Instrukcja obsługi IFM E30141


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM E30141 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Installation instructions
Siphons
E30140
E30141
UK
80012031 / 00 06 / 2014
2
1 Symbols used
Cross-reference
Important note
Non-compliance can result in malfunction or interference.
Information
Supplementary note.
2 Safety instructions
• Please read this document prior to set-up of the unit. Ensure that the product is
suitable for your application without any restrictions.
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property can occur.
• Improper or non-intended use of the article may lead to unwanted effects in
your application. That is why installation, set-up and maintenance of the article
must only be carried out by qualified personnel authorised by the machine
operator.
• In order to guarantee the correct condition of the device for the operating time it
is necessary to use the device only for media to which the wetted materials are
sufficientlyresistant(→Technicaldata).
• The responsibility whether the devices are suitable for the respective
application lies with the operator. The manufacturer assumes no liability for
consequences of misuse by the operator. Improper installation and use of the
devices results in a loss of the warranty claims.
3 Functions and features
Siphons are used to protect pressure gauges against heating due to hot media:
The extent of the obtained temperature reduction depends on the medium
used. The maximum pressures and temperatures are indicated in the
corresponding data sheets.
3
UK
4 Installation
To prevent material damage and injuries, please note the following:
• To ensure the correct function: Install siphons upwards in a vertical
direction(seedrawingbelow)!
• Installation and removal must be carried out when no pressure is
applied. Even when no pressure is applied, the components can still be
veryhot!
• Note that small quantities of the medium can leak when removing
the device. Therefore: ensure reasonable protection (e.g. protective
gogglesandprotectivegloves)!
Correct installation position:
E30140 E30141
1: The markings show where the left-hand thread begins.
5 Technical data and scale drawing
Technicaldataandscaledrawingatwww.ifm.com→Datasheetsearch→Enter
the article number.
More information at www.ifm.com


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: E30141

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM E30141, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025