Instrukcja obsługi IFM E70586


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM E70586 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Installation instructions
FC insulation displacement connector
E70585
E70586
E70587
80271731/00 12/2017
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
Read this document before setting up the product and keep it during the entire
service life.
The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
Only use the product for its intended purpose ( Functions and features).
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
The plant manufacturer is responsible for the safety of the plant in which the
device is installed.
If the device is used in a way that is not intended by the manufacturer, the
protection supported by the device may be impaired.
Protect units and cables against damage.
3 Functions and features
E70585 / E70586
The FC insulation displacement connector carries the AS-i voltage from the flat
cable to the M12 socket.
Current rating 4 A.
The connectors E70585 and 70586 differ in the orientation of the M12 socket
(keyway).
3
UK
E70587
The FC insulation displacement connector carries the AS-i voltage and the
external 24 V supply from the flat cable to the M12 socket.
Current rating 4 A.
4 Wiring
1
3
E70586
1: AS-i +
3: AS-i -
1
3
E70585
1: AS-i +
3: AS-i -
5
1
3 4
2
E70587
1: AS-i +
2: AUX -
3: AS-i -
4: AUX +
5 Installation
Disconnect power.
Loosen screw 1 (included) and open the
device.
1: screw (tightening torque 1.65 Nm)
Choose a flat mounting surface and fix the
device on it (mounting holes 2). The mounting
screws are not supplied.
2: mounting holes


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: E70586

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM E70586, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025