Instrukcja obsługi Icarus Blue 90010010

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Icarus Blue 90010010 (21 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/21
USER MANUAL
(90010000 STANDARD)
A PRODUCT OF THE ICP GROUP | WWW.ICPGROUP.EU V.2.11.EN
A PRODUCT OF THE ICP GROUP | WWW.ICPGROUP.EU PAGE 1
USER MANUAL
ABOUT THIS USER MANUAL
This user manual is intended for end-users and installers of these receivers.
The purpose of this manual is to provide the user with all necessary information to ensure a correct, ecient and safe
use of the product (during its lifetime), even in the event of a reasonably foreseeable misuse.
This manual is designed to facilitate the installation, commissioning, use, maintenance and disposal of the non-return
modules.
This manual is intended to be carefully read by the user and should be completely understood, not leaving any un-
certainties, before use and installation of the product.
INTRODUCTION
The product‘s purpose is to switch electric loads ON and / or OFF. The end user is able to switch a load ON and / or OFF by
using a mobile iOS or Android App, which connects the smart device via wireless technology to the ICARUS blue receiver.
By touching the buttons in the main screen of the mobile app, the corresponding output will be activated or deactivated.
The product is designed to be used in systems with a voltage range from 9 - 36 Volts. The load of the whole system may
never result in exceeding a total maximum current of 10 Amps.
The ICARUS blue receiver has an internal memory to store the app settings. When another user connects his / her
smart device to the receiver, the saved settings will be loaded automatically.
CONTENTS OF THE PACKAGE
Please check the completeness of the box‘s contents:
ICARUS blue device
Connection cable
Quick start guide
SYMBOL DESIGNATION
Separate from waste processing
after expiration of the service life.
Product produced in accordance
with EU directives.
Attention / Danger
Before use, read the user manual.
A PRODUCT OF THE ICP GROUP | WWW.ICPGROUP.EU PAGE 2
USER MANUAL
SAFETY REGULATIONS
General
The user should have read this user manual before using the device for the first time and its content should have been
understood. If there are questions and / or uncertainties before the first use, you need to contact your supplier for
clarification.
This user manual must also be included when this device is used by any third party.
Therefore:
Losses incurred as a result of not going through the safety-requirements is not covered under warranty. We accept
no liability for any consequential damages.
We have no liability for property damage or personal injury caused by improper use or non-compliance with safety
regulations. In such cases, the warranty will expire.
This product is not a toy and is NOT intended for use by children.
DO NOT leave packaging material lying around. This can be hazardous material for children.
DO NOT open and / or disassemble and / or alter the device. This will expire the warranty.
DO NOT put the device under mechanical pressure.
The user must always comply with the safety and operating instructions, also from all other devices and / or
applications associated with the product.
When installing the device, make sure the cable is not crushed, kinked or damaged in any way, for instance by sharp
edges.
Consult an expert if you are unsure about the proper use, safety or connection of the device.
Operating
Only use the device after having read the user manual thoroughly and having complete understanding, without any
uncertainties, concerning the use and operation of the application where it is used in or for.
DO NOT operate the device in an environment with lots of dust, flammable gases, vapours or solvents. This increases
the risk of fire and explosions.
When using and operating the app, the user must have complete overview of the work area.
DO NOT use the device if it is damaged. In this case, discard the product in an environmental friendly manner.
Safe operation is not possible anymore when :
The product has sustainable visible damage.
The product is operating poorly or not functioning at all.
Smoke, burning smell, discoloration of the product.
Power supply
Only use the product within a range of 9 to 36 Volt dc.
Overload
Make sure the product is neither mechanically nor electrically overloaded. This may damage the device and cause
fire or electric shock.

Specyfikacje produktu

Marka: Icarus Blue
Kategoria: Niesklasyfikowane
Model: 90010010

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Icarus Blue 90010010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Icarus Blue

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024