Instrukcja obsługi IFM EVM030

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM EVM030 (1 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Verbinden Sie den Steckverbinder mit dem Sensor, der Pfeil
zeigt die richtige Lage der Kodierung. Um die angegebene
Schutzart zu gewährleisten, muss die Überwurfmutter mit
einem Anzugsdrehmoment von 0,6 Nm (handfest) bis 1,5 Nm
(Schlüsselmontage) angezogen werden.
Connect the connector to the sensor; the arrow indicates the
right position of the coding. To ensure the indicated
protection rating, the coupling nut must be tightened with a
tightening torque from 0.6 Nm (hand-tight) to 1.5 Nm (using
a torque wrench).
Raccorder le connecteur au capteur, la flèche indique la
bonne direction du codage. Afin d'assurer le degré de
protection indiqué, il faut serrer l'écrou avec un couple de
serrage de 0,6 Nm la main) à 1,5 Nm (avec une clé).
Montagehinweis / Mounting instruction / Instruction de montage
Beim Einsatz in rauen Umgebungen ziehen Sie die Über-
wurfmutter mit einem Schlüssel (SW14) eine Raste weiter
fest, um Schock- und Vibrationsfestigkeit zu erhöhen. Zur
Demontage verwenden Sie ebenfalls einen Schlüssel (SW14).
For applications in harsh environments tighten the coupling
nut by turning it one notch further with a key (width across
flats 14) to increase shock and vibration resistance.
For removal also use a key (width across flats 14).
Pour les applications en environnement agressif serrer
l'écrou en le tournant d'un cran d'arrêt supplémentaire, avec
une clé (cote sur plat 14), afin d'augmenter la tenue aux
chocs et vibrations. Utiliser également une clé (cote sur plat
14) pour le démontage.
Zur Demontage lösen Sie die Überwurfmutter und drücken
gleichzeitig den Steckverbinder gegen den Sensor.
For removal loosen the coupling nut and at the same time
press the connector against the sensor.
Pour le montage desserrer l'écrou et presser simultané-
ment le connecteur contre le capteur.
14
Sachnr. 704149/01 12/2007

Specyfikacje produktu

Marka: IFM
Kategoria: Niet gecategoriseerd
Model: EVM030

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM EVM030, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd IFM

IFM

IFM OJ5030 Instrukcja

10 Października 2024
IFM

IFM TD2943 Instrukcja

10 Października 2024
IFM

IFM PC5320 Instrukcja

9 Października 2024
IFM

IFM RM901S Instrukcja

9 Października 2024
IFM

IFM AC2487 Instrukcja

9 Października 2024
IFM

IFM EVM030 Instrukcja

6 Października 2024
IFM

IFM I7R209 Instrukcja

6 Października 2024
IFM

IFM NI5001 Instrukcja

6 Października 2024
IFM

IFM UIT505 Instrukcja

6 Października 2024
IFM

IFM AC5291 Instrukcja

6 Października 2024

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd

DeWalt

DeWalt DWV015 Instrukcja

10 Października 2024
Shark

Shark ION Robot RV765 Instrukcja

10 Października 2024
Crivit

Crivit IAN 351556 Instrukcja

10 Października 2024
BenQ

BenQ PH460 Instrukcja

10 Października 2024
Livarno

Livarno IAN 368684 Instrukcja

10 Października 2024
CyberPower

CyberPower PR1000ELCDRT2U Instrukcja

10 Października 2024
IMC Toys

IMC Toys 250253 Instrukcja

10 Października 2024
Powerfix

Powerfix PFRS 1.5 A2 Instrukcja

10 Października 2024