Instrukcja obsługi IFM E30131


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM E30131 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Installation Instructions
Adapter
E30131
706005/00 05/2011
UK
ifm electronic gmbh • Friedrichstr. 1 • 45128 Essen • Germany
http://www.ifm.com • e-mail: info@ifm.com
2
Mounting sensor - adapter
D
A
B
C
1 2 3
Slightly grease the threads and sealing areas of the sensor and adapter with
the lubricating paste (A).
The paste must be suitable and approved for the application and compatible
with the elastomers used.
Place the sealing ring (B) in the groove (C) of the sensor.
The adapter is supplied with an EPDM O-ring. More sealing rings are available
as accessories: FKM O-ring, order no. E30123.
Screw the sensor into the adapter until it is hand-tight.
Clamp the sensor + adapter into a clamping device (D). Tighten the clamping
device only slightly so that the adapter does not warp.
Tighten the sensor using a spanner until you can feel the end stop (this cor-
responds to a maximum tightening torque of 35 Nm). Note: Further tightening
may affect the sealing effect.
Technical data and further information at www.ifm.com


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: E30131

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM E30131, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025