Instrukcja obsługi I-PRO WV-X35402-F2LM

I-PRO Kamera monitorująca WV-X35402-F2LM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla I-PRO WV-X35402-F2LM (7 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
1
About the user manuals
Product documentation is composed of the following documents.
• Provides information about “Precautions”, Installation Guide (this document):
“Precautions for installation” and the installation method.
• Web Guide (Refer to the the link on the following product information website):
Includes installation videos, basic functions, and basic operation methods for this device.
• User manual (Refer to the link on the following product information website):
This section describes the software operating instructions common to each model.
https://i-pro.com/products_and_solutions/en/surveillance/documentation-database
"<Control No.: C****>" used in these documents should be used to search for
information on our technical information website
(
https://i-pro.com/products_and_solutions/en/surveillance/learning-and-support/
knowledge-base/technical-information
) and will guide you to the right information.
• Before attempting to connect or operate this product, please read these instructions
carefully and save Important Safety Instructions leaflet for future use.
• microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.
• The external appearance and other parts shown in this manual may differ from the actual product within the
scope that will not interfere with normal use due to improvement of the product.
Installation Guide
Included Installation Instructions
Network Camera
For professional use only
Model No.
WV-X35000 Series
WV-S35000 Series
WV-S32000 Series
Authorised Representative in EU:
i-PRO EMEA B.V.
Laarderhoogtweg 25, 1101 EB
Amsterdam, Netherlands
i-PRO EMEA B.V. UK Branch
1010 Cambourne Business Park,
Cambridgeshire CB23 6DP
© i-PRO Co., Ltd. 2023
WV-S35402-F2L
Outdoor use
Outdoor use
Indoor use
This manual covers the models: WV-X35000 Series (WV-X35402-F2LM,
WV-X35302-F2LM, WV-X35402-F2L, and WV-X35302-F2L),
WV-S35000 Series (WV-S35402-F2L and WV-S35302-F2L),
WV-S32000 Series (WV-S32402-F2L and WV-S32302-F2L).
Tokyo, Japan
https://www.i-pro.com/
C0923-1024
PGQP3712YA
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take
them to applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
Note for the battery symbol (bottom symbol)
This symbol might be used in combination with a chemical symbol. In this case it complies with
the requirement set by the Directive for the chemical involved.
NOTE: This equipment has been tested and
found to comply with the limits for a Class A digi-
tal device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instruction man-
ual, may cause harmful interference to radio com-
munications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case
the user will be required to correct the interfer-
ence at his own expense.
FCC CAUTION: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Supplier’s Declaration of conformity
Trade name : i-PRO
Model No. : WV-X35402-F2LM, WV-X35302-F2LM
WV-X35402-F2L, WV-X35302-F2L
WV-S35402-F2L, WV-S35302-F2L
WV-S32402-F2L, WV-S32302-F2L
Responsible Party :
i-PRO Americas Inc.
8550 Fallbrook Drive, Suite 200 Houston,
Texas 77064
Support Contact: 1-800-513-5417
For U.S.A.
CAN ICES-3(A)/NMB-3(A)
For Canada
The model number and serial number of this
product may be found on the surface of the
unit.
You should note the model number and serial
number of this unit in the space provided and
retain this book as a permanent record of your
purchase to aid identification in the event of
theft.
Model No.
Serial No.
For U.S.A.
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two condi-
tions : (1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
Méthode d’installation
Vis de fixation recommandée
La capacité de traction
minimale requise
Monter directement la caméra vidéo sur la surface
d’installation. M4 x 16 mm {5/8 pouces}* /
2 él. 196 N {44 lbf}
Installer la caméra vidéo sur une boîte de groupe/
boîte de jonction double.
Installer la caméra vidéo à l’aide de la platine de
fixation d’installation exclusivement conçue.
Se référer au manuel d’utilisation de chaque platine
de fixation.
* La longueur de la vis est un exemple lors de l’installation de la caméra au plafond ou sur un mur
robuste d’une épaisseur de 20 mm {25/32 pouces} ou plus.
For U.S.A.
2
Do not install this product in a restricted or prohibited environment.
Failure to observe this may result in injury, accident, or malfunction due to falling.
Please check the safety precautions common to all models on the website above and the installation
precautions in the Installation Guide.
Refer installation work to the dealer.
Installation work requires technique and experience. Failure to observe this may cause fire, electric
shock, injury,or damage to the product. Be sure to consult the dealer.
Install the product accurately and securely on an installation surface in accordance with the
installation instructions.
Failure to observe this may cause injury or accidents.
Take measures of protection against this product falling.
Failure to observe this may cause a drop resulting in injury.
Securely fix the product to the installation surface using screws or anchors. If the fall prevention wire is
included, be sure to install it.
Stop the operation immediately when something is wrong with this product.
When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of
the product has deteriorated, continued use will cause a fire or fall of the product resulting in injury, or
damage to property.
In this case, turn the power off immediately and contact qualified service personnel for service.
Conduct periodic inspections.
Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents.
Consult the dealer for the inspections.
Be sure to turn off the power before inspection or maintenance.
WARNING:
• Operation of this product in a residential environment could cause radio interference.
Caution: Notice:
• The DC power supply connected to the camera
must be in the same building.
• The network camera is only intended for a
connection to an ethernet or PoE network
without routing to the outside plant.
• This product has no power switch. Be sure
to install disconnect devices such as a circuit
breaker to shut down the main power of power
supplying equipment to this product.
• Before attempting to connect or operate this
product, please read these instructions carefully.
• This product is not suitable for use in locations
where children are likely to be present.
• Do not install this product in locations where
ordinary persons can easily reach.
• This product is a professional equipment.
• For information about screws and other
parts required for installation, refer to the
corresponding section of this document.
: Direct current symbol
: For indoor use only
Precautions
In order to prevent harm to people and damage to property, it explains
what must be observed without fail. The safety statements common to all
i-PRO network camera models are posted on the website linked from the
twodimensional barcode on the right. Please be sure to confirm it.
https://i-pro.com/products_and_solutions/en/surveillance/learning-and-
support/knowledge-base/safety-instructions
3

