Instrukcja obsługi Ibiza Sound SA500

Ibiza Sound odbiornik SA500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ibiza Sound SA500 (13 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/13
1
P
PO
OW
WE
ER
R
A
AM
MP
PL
LI
IF
FI
IE
ER
RS
S
SA500 SA1000 SA2000– –
INSTRUCTION MANUAL
MANUEL D’UTILISATION
BEDIENUNGSANLEITUNG
H ANDLEIDING
Imported from China by
LOTRONIC S.A.
Avenue Zénobe Gramme 9
B-1480 Saintes
2
IMPORTANT SAFETY INSTRUCTIONS
1) Read the manual prior to using this unit and keep it for future reference.
2) Adhere to all warnings and instructions marked on the unit and . contained in the manual
3) Don’t place the unit close to water, e.g. in a bathroom, near a wash tub, a swimming pool, etc.
4) The unit must match carriage and rack recommended by the manufacturer.
Sudden stops, great power and rough surface may cause combination turns over.
5) Keep away from heat sources such as radiator, stove and amplifier etc.
6) Operate the unit only with the rated power supply. Please ask your dealer or local power supply
company if you are not sure about your type of power supply. If the unit is operated with batteries or
other power supplies, please refer to this booklet.
7) Do not walk on or squeeze the power cord.
8) Clean this unit with a soft cloth. Prevent water and/or other liquids the housingto enter into .
9) Unplug the power cord if the unit is not used for a long time or during a thunderstorm to prevent
voltage surges to damage the inner circuitry.
10) Prevent objects s and liquid to enter into unit.
11) If one of the following happens, refer to qualified service personnel:
A) Power cord or plug a damaged; or
B) An object or liquid has entered into the unit; or
C) The unit has been exposed to rain ; or
D) do The unit esn’ t work; or
E) The unit has fallen or doesn’t work normally.
12) Repair ---Do not attempt to repair the unit yourself. All repairs must be carried out by a qualified
technician. The user is only allowed to perform manipulations, settings and controls specified in this
manual.
13) Ventilation --- Do not cover the ventilation openings to prevent overheating of the unit. Do not place
the unit on bed, blanket, sofa or similar soft surface. Do not place unit inside a bookcase, a closed
cupboard, etc.
14) Accessories---Not use parts that hare not recommended by the manufacturer in order to avoid
damage.
15) Auxiliary equipment ---Do not place this unit on unstable vehicle, shelf, tripod or table. It will cause
serious harm to child or adult if the unit falls down use the vehicle, shelf, tripod or table. Please
recommended by the manufacturer.
16) Spare parts---If the unit requires sspare part , use only spares recommended by the manufacturer and
that are in all aspects identical to the original parts. .
17) Safety check---After repairing, repairer must test the unit for security.
GB
3
CONTROLS
1. Power: Press this button to power ON/OFF the unit.
2. L Volume: Use this knob to adjust the volume of left channel of main speaker output
3. R Volume: Use this knob to adjust the volume of right channel of main speaker output.
SA500 & SA1000
1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3. 1/4” Line input: Use suitable jacks to connect the line signal source to the 1/4” line input of the amplifier.
4. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
5. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs, the impedance
of each speaker must be 8ohms at least to protect the amplifier.
6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.
SA2000
1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
4. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs, the impedance
of each speaker must be 8ohms at least to protect the amplifier.
5. LINK output: Connect the XLR input signal to another amplifier.
6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.

Specyfikacje produktu

Marka: Ibiza Sound
Kategoria: odbiornik
Model: SA500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ibiza Sound SA500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Ibiza Sound

Ibiza Sound

Ibiza Sound SA500 Instrukcja

18 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ESX

ESX Signum SXE250.2 Instrukcja

8 Stycznia 2025
QSC

QSC CX4 Instrukcja

7 Stycznia 2025
QSC

QSC DPA4.2Q Instrukcja

7 Stycznia 2025
QSC

QSC USA 400 Instrukcja

7 Stycznia 2025
QSC

QSC DPA4.3Q Instrukcja

7 Stycznia 2025
QSC

QSC USA 900 Instrukcja

7 Stycznia 2025
QSC

QSC SRA1222 Instrukcja

7 Stycznia 2025
QSC

QSC 1400 Instrukcja

7 Stycznia 2025
QSC

QSC 1200 Instrukcja

7 Stycznia 2025
QSC

QSC CX12 Instrukcja

7 Stycznia 2025