Instrukcja obsługi IFM JN2100


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM JN2100 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Installation instructions
Inclination sensor JN
JN2100
JN2101
80254488/00 05/2016
UK
2
1 Functions and features
The 2-axis inclination sensor with CANopen interface enables angle levelling and
position detection of mobile machines.
Typical applications are, for example, the position detection of access platforms,
levelling of mobile cranes or set-up of mobile machines.
2-axis inclination sensors with a measuring range of:
JN2100: ±180° / 0...360°
JN2101: ±45°
2 Symbols used
Instructions
Important note
Non-compliance can result in malfunction or interference.
3 Installation
Disconnect the system from power before installation.
3.1 Fastening
Fasten the device using 4 M5 screws on a flat surface.
Screw material: steel or stainless steel.
3.2 Mounting surface
The housing must not be exposed to any torsional forces or mechanical stress.
Use compensating elements if there is no flat mounting surface available.
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment
must be adhered to.
Disconnect the installation from power and connect the unit.
3
UK
The inclination sensors are fitted with two round 5-pole M12 connectors (A-coded).
The pin connection corresponds to CiA DR-303-1.
4
2 1
3
5
1: CAN_SHLD shield
2: CAN_V+ supply voltage 24 V DC
3: CAN_GND GND
4: CAN_H H bus cable
5: CAN_L L bus cable
M12 connector CAN-In
3
1 2
4
5
1: CAN_SHLD shield
2: CAN_V+ supply voltage 24 V DC
3: CAN_GND GND
4: CAN_H H bus cable
5: CAN_L L bus cable
M12 socket CAN-Out
5 Technical data
Detailed manuals, technical data and further information at www.ifm.com.
6 Maintenance, repair and disposal
The unit is maintenance-free.
Dispose of the device in accordance with the national environmental
regulations.
7 Approvals/standards
The CE declarations of conformity and approvals can be found at www.ifm.com.


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: JN2100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM JN2100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025