Instrukcja obsługi ICOM ICM502D


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ICOM ICM502D (74 stron) w kategorii walkie talkie. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/74
INSTRUCTION MANUAL
iM502A
VHF MARINE TRANSCEIVER
FOREWORD
Thank you for purchasing this Icom product. The IC-
M502A V
HF MARINE TRANSCEIVER
is designed and built
with Icom’s state of the art technology and craftsman-
ship. With proper care, this product should provide you
with years of trouble-free operation.
We want to take a couple of moments of your time to
thank you for making the IC-M502A your radio of
choice, and hope you agree with Icom’s philosophy of
“technology first.” Many hours of research and devel-
opment went into the design of your IC-M502A.
D
FEATURES
Standard 4
″×
6
flush mount design
Built-in DSC meets RTCM SC101 require-
ment
Rugged waterproof construction
NMEA Input/Output
Optional COMMANDMIC®is connectable
Icom, Icom Inc. and the logo are registered trademarks
of Icom Incorporated (Japan) in the United states, the United
Kingdom, Germany, France, Spain, Russia and/or other coun-
tries. COMMANDMIC is a registered trademark of Icom
Incorporated (Japan) in the United states.
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the trans-
ceiver.
SAVE THIS INSTRUCTION MANUAL. This
manual contains important safety and operating in-
structions for the IC-M502A.
CLEAN THE TRANSCEIVER AND MICROPHONE
THOROUGHLY WITH FRESH WATER after exposure to
water including salt water, otherwise, the keys and
switches may become inoperable due to salt crystallization.
i
ii
IN CASE OF EMERGENCY
If your vessel requires assistance, contact other vessels and
the Coast Guard by sending a distress call on Ch 16.
Or, transmit your distress call using digital selective calling on
Ch 70.
USING CHANNEL 16
DISTRESS CALL PROCEDURE
1. “MAYDAY MAYDAY MAYDAY.”
2. “THIS IS ...............” (name of vessel)
3. Your call sign or other indication of the vessel (AND 9-
digit DSC ID if you have one).
4. “LOCATED AT ...............” (your position)
5. The nature of the distress and assistance required.
6. Any other information which might facilitate the rescue.
USING DIGITAL SELECTIVE CALLING (Ch 70)
DISTRESS CALL PROCEDURE
1. While lifting up the switch cover, push and hold
[
[DISTRESSDISTRESS]
]for 5 sec. until you hear 5 short beeps
change to one long beep.
2. Wait for an acknowledgment from a coast station.
Channel 16 is automatically selected.
3. Push and hold [
[PTT
PTT]
], then transmit the appropriate
information as at above.
NOTE
A WARNING STICKER is supplied with the transceiver.
To comply with FCC regulations, this sticker must be affixed in
such a location as to be readily seen from the operating con-
trols of the radio as in the diagram below. Make sure the cho-
sen location is clean and dry before applying the sticker. (p. 42)
EXAMPLE


Specyfikacje produktu

Marka: ICOM
Kategoria: walkie talkie
Model: ICM502D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ICOM ICM502D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje walkie talkie ICOM

ICOM

ICOM IC-F27SDR Instrukcja

11 Września 2024
ICOM

ICOM ICM600 Instrukcja

11 Września 2024
ICOM

ICOM IM3EURO Instrukcja

31 Sierpnia 2024
ICOM

ICOM IC-F29DR2 Instrukcja

28 Sierpnia 2024
ICOM

ICOM ICGM1500 Instrukcja

25 Sierpnia 2024
ICOM

ICOM ICM402 Instrukcja

20 Sierpnia 2024
ICOM

ICOM ICM502D Instrukcja

20 Sierpnia 2024
ICOM

ICOM MR1000TII Instrukcja

17 Sierpnia 2024
ICOM

ICOM MR1000RII Instrukcja

16 Sierpnia 2024
ICOM

ICOM ICM2M Instrukcja

13 Sierpnia 2024

Instrukcje walkie talkie

Najnowsze instrukcje dla walkie talkie