Instrukcja obsługi I-TEC BTHF-SOLAR

I-TEC zestaw samochodowy BTHF-SOLAR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla I-TEC BTHF-SOLAR (32 stron) w kategorii zestaw samochodowy. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

User’s Guide • Benutzerhandbuch • Uživatelská příručka

•Instrukcja obsługi • Užívateľská príručka

i-tec SOLAR - Bluetooth

MULTIPOINT Handsfree CarKit

(BTHF-SOLAR)

Safe driving Mobile/PDA Personal

Computer

Up to

800h

standby time

Up to

13h

talk time

Solar Charge

I-TEC SOLAR - BLUETOOTH MULTIPOINT HANDSFREE CARKIT

Thank you for purchasing our product. Please kindly review the informations contained in the guide thoroughly.

i-tec SOLAR - Bluetooth MULTIPOINT Handsfree CarKit is equipped by a digital technology for wireless communication. This Handsfree device

contains a DSP processor (Digital Signal processor) that eliminates interference, improves a signal reception and guarantees exceptional

sound quality. Handsfree CarKit is portable, very compact, fully wireless; it could communicate with any mobile telephone that supports

and fulﬁls the Bluetooth protocol of the proﬁle Headset or Handsfree.

i-tec SOLAR is designed as a portable handsfree, enabling the user to communicate freely without a need to hold the telephone in hand.

Do not forget: When driving, use the Handsfree safely and in compliance with valid legislative of given country.

Package contents

• Bluetooth® i-tec SOLAR

• Automotive power supply (12 / 24 V)

• Interconnecting cable for charging (USB A-USB Mini)

• Windscreen holder

• Guide

Speciﬁcations

• standard: Bluetooth v2.1+ EDR (BlueCore 5 chip)

• solar panel for charging

• frequency: 2,4-2,480 GHz

• maximum operating radius: Up to 10 m, Bluetooth Class2

• supported proles: Handsfree a Headset 1.5 (selectable when pairing)

• talk time: Up to 13 hours

• stand-by time: Up to 800 hours

• period of battery recharging:

USB cable: solar panel: approximately 3h (rst charging 3,5h); approximately 18h

• battery type: Li-ion 3,7V/550mAh

• car charger: input =12-24V / output =5V/400mA

• loudspeaker: 30 mm

• microphone: With function of suppressing echo cancellation

• weight: 133.3 g

• dimensions: 123 x 46 x 20 mm

• other:

- full duplex equipment

- compatible with all currently available telephones with Bluetooth

- integrated „smart“ DSP processor (Digital Signal Processor), eliminating interference and echo

- supporting voice dialing (provided it is supported by the telephone)

- supporting redial / only for the prole Handsfre

- possibility of pairing with more telephones

- one button for receipt and end of the call

- pushbutton for refusing the call

- controls of loudness

1 - 2

IMPORTANT ADVICE

Prior to rst use, the Handsfree batteries’ kit must be charged at least 3,5 hours!

CHARGING THE HANDSFREE

Handsfree could be charged any time in your car with aid of vehicle power supply or, through the USB port PC/NB.

Handsfree indicates by blinking the red LED 1x/3s that batteries are at. Using solar power charge, the operation time (talk time and

standby time) will be extended continuously without any additional charge required by the car charger.

1. Connect the charger into a connector for the charger (6).

LED diode Charge (battery charging) (5):

a. lights red: Battery has still a low charge

b. red ceases to light (appx. after 3h of charging): Battery is fully charged

2. After the batteries are fully charged, disconnect the charger.

LED diode Bluetooth (5): Light is blinking blue (in case it is paired with mobile telephone).

Note: 1. You must charge Handsfree by power adaptor, if you do not use Handsfree for more than several months. Red LED will shine

only after 15-35 minutes charging time.

2. You can charge Handsfree CarKit owing to solar panel on the back side of Handsfree as well. If the Handsfree receives

sufﬁcient sunlight for 2 hours, you can talk for duration of up 1 hour. Solar panel is able to charge internal battery from zero

capacity to full capacity for about 18 hours.

USE OF HANDSFREE

Description of Handsfree

1. Mute Button

2. Volume Up (VOL +)

3. Windscreen Holder

4. Microphone

5. Multi-function Button (MFB) / under this button is LED (blue and red)

6. Micro USB Charging Socket

7. Volume Down (VOL-)

8. Speaker

Installation into car

1. Use low pressure to input Handsfree into windscreen holder’s guiding clips (with mounted suction cups) up to utmost position. Release

Handsfree from holder – it is backward motion with low pressure again.

2. Press Handsfree with help suction cups on facies in a car (e.g. glass). Handsfree must be installed facing to user – then you can easily

use it while driving a car.

Note:

- We recommend to clear suction cups and glass before mounting of windscreen holder – then holder will ﬁrmly hold and it will not fall

off from glass during driving car

- Holder has foam plastic pillars also – when you want to use holder without suction cups; foam plastic pillars are primarily identiﬁed for

prevention of solar panel; please, foam don’t remove plastic pillars!















Specyfikacje produktu

Marka:	I-TEC
Kategoria:	zestaw samochodowy
Model:	BTHF-SOLAR
Waga produktu:	133.3 g
Czas rozmowy:	13 h
Czas gotowości:	800 h
Technologia łączności:	Bezprzewodowy
Wersja Bluetooth:	2.1+EDR
Czas ładowania:	180 min
Typ ekranu:	Nie
Liczba przycisków:	3
Maksymalny zasięg działania:	10 m
Wymiary produktu (SxGxW):	123 x 46 x 20 mm