Specyfikacje produktu

Marka: I-PRO
Kategoria: Kamera monitorująca
Model: WV-X35402-F2LM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z I-PRO WV-X35402-F2LM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca I-PRO

I-PRO

I-PRO WV-U2542LA Instrukcja

11 Grudnia 2024
I-PRO

I-PRO B-200-PTZ Instrukcja

11 Grudnia 2024
I-PRO

I-PRO WV-U2130LA Instrukcja

11 Grudnia 2024
I-PRO

I-PRO WV-X35402-F2LM Instrukcja

11 Grudnia 2024
I-PRO

I-PRO WV-S8531N Instrukcja

7 Grudnia 2024
I-PRO

I-PRO WV-U65301-Z1 Instrukcja

7 Grudnia 2024
I-PRO

I-PRO WV-S22600-V2LG Instrukcja

7 Grudnia 2024
I-PRO

I-PRO WV-S65301-Z1 Instrukcja

7 Grudnia 2024
I-PRO

I-PRO WV-SBV131M Instrukcja

8 Października 2024
I-PRO

I-PRO WV-SFV781L Instrukcja

8 Października 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

ClearOne

ClearOne Unite 260 Pro Instrukcja

11 Grudnia 2024
Imou

Imou Cubo1 Instrukcja

11 Grudnia 2024
Foscam

Foscam PD5 Instrukcja

10 Grudnia 2024
TP-Link

TP-Link InSight S245 Instrukcja

10 Grudnia 2024
Foscam

Foscam R8M Instrukcja

10 Grudnia 2024
AViPAS

AViPAS AV-2000W Instrukcja

10 Grudnia 2024
Abus

Abus TVVR33602 Instrukcja

9 Grudnia 2024
Abus

Abus TAS102 Instrukcja

9 Grudnia 2024
AVer

AVer UE1 Instrukcja

8 Grudnia 2024
Hikvision

Hikvision DS-2TD2637-15 Instrukcja

8 Grudnia 2024