Instrukcja obsługi IFM E70580


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM E70580 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Installation instructions
AS-i bus termination
E70580
7391014/00 06 / 2014
UK
2
1 Safety instructions
Please read the product description prior to set-up of the unit. Ensure that the
product is suitable for your application without any restrictions.
The unit conforms to the relevant regulations and EC directives.
Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application.
That is why installation, electrical connection, set-up, operation and
maintenance of the unit must only be carried out by qualified personnel
authorised by the machine operator.
2 Functions and features
The passive AS-i bus termination includes two different terminating resistors
(Z1 and Z2) and is used to improve the signal quality for total cable lengths of
100 m.
Three-level voltage monitoring and display for AS-Interface and AUX.
Cable lengths of up to 200 m are possible when the AS-i bus termination is
installed at the point furthest away from the AS-i power supply.
Max. current consumption < 15 mA.
3 Display
Green LED lights: AS-i voltage > 26.5 V DC
Yellow LED lights: AS-i voltage > 18 V DC
4 Installation
Disconnect power.
3
UK
Loosen screw 1 (included) and open the bus
termination.
Choose a flat mounting surface and fix the bus
termination on it (mounting holes 1).
The mounting screws are not supplied.
Preferably place the AS-i cable in the upper
profile slot (2) (terminating resistor Z1).
Should the required signal quality not be sufficient
despite a cable length of up to 200 m, place the
AS-i cable in the lower profile slot (3) (terminating
restistor Z2).
Place the cable correctly in the profile slot.
3
2
The free profile slot can be used for monitoring
the external voltage supply (AUX, black flat
cable).
If the black flat cable is not used, seal the
profile slot with a flat cable blank (E70399).


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: E70580

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM E70580, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025