Instrukcja obsługi IFM PV2102


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM PV2102 (11 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
Installation instructions
Electronic pressure sensor
for industrial applications
PV2102
80286594 / 00 05 / 2019
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of keys, buttons or indications
Cross-reference
Important note
Non-compliance may result in malfunction or interference
Information
Supplementary note
CAUTION!
Warning of personal injury.
Slight reversible injuries may result.
Contents
1 Preliminary note 2 ...................................................................................................
1.1 Symbols used 2 ................................................................................................
2 Safety instructions 3 ...............................................................................................
3 Functions and features 4 .......................................................................................
3.1 Application area 4 .............................................................................................
3.2 Use in hydraulic systems 4 ..............................................................................
4 Function ...............................................................................................................5
4.1 Communication, parameter setting, evaluation 5 .............................................
4.2 Switching function 5 ..........................................................................................
4.3 IO-Link ...........................................................................................................6
5 Installation............................................................................................................6
6 Electrical connection 7 ............................................................................................
7 Parameter setting 8 ................................................................................................
7.1 Parameter setting via PC 8 ...............................................................................
7.2 Parameter setting via the memory plug 8 ........................................................
7.3 List of the parameters 9 ....................................................................................
8 Factory setting 10 ...................................................................................................
3
UK
2 Safety instructions
The device described is a subcomponent for integration into a system.
- The manufacturer is responsible for the safety of the system.
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system. This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system.
Read this document before setting up the product and keep it during the entire
service life.
The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
Only use the product for its intended purpose (→ Functions and features).
Only use the product for permissible media (→ Technical data).
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
Installation, electrical connection, set-up, programming, configuration, operation
and maintenance of the product must be carried out by personnel qualified and
authorised for the respective activity.
Protect units and cables against damage.
CAUTION!
For medium temperatures above 40 °C, parts of the unit may heat
up to over 70 °C.
> Risk of burns
Do not touch the unit
Protect the housing against contact with flammable substances
and unintentional contact.


Specyfikacje produktu

Marka: IFM
Kategoria: Nie skategoryzowane
Model: PV2102

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM PV2102, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane IFM

IFM

IFM ME5016 Instrukcja

11 Marca 2025
IFM

IFM E30542 Instrukcja

11 Marca 2025
IFM

IFM PV2102 Instrukcja

10 Marca 2025
IFM

IFM MK5361 Instrukcja

10 Lutego 2025
IFM

IFM AL2607 Instrukcja

10 Lutego 2025
IFM

IFM AL2507 Instrukcja

10 Lutego 2025
IFM

IFM AL1325 Instrukcja

7 Lutego 2025
IFM

IFM AL1304 Instrukcja

7 Lutego 2025
IFM

IFM E33211 Instrukcja

11 Września 2024

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane