Instrukcja obsługi IFM E30052


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM E30052 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Installation Instructions
Welding adapter
with Aseptoflex thread
E30052
706010/00 05/2011
UK
2
A
B
B
1 2
A: Groove for the O-ring; the adapter is installed using 2 O-rings of different materials: Viton
(fitted), EPDM-O-Ring (enclosed).
B: Marking for alignment.
Order no. Type Material Permissible
overload pressure*
E30052 Aseptoflex thread - Ø 50 mm stainless steel (316S12) 50 bar
* for the connection sensor - adapter
The welding operation must be carried out by authorised personnel.
It must be carried out carefully and according to state-of-the-art tech-
nology.
During welding and the following cooling phase, neither sensor nor
O-ring must be in place.
The surfaces must be free from soiling of any kind.
Welding tools must be suitable for the adapter and wall material.
1 Preparations
Bore a hole in the pipe or housing wall with the outside diameter of the adapter
(max. oversize: 0.2 mm).
If possible, screw a cover plug into the adapter (order no E30064).
3
UK
2 Welding operation
3 4
The power of the welding device must be adapted to the thickness of the
wall.
Adapter alignment: Turn the marking to the position provided for the connector /
display of the screwed sensor (see figure 2).
Fix the adapter at several points with sufficient holding force, apply the fixing
points at equal distance opposite each other (see figure 3).
Apply the welding seams between the fixing points opposite each other (see
figure 4). Ensure sufficient intervals between the individual sections (cooling
phases to avoid glowing through / warping of the adapter due to overheating).
3 After welding
Let the adapter cool down.
Clean the thread from welding residues.


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: E30052

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM E30052, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane IFM

IFM

IFM PN7043 Instrukcja

28 Stycznia 2025
IFM

IFM MGS213 Instrukcja

28 Stycznia 2025
IFM

IFM MGS214 Instrukcja

28 Stycznia 2025
IFM

IFM MFS224 Instrukcja

28 Stycznia 2025
IFM

IFM MFS225 Instrukcja

28 Stycznia 2025
IFM

IFM MFS228 Instrukcja

28 Stycznia 2025
IFM

IFM PN2043 Instrukcja

28 Stycznia 2025
IFM

IFM ID5058 Instrukcja

28 Stycznia 2025
IFM

IFM EVT728 Instrukcja

28 Stycznia 2025
IFM

IFM EVF729 Instrukcja

28 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025