Instrukcja obsługi IFM E43349


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM E43349 (7 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
Installation instructions
Variable clamp fitting
E43322
E43349
80228529 / 00 05 / 2015
UK
2
1 Safety instructions
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property can occur. That is why installation, set-up
and maintenance of the article must only be carried out by qualified personnel
authorised by the machine operator.
• Before installing and removing the clamp fitting: Make sure that no pressure
is applied to the system and there is no medium in the pipe or the tank. Also
always note the potential dangers related to extreme machine or medium
temperatures.
• Install the security cable (Figure 2) according to the instructions. This secures
the sensor in applications subjected to pressure and with insufficient adhesive
force of the clamp fitting (e.g. with insufficient tightening torque).
• Observe the max. admissible tank pressure: 6 bar
• No changes to the clamp fitting, in particular to the security cable and its
fixtures, must be made.
1.1 General notes
For use in hygienic areas to EHEDG: Adhere to the applicable EHEDG
guideline and the documentation of the respective sensor.
2 Functions and features
• Installation of binary level sensors without dead zone according to table:
Sensor Accessories
LMT104 E43349
LMT105 E43322
• The installation depth of the sensors can be adjusted to suit the individual
application(→2.1Applicationexamples).
The clamp fitting is intended for installation in existing G½ hygienic
adaptations(www.ifm.com→Datasheetsearch→Accessories).
Maximum tank pressure: 6 bar
3
UK
2.1 Application examples
Fig. 1
A
B
C
A : Use as overspill protection, variable setting of the response height.
B : Use in applications with deposits; deeper positioning in the tank.
C : Use in insulated tanks, bridging the insulation layer right into the tank
When mounted in restricted spaces: Adhere to the probe length and the
minimum distances as indicated in the operating instructions of the sensor
to avoid malfunction and damage to the sensor.


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: E43349

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM E43349, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025