safety instructions
2.1 Particularities of these instructions
They cover all units of the type VS2000 Exi. The only difference between the
individual units is the type of supply voltage which is indicated on the type label
of the unit.
They are part of the unit. They contain information about the correct handling of
the product.
Read them before use to familiarise yourself with operating conditions,
installation and operation.
Follow the safety instructions. The operating instructions are intended for
authorised persons according to the EMC and low voltage directives.
2.2 Other important notes
The unit must only be installed, connected and put into operation by a qualified
electrician as during the installation dangerous voltages may be exposed. The
safe function of the unit and the plant is only guaranteed when installation is
correctly carried out.
Be careful when handling the connected unit. This is only allowed by qualified
personnel due to the protection rating IP 20.
The design of the unit corresponds to the protection class II except for the
terminal blocks. Protection against accidental contact (finger-touch to IP 20)
for qualified personnel is only guaranteed if the terminal screw has been
completely screwed in. For this reason the unit must always be installed in a
control cabinet which can only be opened with a tool, for pollution degree 2 and
overvoltage category II.
In case of malfunction of the device or uncertainties always contact the manu-
facturer! Tampering with the device can seriously affect the safety of operators
and machinery. This is not permitted and leads to an exclusion of liability and
warranty.


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: SN2301

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM SN2301, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025